Both the addition of 0.6% Sc and simultaneous addition of 0.2% Sc and 0.1% Zr exerted a remarkable effect on grain refinement of as-cast Al–Mg alloys, changing typical dendritic microstructure into fine equiaxed grains. Such effect was found to be related to the formation of primary particles, which acted as heterogeneous nucleation sites for α-Al matrix during solidification. Primary particles formed in Al–Mg–Sc–Zr alloy could be identified as the eutectic structure consisting of multilayer of ‘Al3(Sc,Zr) + α-Al + Al3(Sc,Zr)’, with a ‘cellular-dendritic’ mode of growth. In addition, an attractive comprehensive property of as-cast Al–5Mg alloy due to the addition of 0.2% Sc and 0.1% Zr was obtained.
BehmandS., MirsalehiS., OmidvarH. and SafarkhanianM.: ‘Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses’, Mater. Sci. Technol., 2016, 32, 438–445.
2.
LiM., PanQ., ShiY. and WangY.: ‘Microstructure dependent fatigue crack growth in Al-Mg-Sc alloy’, Mater. Sci. Eng. A, 2014, 611, 142–151. doi: 10.1016/j.msea.2014.05.087
3.
AnaA., MiljanaP., TamaraR., MiloradZ. and EndreR.: ‘Influence of annealing temperature on the baking response and corrosion properties of an Al-4.6wt%Mg alloy with 0.54wt%Cu’, J. Alloys. Compds., 2015, 625, 76–84. doi: 10.1016/j.jallcom.2014.11.063
4.
LathabaiS. and LloydP.: ‘The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy’, Acta Mater., 2002, 50, 4275–4292. doi: 10.1016/S1359-6454(02)00259-8
5.
WenS., XingZ., HuangH., LiB., WangW. and NieZ.: ‘The effect of erbium on the microstructure and mechanical properties of Al-Mg-Mn-Zr alloy’, Mater. Sci. Eng. A, 2009, 516, 42–49. doi: 10.1016/j.msea.2009.02.045
6.
CostaS., PugaH., BarbosaJ. and PintoA.: ‘The effect of Sc additions on the microstructure and age hardening behaviour of as cast Al-Sc alloys’, Mater. Des., 2012, 42, 347–352. doi: 10.1016/j.matdes.2012.06.019
7.
FilatovY., YelaginV. and ZakharovV.: ‘New Al-Mg-Sc alloys’, Mater. Sci. Eng. A, 2000, 280, 97–101. doi: 10.1016/S0921-5093(99)00673-5
8.
TaoY., ZhangZ., NiD., WangD., XiaoB. and MaZ.: ‘Influence of welding parameter on mechanical properties and fracture behavior of friction stir welded Al-Mg-Sc joints’, Mater. Sci. Eng. A, 2014, 612, 236–245. doi: 10.1016/j.msea.2014.06.051
9.
ZhouS., ZhangZ., LiM., PanD., SuH., DuX., LiP. and WuY.: ‘Formation of the eutecticum with multilayer structure during solidification in as-cast Al-Mg alloy containing a high level of Sc’, Mater. Lett., 2016, 164, 19–22. doi: 10.1016/j.matlet.2015.10.072
10.
AppsP., BertaM. and PrangnellP.: ‘The effect of dispersoids on the grain refinement mechanisms during deformation of aluminium alloys to ultra-high strains’, Acta Mater., 2005, 53, 499–511. doi: 10.1016/j.actamat.2004.09.042
11.
JonesM. and HumphreysF.: ‘Interaction of recrystallization and precipitation: The effect of Al3Sc on the recrystallization behaviour of deformed aluminium’, Acta Mater., 2003, 51, 2149–2159. doi: 10.1016/S1359-6454(03)00002-8
12.
NovotnyG. and ArdellA.: ‘Precipitation of Al3Sc in binary Al-Sc alloys’, Mater. Sci. Eng. A, 2001, 318, 144–154. doi: 10.1016/S0921-5093(01)01326-0
13.
ZhangW., YeY., HeL., LiP., FengX. and NovikovL.: ‘Dynamic response and microstructure control of Al-Sc binary alloy under high-speed impact’, Mater. Sci. Eng. A, 2013, 578, 35–45. doi: 10.1016/j.msea.2013.04.067
14.
DavydovV., RostovaT., ZakharovV., FilatovY. and YelaginV. I.: ‘Scientific principles of making an alloying addition of scandium to aluminium alloys’, Mater. Sci. Eng. A, 2000, 280, 30–36. doi: 10.1016/S0921-5093(99)00652-8
15.
KaiserM., DattaS., RoychowdhuryA. and BanerjeeM.: ‘Effect of scandium on the microstructure and ageing behaviour of cast Al-6Mg alloy’, Mater. Charact., 2008, 59, 1661–1666. doi: 10.1016/j.matchar.2008.03.006
16.
