Ultra-low carbon steels possess an attractive combination of mechanical properties namely drawability and strength that is suitable for automotive applications. A high-strength variant of the material containing large amounts of manganese and phosphorous has been produced in the laboratory. The main objective of the present work was to study the microstructural evolution after recrystallisation, below and above the critical phase transformation temperatures of the steel. Crystallographic texture of ferrite was found to intensify with increasing the annealing temperature; surprisingly even beyond the upper transformation temperature. The texture measurement data obtained with the electron backscatter diffraction and X-ray diffraction matched very well with each other. The steel recorded an impressive strength–drawability balance mainly due to solid solution strengthening and favourable γ-fibre texture.
HutchinsonW. B.: ‘Development and control of annealing texture in low carbon steels’, Int. Mater. Rev., 1984, 29, (1), 25–42.
2.
SamajdarI., VerlindenB., Van HoutteP. and VanderschuerenD.: ‘γ-Fibre recrystallization texture in IF steel: an investigation on the recrystallization mechanisms’, Mater. Sci. Eng. A, 1997, 238, (2), 343–350. doi: 10.1016/S0921-5093(97)00455-3
3.
De CoomanB. C. and De VytA.: ‘International forum for the properties and application of IF steels – IF STEELS 2003’, Tokyo, 2003, 249.
4.
HuaM., GarciaC. I. and De ArdoA. J.: ‘Multi-phase precipitates in interstitial-free steels’, Scr. Metall. Mater., 1993, 28, 973–978. doi: 10.1016/0956-716X(93)90065-Z
5.
DeA. K., VandeputteS. and De CoomanB. C.: ‘Kinetics of low temperature precipitation in a ULC bake hardening steel’, Scr. Mater., 2001, 44, (4), 695–700. doi: 10.1016/S1359-6462(00)00638-2
6.
HanS. and LeeO.: ‘Effect of manufacturing conditions on mechanical properties of super formable IF high strength steels’, Steel Res. Int., 2004, 75, 178–181.
7.
HuchinsonW. B.: ‘Recrystallisation textures in iron resulting from nucleation at grain boundaries’, Acta Metall., 1989, 37, 1047–1056. doi: 10.1016/0001-6160(89)90101-6
8.
TsujiN., ItoY., SaitoY. and MinaminoY.: ‘Strength and ductility of ultrafine grained aluminium and iron produced by ARB and annealing’, Scr. Mater., 2002, 47, (12), 893–899. doi: 10.1016/S1359-6462(02)00282-8
9.
RamosA. S., SandimH. R. Z. and HashimotoT. M.: ‘FeNbP in ultralow carbon Nb-added steel containing high P’, Mater. Charact., 2000, 45, (3), 171–174. doi: 10.1016/S1044-5803(00)00070-X
10.
GhoshP., RayR. K., BhattacharyaB. and BhargavaS.: ‘Precipitation and texture formation in two cold rolled and batch annealed interstitial-free high strength steels’, Scr. Mater., 2006, 55, 271–274. doi: 10.1016/j.scriptamat.2006.03.043
11.
GhoshP., BhattacharyaB. and RayR. K.: ‘Comparative study of precipitation behaviour and texture formation in cold rolled-batch annealed and cold rolled- continuous annealed interstitial free high strength steels’, Scr. Mater., 2007, 56, 657–660. doi: 10.1016/j.scriptamat.2006.12.044
12.
HoileS.: ‘Processing and properties of mild interstitial free steels’, Mater. Sci. Technol., 2000, 16, 1079–1093. doi: 10.1179/026708300101506902
13.
PetrovR. H., HajyakbaryF., SidorJ., SantofimiaM., SietsmaJ. and KestensL.: ‘Texture formation in high strength low alloy steel reheated with ultrafast heating rates’, Mater. Sci. Forum, 2012, 702–703, 798–801. doi: 10.4028/www.scientific.net/MSF.702-703.798
14.
ChenY.-L., SuL., ZhaoA.-M., KuaiZ., LiB.-H. and LiuG.-M.: ‘Effects of rolling parameters on texture and formability of high strength ultra-low carbon BH steel’, J. Iron Steel Res. Intern, 2013, 20, (6), 75–81. doi: 10.1016/S1006-706X(13)60115-6
YanQ., ShiW., HuangJ., WangH. and LiL.: ‘Effect of annealing temperature on texture and solid solution elements in ultra-low carbon bake-hardening steels’, Cailiao Rechuli Xuebao/Trans. Mater. Heat Treat., 2011, 32, (Suppl.), 71–74.
17.
Thermo-Calc software, version R: ‘Foundation of computational thermodynamics’, 1993–2006, Stockholm, Sweden.
18.
ForouraghiK.: ‘Ultrasonic measurement of drawability (r-values) of low carbon steel sheets’, PhD thesis, Retrospective theses and dissertations, Paper 10903, 1995, 19.
19.
SamajdarI., VerlindenB., Van HoutteP. and VanderschuerenD.: ‘Recrystallisation kinetics in IF-steel: A study on the sluggish recrystallization behaviour’, Scr. Mater., 1997, 37, 869–874. doi: 10.1016/S1359-6462(97)00185-1
20.
BungeH. J.: ‘Texture analysis in Material Science’; 1982, London, Butterworths.
21.
RayR. K., JonasJ. J., Buttron-GuilenM. P. and SavoieJ.: ‘Transformation textures in steels’, ISIJ Int., 1994, 34, (12), 927–942. doi: 10.2355/isijinternational.34.927
22.
RayR. K., JonasJ. J. and HookR. E.: ‘Cold rolling and annealing textures in low carbon and extra low carbon steels’, Int. Mater. Rev., 1994, 39, (4), 129–172. doi: 10.1179/imr.1994.39.4.129
23.
PetrovR., KestensL. and HoubaertY.: ‘Recrystallization of a cold rolled TRIP-assisted steel during reheating for intercritical annealing’, ISIJ Int., 2001, 41, 883–890. doi: 10.2355/isijinternational.41.883
24.
MassardierV., NgansopA., FabregueD., CazottesS. and MerlinJ.: ‘Ultra-Rapid intercriticalannealing to improve deep drawability of low-carbon, al-killed steels’, Metall. Mater. Trans. A, 2012, 43A, (7), 2225–2236. doi: 10.1007/s11661-012-1096-6
25.
DieterG. E.: ‘Mechanical metallurgy’, 468; 1961, London, McGraw Hill Book Company.
26.
Van HoutteP.: ‘The MTM-FHM software system’, Version 2, Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Belgium.
27.
YoshinagaN., InoueH., KawasakiK., KestensL. and De CoomanB. C.: ‘Factors affecting texture memory appearing through α-γ-α transformation in IF steels’, Mater. Trans., 2007, 48, (8), 2036–2042. doi: 10.2320/matertrans.MA200704
