Solution-treated stainless steel was plasma-nitrocarburised at the precipitation-sensitive temperature with and without rare earth (RE) addition. The nitrocarburised layers were characterised by means of X-ray diffraction, transmission electron microscope, nanoindentation and anodic polarisation test. Experimental results show that the depth of plasma-nitrocarburised layer can be apparently increased from 60 to 75 μm after RE addition. More importantly, microstructure of stainless steel surface is refined into nano-sized grains after plasma nitrocarburising. At the depth of 20 μm, the hardness and the modulus of the nanocrystallised layer are as high as 13.6 and 218 GPa. After RE addition, the hardness and the modulus of the nanocrystallised layer increase to 17.5 and 255 GPa, respectively.
AzcoıtiaC, KarimiA. Magnetomechanical damping in Fe–Cr alloys and effect of Al and Mo addition. J Alloys Compd.2000;310:160–164. doi: 10.1016/S0925-8388(00)00938-5
2.
AlvesCJr, RodriguesJA, MartinelliAE. Growth of nitrided layers on Fe–Cr alloys. Mater Sci Eng A. 2000;279:10–15. doi: 10.1016/S0921-5093(99)00692-9
3.
MiyamotoG, YonemotoA, TanakaY, Microstructure in a plasma-nitrided Fe-18 mass% Cr alloy. Acta Mater.2006;54:4771–4779. doi: 10.1016/j.actamat.2006.06.006
4.
WangXA, YanMF, ZhangCS, Insights into plasma nitriding behaviour of M50NiL steel with different initial microstructures. Mater Sci Technol.2014;30:1248–1253. doi: 10.1179/1743284713Y.0000000465
5.
FuYQ, GuYW, BatchelorAW, Investigation of fracture toughness of deep carburised M50NiL steel under different tempering temperatures. Mater Sci Technol.1998;14:461–466. doi: 10.1179/mst.1998.14.5.461
6.
ChenWL, WuCL, LiuZR, Phase transformations in the nitrocarburizing surface of carbon steels revisited by microstructure and property characterizations. Acta Mater.2013;61:3963–3972. doi: 10.1016/j.actamat.2013.02.058
7.
MichlerT. Influence of plasma nitriding on hydrogen environment embrittlement of 1.4301 Austenitic Stainless Steel. Surf Coat Technol.2008;202:1688–1695. doi: 10.1016/j.surfcoat.2007.07.036
8.
LeylandA. Low temperature plasma diffusion treatment of stainless steels for improved wear resistance. Surf Coat Technol.1993;62:608–617. doi: 10.1016/0257-8972(93)90307-A
9.
ParascandolaS, MöllerW, WilliamsonDL. The nitrogen transport in austenitic stainless steel at moderate temperatures. Appl Phys Lett.2000;76:2194–2196. doi: 10.1063/1.126294
10.
LiW, LiXY, DongH. Effect of tensile stress on the formation of S-phase during low-temperature plasma carburizing of 316L foil. Acta Mater.2011;59:5765–5774. doi: 10.1016/j.actamat.2011.05.053
11.
HuangHW, WangZB, YongXP, Enhancing torsion fatigue behaviour of a martensitic stainless steel by generating gradient nanograined layer via surface mechanical grinding treatment. Mater Sci Technol.2013;29:1200–1205. doi: 10.1179/1743284712Y.0000000192
12.
DaiS, ZhuY, HuangZ. Microstructure and tensile behaviour of pure titanium produced after high-energy shot peening. Mater Sci Technol.2016;32:1323–1329. doi: 10.1080/02670836.2015.1121598
13.
RementeriaR, ArandaMM, Garcia-MateoC, Improving wear resistance of steels through nanocrystalline structures obtained by bainitic transformation. Mater Sci Technol.2016;32:308–312. doi: 10.1080/02670836.2015.1132048
14.
YanMF, LiuRL, WangYX. A method for realizing nanocrystallization of steel surface layer based on thermal diffusion technology. Chinese patent CN201110031571.8. 2011.
15.
LiuRL, YanMF, WuYQ, Microstructure and properties of 17-4PH steel plasma nitrocarburized with a carrier gas containing rare earth elements. Mater Charact.2010;61:19–24. doi: 10.1016/j.matchar.2009.09.017
16.
KlugHP, AlexanderLE. X-ray diffraction procedures for polycrystalline and amorphous materials. New York: Wiley; 1974; p. 661.
17.
YanMF, WangXA, LiuRL, Kinetics and wear behaviour of M50NiL steel plasma nitrided at low temperature. Mater Sci Technol.2016:1–7.
18.
SunY, BellT. Low temperature plasma nitriding characteristics of precipitation hardening stainless steel. Surf Eng.2003;19:331–336. doi: 10.1179/026708403225007545
19.
EsfandiariM, DongH. The corrosion and corrosion-wear behavior of plasma nitrided 17-4PH precipitation hardening stainless steel. Surf Coat Technol.2007;202:466–478. doi: 10.1016/j.surfcoat.2007.06.069
20.
DongH, EsfandiariM, LiXY. On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel. Surf Coat Technol.2008;202:2969–2975. doi: 10.1016/j.surfcoat.2007.10.036
21.
YangHJ, YangK, ZhangBC. Pitting corrosion resistance of La added 316L stainless steel in simulated body fluids. Mater Lett.2007;61:1154–1157. doi: 10.1016/j.matlet.2006.06.071
22.
ZhangT, LiDY. The effect of YCl3 and LaCl3 additives on wear of 1045 and 304 steels in a dilute chloride solution. Mater Sci Eng A.2003;345:179–189. doi: 10.1016/S0921-5093(02)00469-0
