Improvement of toughness of high chromium white cast iron: Duplex ferritic-austenitic matrix

Abstract

It is attempted to enhance the impact toughness of industrially used high chromium white cast iron (WCI) without sacrificing wear resistance. The microstructure is engineered by cyclic annealing to obtain features such as duplex grain matrix, where austenite envelops ferrite grain, refined M₇C₃ carbide. The newly cast and heat-treated alloy shows remarkable impact toughness i.e. 13J with improved wear resistance. The fracture micro-mechanism is studied through extensive scanning electron microscopy and it is ascertained that enhanced impact toughness results from crack arrest at duplex grain boundaries. A few other toughness enhancing features are also discussed. The results are compared with standard ASTM grade Class-III high chromium WCI and are found to be encouraging.

Keywords

White cast iron duplex grain impact toughness fracture wear

Get full access to this article

View all access options for this article.

References

Pariente

, Belzunce

, Riba

CRYJ.

Mechanical strength and fracture toughness of high chromium white cast iron. Mater Sci Technol. 2008;24:981–985. doi: 10.1179/174328407X213161

Buytoz

Microstructural properties of M₇C₃ eutectic carbides in a Fe-Cr-C alloy. Mater Lett. 2006;60:605–608. doi: 10.1016/j.matlet.2005.09.046

Zhang

, Kelly

, Gates

JD.

The effect of heat treatment on the toughness, hardness and microstructure of low carbon white cast iron. J Mater Sci. 2001;36:3865–3875. doi: 10.1023/A:1017949600733

Sare

IR.

Abrasion resistance and fracture toughness of white cast iron. Met Technol. 1979;6:412–419. doi: 10.1179/030716979803276228

Kootsookos

, Gates

, Eaton

RA.

Development of a white cast iron of fracture toughness 40 MPa √m. Cast Met. 1995;7:239–246. doi: 10.1080/09534962.1995.11819184

Radulovic

, Fiset

, Peev

, The influence of vanadium on fracture toughness and abrasion resistance in high chromium white cast irons. J Mater Sci. 1994;29:5085–5094. doi: 10.1007/BF01151101

Sare

, Arnold

BK.

The influence of heat treatment on high-stress abrasion resistance and fracture toughness of alloy white cast irons. Metall Mater Trans A. 1995;26:1785–1793. doi: 10.1007/BF02670766

Dun

, Liu

, Effect of multicomponent modifier on microstructure and mechanical properties of high Ni-Cr-Mo cast iron. Mater Sci Technol. 2011;27:1840–1845. doi: 10.1179/1743284711Y.0000000070

Davis JR.

Classification and basic metallurgy of cast irons. In: Davis JR , editor. Materials Park, OH: ASM specialty handbook cast irons. ASM International; 1996. p. 3–12.

10.

Wiengmoon

Carbides in high chromium cast irons. Naresuan Univ Eng J. 2011;6:64–71.

11.

Qiao

, Kong

An energy analysis of the grain boundary behavior in cleavage cracking in Fe-3wt.% Si alloy. Mater Lett. 2004;58:3156–3160. doi: 10.1016/j.matlet.2004.05.063

12.

, Chen

, Chakravarthula

, Resistance to cleavage cracking and subsequent shearing of high-angle grain boundary. Eng Fract Mech. 2010;77:768–775. doi: 10.1016/j.engfracmech.2009.12.009

13.

Argon

, Qiao

Cleavage cracking resistance of large angle grain boundaries in Fe-3 wt% Si alloy. Philos Mag A. 2002;82:3333–3347.

14.

, Chen

, Chakravarthula

, Nonuniform cleavage cracking across persistent grain boundary. Mech Mater. 2011;43:567–573. doi: 10.1016/j.mechmat.2011.07.001