Comparative results of numerical simulation of the process of hot forging of porous preforms with an axial hole for two deformation schemes are presented: in a die with a flash groove on the inner surface of the forged workpiece cavity and in a closed die. A significant difference in the nature of the evolution of the distribution of deformations and density over the cross-section of the workpiece for the two considered schemes is noted. It is shown that forging in a die with an open volume provides significantly higher degrees of material deformation during forging compared to closed forging, which should lead to an increase in the quality of the structure and final properties of the forged material.
DorofeevYG, GasanovBG, DorofeevVY.Industrial technology of hot pressing of powder products. Moscow: Metallurgiya; 1990.
2.
HendricksonAA, MachmeierPM, SmithDW.Impact forging of sintered steel preforms. Powder Metall. 2000;43(4):327–344.
3.
QuiJW, LiuY, LiuYB, . Microstructure and mechanical properties of titanium alloy connecting rod made by powder forging process. Mater Des. 2012;33:213–219.
4.
SutradharG, JhaAK, KumarS.Production of sinter-forged components. J Mater Process Technol. 1994;41:143–169.
5.
BrownG.The powder-forging process: a review of the basic concept and development prospects. Powder Metall. 1971;14(27):124–143.
6.
IliaE, O'NeillM, TuttonK, . Benchmarking the industry: powder forging makes a better connecting rod. SAE Trans. 2005;114(5):340–352.
7.
WangS, WuYK, WangHL, . Investigation on the hot deformation behaviour of sintered and forged specimens to improve the forging safety of powder forged products. Powder Metall. 2021;64(4):273–282.
8.
ShimaS, OyaneM.Plasticity theory for porous metals. Int J Mech Sci. 1976;18:285–291.
9.
KhoeiAR.Computational plasticity in powder forming processes. Elsevier Science; 2005.
10.
BaglyukG.Densification and shape change of porous billets in closed and open dies. In: Zavaliangos A, Laptev A, editors. Recent developments in computer modeling of powder metallurgy processes. NATO science series. Amsterdam: IOS Press; 2001. p. 163–168.
11.
DoroshkevichEA, GorokhovVM, RyabovIN, . Finding an optimum shape of a porous blank in hot forging. Powder Metall Met Ceram. 1988;27:269–272.
12.
KuhnHA, DowneyCL.How flow and fracture affect design of preforms for powder forging. The Int J Powder Metall Powder Technol. 1974;10(1):59–66.
13.
NarayanasamyR, SenthilkumarV, PandeyKS.Some aspects on hot forging features of P/M sintered iron preforms under various stress state conditions. Mech Mater. 2006;38:367–386.
14.
BockstiegelG, BjörkU.The influence of preform shape on material flow, residual porosity, and occurrence of flaws in hot-forged powder compacts. Powder Metall. 1974;17(33):126–139.
15.
AntesHW.Processing and properties of powder forgings // powder metallurgy for high performance applications. Syracuse (NJ): Syracuse University Press; 1972.
16.
BuckinghamRC, ArgyrakisC, HardyMC, . The effect of strain distribution on microstructural developments during forging in a newly developed nickel base superalloy. Mater Sci Eng A. 2016;654:317–328.
17.
NarayanasamyR, SenthilkumarV, PadneyK.Some features of hot forging of powder metallurgy sintered high strength 4% titanium carbide composite steel preforms under different stress state conditions. Mater Des. 2008;29:1380–1400.
18.
BagliukG, ShishkinaY. The influence of severe plastic deformation on structure and properties of aluminum matrix composite. Euro PM 2014 Congress Proceedings; 2014.
19.
DorofeevVY, EgorovSN.Interparticle splicing during the formation of hot–deformed powder materials. Moscow: Metallurgizdat; 2003.
20.
ShishkinaYA, BaglyukGA, KurikhinVS, . Effect of the deformation scheme on the structure and properties of hot-forged aluminum-matrix composites. Powder Metall Met Ceram. 2016;55:5–11.
21.
PavlovVA, NosenkoMI.An investigation of the processes of hot deformation of porous blanks of titanium, copper, and aluminum and optimization of them. Powder Metall Met Ceram. 1994;32:768–772.
22.
CeschiniL, MinakG, MorriA, . Forging of the AA6061/23 vol.% Al2O3 composite: effects on microstructure and tensile properties. Mater Sci Eng A. 2009;513–514:176–184.
23.
PavlovVA, NosenkoMI.Effect of the stress-strain state on the densification of metal powders (powder preforms) during hot forging. Powder Metall Met Ceram. 1992;31:103–107.
24.
BaglyukGA.Consolidation of a porous material in hot pressing in a closed mold fitted with a compensator. Powder Metall Met Ceram. 1998;37:249–252.
25.
BagliukGA, KyryliukSF.Numerical analysis of porous blank die forging in the die with the implementation of active friction forces. Powder Metall Funct Coat. 2020;3:17–24. Russian.
26.
BaglyukGA.Modeling the process of upsetting a porous ring in a die with contact friction taken into account. Powder Metall Met Ceram. 1995;33:14–17.
