The silicate conversion coating was modified with nano-silica and applied on the surface of AA2024 by dip-coating technique. The mechanical properties of produced modified silicate layer were investigated by the pencil scratch hardness, cross-cut and abrasion resistance tests. The characterisation of coated surface before and after the tests was studied with optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy and atomic force microscopy. Addition of nano-silica to the silicate coating caused an enhancement in the SiO2:K2O ratio. The results showed that the homogeneity of coating surfaces increased in the presence of nano-silica. The wear and scratch resistance of the modified silicate layer improved against the sliding conditions. In addition, the adhesion of coating layer to the substrate metal increased.
AsgharzadehH. and McQueenH. J.: ‘Grain growth and stabilisation of nanostructured aluminium at high temperatures: review’, Mater. Sci. Technol., 2015, 31, 1016–1034. doi: 10.1179/1743284714Y.0000000706
2.
ZhangD. and ShibayanagiT.: ‘Material flow during friction stir spot welding of dissimilar Al2024/Al materials’, Mater. Sci. Technol., 2015, 31, 1077–1087. doi: 10.1179/1743284714Y.0000000674
3.
HeX.-H., ShiH.-J., ZhangY.-D., YangZ.-G., WilkinsonC. E., NealA. L. and NorfolkM.: ‘Mechanical properties and microstructure of Al/Al laminated structure produced via ultrasonic consolidation process’, Mater. Sci. Technol., 2015, in press, doi:https://dx-doi-org.web.bisu.edu.cn/10.1179/1743284715Y.0000000045.
4.
GoueffonY., MabruC., LabarrereM., AruraultL., TononC. and GuigueP.: ‘Mechanical behavior of black anodic films on 7175 aluminium alloy for space applications’, Surf. Coat. Technol., 2009, 204, 1013–1017. doi: 10.1016/j.surfcoat.2009.06.026
5.
ChinI. K., YamF. K., ChaiY. and HassanZ.: ‘Comparative study of porous anodic alumina: effects of aluminium deposition methods’, Mater. Sci. Technol., 2015, 31, 709–714. doi: 10.1179/1743284714Y.0000000651
6.
WheelerJ. M., CurranJ. A. and ShresthaS.: ‘Microstructure and multi-scale mechanical behavior of hard anodized and plasma electrolytic oxidation (PEO) coatings on aluminum alloy 5052’, Surf. Coat. Technol., 2012, 207, 480–488. doi: 10.1016/j.surfcoat.2012.07.056
7.
VojkuvkaL., SantosA., PallarèsJ., Ferré-BorrullJ., MarsalL. F. and CelisJ. P.: ‘On the mechanical properties of nanoporous anodized alumina by nanoindentation and sliding tests’, Surf. Coat. Technol., 2012, 206, 2115–2124. doi: 10.1016/j.surfcoat.2011.09.040
Pommiers-BelinS., FrayretJ., UhartA., LedeuilJ. B., DupinJ. C., CastetbonA. and Potin-GautierM.: ‘Determination of the chemical mechanism of chromate conversion coating on magnesium alloys EV31A’, Appl. Surf. Sci., 2014, 298, 199–207. doi: 10.1016/j.apsusc.2014.01.162
10.
KazemiM., DanaeeI. and ZaareiD.: ‘Deposition and corrosion behavior of silicate conversion coatings on aluminum alloy 2024’, Materialwiss. Werkst., 2014, 45, 574–581. doi: 10.1002/mawe.201400212
11.
KeC., PohlK., BirbilisN. and ChenX.-B.: ‘Protective strontium phosphate coatings for magnesium biomaterials’, Mater. Sci. Technol., 2014, 30, 521–526. doi: 10.1179/1743284714Y.0000000508
12.
TangH., XinT. Z., LuoY. and WangF. P.: ‘In vitro degradation of AZ31 magnesium alloy coated with hydroxyapatite by sol–gel method’, 2013, 29, 547–552.
13.
BahriH., DanaeeI. and RashedG. R.: ‘The effect of curing time and curing temperature on the corrosion behavior of nanosilica modified potassium silicate coatings on AA2024’, Surf. Coat. Technol., 2014, 254, 305–312. doi: 10.1016/j.surfcoat.2014.06.041
14.
KannanA. G., ChoudhuryN. R. and DuttaN. K.: ‘Electrochemical performance of sol–gel derived phospho-silicate-methacrylate hybrid coatings’, J. Electroanal. Chem., 2010, 641, 28–34. doi: 10.1016/j.jelechem.2010.01.016
15.
BahriH., DanaeeI., RashedG. R. and ZaareiD.: ‘Effect of silica ratio on the corrosion behavior of nano-silica potassium silicate coatings on aluminum alloy 2024’, J. Mater. Eng. Perform., 2015, 24, 839–847. doi: 10.1007/s11665-014-1325-9
16.
