The effects of Al additions (≤4 wt-%) on the microstructure and mechanical properties of Mg–4Y alloys were investigated. The microstructure of the as-cast Mg–4Y–1Al alloy consisted of an α-Mg matrix, together with Mg24Y5 and Al2Y phases. Al2Y formed preferentially when Al was added, replacing the Mg24Y5 phase by consuming Y solute. The eutectic reaction occurred, forming α-Mg and Mg24Y5 phases for Al contents below 2 wt-%; however, the pseudo-binary eutectic reaction occurred, forming α-Mg and Al2Y phases, for Al contents higher than 2 wt-%. The addition of Al improved mechanical properties. The Mg–4Y–4Al alloy exhibited the optimal ultimate tensile strength and yield strength, with values of 208 and 81 MPa, respectively.
This paper is part of a thematic issue on Light Alloys.
PanH, PanF, WangX, High conductivity and high strength Mg–Zn–Cu alloy. Mater Sci Technol. 2014;30:759–764. doi: 10.1179/1743284713Y.0000000400
2.
WangCL, DaiJC, LiuWC, Effect of Al additions on grain refinement and mechanical properties of Mg–Sm alloys. J Alloy Compd. 2015;620:172–179. doi: 10.1016/j.jallcom.2014.09.025
3.
GuoQ, YanHG, ChenZH, Elevated temperature compression behaviour of Mg–Al–Zn alloys. Mater Sci Technol. 2006;22:725–729. doi: 10.1179/174328406X100680
4.
WangC, LiuZ, XiaoS, Effects of Sn, Ca additions on thermal conductivity of Mg matrix alloys. Mater Sci Technol. 2016;32:581–587.
5.
ArrabalR, MingoB, PardoA, Role of alloyed Nd in the microstructure and atmospheric corrosion of as-cast magnesium alloy AZ91. Corros Sci. 2015;97:38–48. doi: 10.1016/j.corsci.2015.04.004
6.
MertF, ÖzdemirA, KainerKU, Influence of Ce addition on microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy. Trans Nonferrous Metal Soc China. 2013;23:66–72. doi: 10.1016/S1003-6326(13)62430-9
7.
WuJ, ChiuYL, JonesIP.Effect of Gd on the microstructure of as-cast Mg–4.2Zn–0.8Y (at.%) alloys. J Alloy Compd. 2016;661:455–460. doi: 10.1016/j.jallcom.2015.11.209
8.
QiuD, ZhangMX.Effect of active heterogeneous nucleation particles on the grain refining efficiency in an Mg–10wt.% Y cast alloy. J Alloys Compd. 2009;488:260–264. doi: 10.1016/j.jallcom.2009.08.100
9.
HuG, XingB, HuangF, Effect of Y addition on the microstructures and mechanical properties of as-aged Mg–6Zn–1Mn–4Sn (wt%) alloy. J Alloys Compd. 2016;689:326–332. doi: 10.1016/j.jallcom.2016.06.216
10.
ZouH, ZengX, ZhaiC, The effects of yttrium element on microstructure and mechanical properties of Mg–5wt.% Zn–2wt.% Al alloy. Mater Sci Eng A. 2005;402:142–148. doi: 10.1016/j.msea.2005.04.011
11.
Socjusz-PodosekM, LityńskaL.Effect of yttrium on structure and mechanical properties of Mg alloys. Mater Chem Phys. 2003;80:472–475. doi: 10.1016/S0254-0584(02)00549-7
12.
NingZL, YiJY, QianM, Microstructure and elevated temperature mechanical and creep properties of Mg–4Y–3Nd–0.5Zr alloy in the product form of a large structural casting. Mater Design. 2014;60:218–225. doi: 10.1016/j.matdes.2014.03.062
13.
YangZ, LiJP, ZhangJX, Review on research and development of magnesium alloys. Acta Metall Sin (Engl Lett). 2008;21(5):313–328. doi: 10.1016/S1006-7191(08)60054-X
14.
SmolaB, JoskaL, BřezinaV, Microstructure, corrosion resistance and cytocompatibility of Mg–5Y–4Rare Earth–0.5Zr (WE54) alloy. Mater Sci Eng C. 2012;32:659–664. doi: 10.1016/j.msec.2012.01.003
15.
YangMB, PanFS, ZhuY, Effects of small additions of Zr and Sr on as cast microstructure and tensile properties of Mg–4Y–1.2Mn–0.9Sc (wt-%) alloy. Mater Sci Technol. 2012;28(2):144–150. doi: 10.1179/1743284710Y.0000000046
16.