FullerC., MurrayJ. and SeidmanD.: ‘Temporal evolution of the nanostructure of Al(Sc,Zr) alloys part I – chemical compositions of Al3(Sc1-xZrx) precipitates’, Acta Mater., 2005, 53, 5401–5413. doi: 10.1016/j.actamat.2005.08.016
17.
FullerC. and SeidmanD.: ‘Temporal evolution of the nanostructure of Al(Sc,Zr) alloys part II – coarsening of Al3(Sc1-xZrx) precipitates’, Acta Mater., 2005, 53, 5415–5428. doi: 10.1016/j.actamat.2005.08.015
18.
FullerC., SeidmanD. and DunandD.: ‘Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures’, Acta Mater., 2003, 51, 4803–4814. doi: 10.1016/S1359-6454(03)00320-3
19.
HaradaY. and DunandD.: ‘Microstructure of Al3Sc with ternary transition-metal additions’, Mater. Sci. Eng. A, 2002, 329–331, 686–695. doi: 10.1016/S0921-5093(01)01608-2
20.
LiG., ZhaoN., LiuT., LiJ., HeC., ShiC., LiuE. and ShaJ.: ‘Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al-Zn-Mg-Sc-Zr alloys’, Mater. Sci. Eng. A, 2014, 617, 219–227. doi: 10.1016/j.msea.2014.08.041
21.
SohiM., PooleW., SinclairC. and GallerneaultM.: ‘Yield strength of twin-belt cast Al-Mg-Sc-Zr alloy after annealing’, Mater. Sci. Technol., 2015, 31, 460–467. doi: 10.1179/1743284714Y.0000000629
22.
YinZ., PanQ., ZhangY. and JiangF.: ‘Effect of minor Sc and Zr on the microstructure and mechanical properties of Al-Mg based alloys’, Mater. Sci. Eng. A, 2000, 280, 151–155. doi: 10.1016/S0921-5093(99)00682-6
23.
NormanA., PrangnellP. and McEwenR.: ‘The solidification behaviour of dilute aluminium-scandium alloys’, Acta Mater., 1998, 46, 5715–5732. doi: 10.1016/S1359-6454(98)00257-2
24.
HydeK., NormanA. and PrangnellP.: ‘The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al-Sc alloys’, Acta Mater., 2001, 49, 1327–1337. doi: 10.1016/S1359-6454(01)00050-7
25.
ZhouS., ZhangZ., LiM., PanD., SuH., DuX., LiP. and WuY.: ‘Effect of Sc on microstructure and mechanical properties of as-cast Al-Mg alloys’, Mater. Des., 2016, 90, 1077–1084.
26.
ZhouS., ZhangZ., LiM., PanD., SuH., DuX., LiP. and WuY.: ‘Correlative characterization of primary particles formed in as-cast Al-Mg alloy containing a high level of Sc’, Mater. Charact., 2016, 118, 85–91. doi: 10.1016/j.matchar.2016.05.011
27.
XuC., DuR., WangX., HanadaS., YamagataH., WangW. and MaC.: ‘Effect of cooling rate on morphology of primary particles in Al-Sc-Zr master alloy’, Trans. Nonferrous Met. Soc. China, 2014, 24, 2420–2426. doi: 10.1016/S1003-6326(14)63366-5
28.
LiJ., WiessnerM., AlbuM., WursterS., SartoryB., HoferF. and SchumacherP.: ‘Correlative characterization of primary Al3(Sc,Zr) phase in an Al-Zn-Mg based alloy’, Mater. Charact., 2015, 102, 62–70. doi: 10.1016/j.matchar.2015.01.018
29.
DangJ., HuangY. and ChengJ.: ‘Effect of Sc and Zr on the microstructures and mechanical properties of as-cast Al-Mg-Si-Mn alloys’, Trans. Nonferrous Met. Soc. China, 2009, 19, 540–544. doi: 10.1016/S1003-6326(08)60309-X
30.
SongM. and HeY.: ‘Investigation of primary Al3(Sc,Zr) particles in Al-Sc-Zr alloys’, Mater. Sci. Technol., 2011, 27, 431–433. doi: 10.1179/174328409X443236
31.
LiJ., OberdorferB. and WursterS.: ‘Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys’, J. Mater. Sci., 2014, 49, 5961–5977. doi: 10.1007/s10853-014-8315-z
32.
QuestedT. and GreerA.: ‘The effect of the size distribution of inoculant particles on as-cast grain size in aluminium alloys’, Acta Mater., 2004, 52, 3859–3868. doi: 10.1016/j.actamat.2004.04.035
33.
QuestedT., DinsdaleA. and GreerA.: ‘Thermodynamic modelling of growth-restriction effects in aluminium alloys’, Acta Mater., 2005, 53, 1323–1334. doi: 10.1016/j.actamat.2004.11.024