DanaeeI., ZamanizadehH. R., FallahiM. and LotfiB.: ‘The effect of surface pre-treatments on corrosion behavior of cerium-based conversion coatings on Al 7075-T6’, Mater. Corros., 2014, 65, 815–819. doi: 10.1002/maco.201307147
17.
RahimiH., MozafariniaR., RazaviR. S. H., PaimozdE. and Hojjati NajafabadiA.: ‘Processing and properties of GPTMS-TEOS hybrid coatings on 5083 aluminum alloy’, Adv. Mater. Res., 2011, 239–242, 736–742. doi: 10.4028/www.scientific.net/AMR.239-242.736
18.
ZheludkevichM. L., SalvadoI. M. and FerreiraM. G. S.: ‘Sol–gel coatings for corrosion protection of metals’, J. Mater. Chem., 2005, 15, 5099–5111. doi: 10.1039/b419153f
19.
MinJ., ParkJ. H., SohnH. K. and ParkJ. M.: ‘Synergistic effect of potassium metal siliconate on silicate conversion coating for corrosion protection of galvanized steel’, J. Ind. Eng. Chem., 2012, 18, 655–660. doi: 10.1016/j.jiec.2011.11.057
20.
KazemiM., DanaeeI. and ZaareiD.: ‘The effect of pre-anodizing on corrosion behavior of silicate conversion coating on AA2024’, Mater. Chem. Phys., 2014, 148, 223–229. doi: 10.1016/j.matchemphys.2014.07.038
21.
HamdyA. S. and ButtD. P.: ‘Environmentally compliant silica conversion coatings prepared by sol–gel method for aluminum alloys’, Surf. Coat. Technol., 2006, 201, 401–407. doi: 10.1016/j.surfcoat.2005.11.142
22.
YuanM. R., LuJ. T., KongG. and CheC. S.: ‘Effect of silicate anion distribution in sodium silicate solution on silicate conversion coatings of hot-dip galvanized steels’, Surf. Coat. Technol., 2011, 205, 4466–4470. doi: 10.1016/j.surfcoat.2011.03.064
23.
YuanM. R., LuJ. T., KongG. and CheC. S.: ‘Self-healing ability of silicate conversion coatings on hot dip galvanized steels’, Surf. Coat. Technol., 2011, 205, 4507–4513. doi: 10.1016/j.surfcoat.2011.03.088
24.
U.S. Bureau of Mines: ‘Crystalline silica primer’, branch of industrial minerals; 1992, Washington, DC, Special Publication.
25.
ZhuravlevL. T.: ‘The surface chemistry of amorphous silica. Zhuravlev model’, Colloid Surf., 2000, 173, 1–38. doi: 10.1016/S0927-7757(00)00556-2
26.
WangD. and BierwagenG. P.: ‘Sol–gel coatings on metals for corrosion protection’, Prog. Org. Coat., 2009, 64, 327–338. doi: 10.1016/j.porgcoat.2008.08.010
27.
PalanivelV., ZhuD. and van OoijW. J.: ‘Nanoparticle-filled silane films as chromate replacements for aluminum alloys’, Prog. Org. Coat., 2003, 47, 384–392. doi: 10.1016/j.porgcoat.2003.08.015
28.
DarmianiE., DanaeeI., GolozarM. A., ToroghinejadM. R., AshrafiA. and AhmadiA.: ‘Reciprocating wear resistance of Al–SiC nano-composite fabricated by accumulative roll bonding process’, Mater. Des., 2013, 50, 497–502. doi: 10.1016/j.matdes.2013.03.047
29.
YuanM., LuJ. and KongG.: ‘Effect of SiO2:Na2O molar ratio of sodium silicate on the corrosion resistance of silicate conversion coatings’, Surf. Coat. Technol., 2010, 204, 1229–1235. doi: 10.1016/j.surfcoat.2009.10.024
30.
MoradshahiM., TavakoliT., AmiriS. and ShayeganmehrS.: ‘Plasma nitriding of Al alloys by DC glow discharge’, Surf. Coat. Technol., 2006, 201, 567–574. doi: 10.1016/j.surfcoat.2005.12.002
31.
SinghD., KumarR., KumarA. and RaiK. N.: ‘Synthesis and characterization of rice husk silica, silica–carbon composite and H3PO4 activated silica’, Cerâmica., 2008, 54, 203–212.
32.
RokitaM., MozgawaW. and AdamczykA.: ‘Transformation of silicate gels during heat treatment in air and in argon – spectroscopic studies’, J. Mol. Struct., 2014, 1070, 125–130.
33.
TrevinoM., Mercado-SolisR. D., ColasR., PerezA., TalamantesJ. and VelascoA.: ‘Erosive wear of plasma electrolytic oxidation layers on aluminium alloy 6061’, Wear, 2013, 301, 434–441. doi: 10.1016/j.wear.2012.12.011
34.
HeX. and ShiX.: ‘Self-repairing coating for corrosion protection of aluminum alloys’, Prog. Org. Coat., 2009, 65, 37–43. doi: 10.1016/j.porgcoat.2008.09.003