XiaoW, EastonMA, DarguschMS, The influence of Zn additions on the microstructure and creep resistance of high pressure die cast magnesium alloy AE44. Mater Sci Eng A. 2012;539:177–184. doi: 10.1016/j.msea.2012.01.077
17.
MaQ, HildebrandZ, StjohnDH.The loss of dissolved Zirconium in Zirconium-refined magnesium alloys after remelting. Metall Mater Trans A. 2009;40A:2470–2479.
18.
QiuD, ZhangM.The nucleation crystallography and wettability of Mg grains on active Al2Y inoculants in an Mg–10wt% Y alloy. J Alloys Compd. 2014;586:39–44. doi: 10.1016/j.jallcom.2013.10.042
19.
DaiJC, ZhuSM, EastonMA, Heat treatment, microstructure and mechanical properties of a Mg–Gd–Y alloy grain-refined by Al additions. Mater Sci Eng A. 2013;576:298–305. doi: 10.1016/j.msea.2013.04.016
20.
CuiCL, WuLB, WuRZ, Influence of yttrium on microstructure and mechanical properties of as-cast Mg–5Li–3Al–2Zn alloy. J Alloys Compd. 2011;509:9045–9049. doi: 10.1016/j.jallcom.2011.04.030
21.
ZhangJH, LiuSJ, LengZ, Structure stability and mechanical properties of high-pressure die-cast Mg–Al–Ce–Y-based alloy. Trans Nonferrous Metal Soc China. 2012;22:262–267. doi: 10.1016/S1003-6326(11)61169-2
22.
ZhaoJ, ZhangJ, LiuWC, Effect of Y content on microstructure and mechanical properties of as-cast Mg–8Li–3Al–2Zn alloy with duplex structure. Mater Sci Eng A. 2016;650:240–247. doi: 10.1016/j.msea.2015.10.067
23.
DasSK, KangYB, HaTK, Thermodynamic modeling and diffusion kinetic experiments of binary Mg–Gd and Mg–Y systems. Acta Mater. 2014;71:164–175. doi: 10.1016/j.actamat.2014.02.029
24.
YangXM, HouH, ZhaoYH, First principles investigation of Mg17Al12, Al2Y and Al2Ca on elastic properties and phase stability. Rare Metal Mater Eng. 2014;43:875–880(in Chinese).
25.
FabrichnayaaOB, LukasaHL, EffenbergbG, Thermodynamic optimization in the Mg–Y system. Intermetallics. 2003;11:1183–1188. doi: 10.1016/S0966-9795(03)00156-0
26.
FangCF, LiuGX, HaoH, Effect of Al addition on microstructure, texture and mechanical properties of Mg–5Gd–2.5Y–2Zn alloy. J Alloys Compd. 2016;686:347–355. doi: 10.1016/j.jallcom.2016.06.031
27.
MaoPL, WangF, LiuZ.Thermodynamics and phase diagram of magnesium alloys. 1st ed. Beijing: China Machine Press; 2015. p. 154–155(in Chinese).
28.
LiP, WangY.Effect of Y additions on grain refinement of AZ81 magnesium alloy. Chinese Rare Earths. 2015;36:85–88(in Chinese).
29.
EastonMA, StJohnDH.A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles. Acta Mater. 2001;49:1867–1878. doi: 10.1016/S1359-6454(00)00368-2
30.
QiuD, ZhangMX, TaylorJA, A new approach to designing a grain refiner for Mg casting alloys and its use in Mg–Y-based alloys. Acta Mater. 2009;57:3052–3059. doi: 10.1016/j.actamat.2009.03.011
31.
Al ShakhshirS, MedrajM.Computational thermodynamic model for the Mg–Al–Y system. J Phase Equilib Diff. 2006;27:231–244. doi: 10.1361/154770306X109782
32.
ChangHW, QiuD, TaylorJA, The role of Al2Y in grain refinement in Mg–Al–Y alloy system. J Magn Alloy. 2013;1:115–121. doi: 10.1016/j.jma.2013.07.006
33.
WuBL, ZhaoYH, DuXH, Ductility enhancement of extruded magnesium via yttrium addition. Mater Sci Eng A. 2010;527:4334–4340. doi: 10.1016/j.msea.2010.03.054
34.
ChenZH.Heat resistant magnesium alloy. 1st ed. Beijing: Chemical Industry Press; 2007. p. 173–181(in Chinese).
35.
CorderoZC, KnightBE, SchuhCA.Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals. Int Mater Rev. 2016;61:495–512. doi: 10.1080/09506608.2016.1191808
