Ti–4Al–2Fe alloy and Ti–4Al–2Fe/TiB nano-composite were processed by a novel spark plasma sintering route. KBF4 was used as an alternative and inexpensive boron precursor to form TiB reinforcement in situ during sintering. Fe was used as an alternative to vanadium to make the (α + β) Ti matrix. The processed Ti–4Al–2Fe alloy exhibited excellent mechanical properties (CS = 1798 MPa). The TiB whiskers were distributed homogeneously and were fine (widths 130 nm and lengths from 100 nm to 3 µm). No residual TiB2 was found in the composite, in contrast with other methods. The TiB homogenised and refined the microstructure, while the hardness (710 HV), compressive strength (2414 MPa) and elastic modulus (140 GPa) all increased significantly when compared to the unreinforced alloy.
LeyensC, PetersM.Titanium and titanium alloys: fundamentals and applications. Weinheim: Wiley-Vch Verlag GmbH & Co. KGaA; 2003.
2.
SaitoT, TakamiyaH, FurutaT.Thermo mechanical properties of P/M β titanium metal matrix composite. Mater Sci Eng A. 1998;243(1-2):273–278. doi: 10.1016/S0921-5093(97)00813-7
3.
PandaKB, RavichandranKS.Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: the nature of TiB formation and composite properties. Metall Mater Trans A. 2003;34(6):1371–1385. doi: 10.1007/s11661-003-0249-z
MorsiK, PatelVV.Processing and properties of titanium–titanium boride (TiBw) matrix composites – a review. J Mater Sci. 2007;42(6):2037–2047. doi: 10.1007/s10853-006-0776-2
6.
GorsseS, ChaminadeJP, LePY.In situ preparation of titanium base composites reinforced by TiB single crystals using a powder metallurgy technique. Compos Part A App Sci Manuf. 1998;29(9-10):1229–1234. doi: 10.1016/S1359-835X(98)00080-3
7.
RoySK, BiswasA, BanerjeeS.Self-propagating high-temperature synthesis of titanium borides. Bull Mater Sci. 1993;16(5):347–356. doi: 10.1007/BF02759547
8.
RanganathS, MishraRS.Steady state creep behaviour of particulate-reinforced titanium matrix composites. Acta Mater. 1996;44(3):927–935. doi: 10.1016/1359-6454(95)00242-1
9.
YamamotoT, OtsukiA, IshiharaK, Synthesis of near net shape high density TiB/Ti composite. Mater Sci Eng A. 1997;239–240:647–651. doi: 10.1016/S0921-5093(97)00643-6
10.
FanZ, MiodownikAP, ChandrasekaranL, The Young's moduli of in situ Ti/TiB composites obtained by rapid solidification processing. J Mater Sci. 1994;29(4):1127–1134. doi: 10.1007/BF00351442
11.
GengK, LuW, QinY, In situ preparation of titanium matrix composites reinforced with TiB whiskers and Y2O3 particles. Mater Res Bull. 2004;39(6):873–879. doi: 10.1016/j.materresbull.2003.11.008
12.
GodfreyTMT, WisbeyA, GoodwinPS, Microstructure and tensile properties of mechanically alloyed Ti–6A1–4V with boron additions. Mater Sci Eng A. 2000;282(1-2):240–250. doi: 10.1016/S0921-5093(99)00699-1
13.
LiDX, PingDH, LuYX, Characterization of the microstructure in TiB-whisker reinforced Ti alloy matrix composite. Mater Lett. 1993;16(6):322–326. doi: 10.1016/0167-577X(93)90201-8
14.
KobayashiM, FunamiK, SuzukiS, Manufacturing process and mechanical properties of fine TiB dispersed Ti–6Al–4V alloy composites obtained by reaction sintering. Mater Sci Eng A. 1998;243(1-2):279–284. doi: 10.1016/S0921-5093(97)00814-9
15.
ChandravanshiVK, SarkarR, GhosalP, Effect of minor additions of boron on microstructure and mechanical properties of as-cast near α titanium alloy. Metall Mater Trans A. 2010;41(4):936–946. doi: 10.1007/s11661-009-0155-0
16.
ZhangZ, ShenX, WangF, Microstructure characteristics and mechanical properties of TiB/Ti-1.5Fe-2.25Mo composites synthesized in situ using SPS process. Trans Nonferr Met Soc China. 2013;23:2598–2604. doi: 10.1016/S1003-6326(13)62773-9
17.
ErikssonM, SalamonD, NygrenM, Spark plasma sintering and deformation of Ti–TiB2 composites. Mater Sci Eng A. 2008;475(1-2):101–104. doi: 10.1016/j.msea.2007.01.161
18.
HiroshiI, ShuheiK, MichiharuO.Mechanical properties of TiB/Ti composites by spark plasma sintering. J Solid Mech Mater Eng. 2008;2(2):234–242. doi: 10.1299/jmmp.2.234
19.
CaoG, GengL, NakaM.Elastic properties of titanium monoboride measured by nanoindentation. J Am Cer Soc. 2006;89(12):3836–3838. doi: 10.1111/j.1551-2916.2006.01280.x
20.
LiBS, ShangJL, GuoJJ, Formation of TiBw reinforcement in in-situ titanium matrix composites. J Mater Sci. 2004;39(3):1131–1133. doi: 10.1023/B:JMSC.0000012962.11500.6d
21.
PraveenN, MurthyGVS.Determination of elastic modulus in nickel alloy from ultrasonic measurements. Bull Mater Sci. 2011;34(2):323–326. doi: 10.1007/s12034-011-0070-z
22.
ZhangZ, ShenXB, WenS, In situ reaction synthesis of Ti–TiB composites containing high volume fraction of TiB by spark plasma sintering process. J Alloy Compd. 2010;503:145–150. doi: 10.1016/j.jallcom.2010.04.218
23.
MaZY, TjongSC, GenL.In-situ Ti-TiB metal–matrix composite prepared by a reactive pressing process. Scripta Mater. 2000;42:367–373. doi: 10.1016/S1359-6462(99)00354-1
24.
CullityBD.Elements of X-ray diffraction. 2nd ed. MA (MA): Addison-Wesley Pub. Co; 1978.
25.
FujitaT, OgawaA, OuchiC, Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process. Mater Sci Eng A. 1996;213(1-2):148–153. doi: 10.1016/0921-5093(96)10232-X
26.
ChenBY, HwangKS.Sintered Ti–Fe alloys with in situ synthesized TiC dispersoids. Mater Sci Eng A. 2012;541:88–97. doi: 10.1016/j.msea.2012.02.007
27.
KooMY, ParkJS, ParkMK, Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti–6Al–4V composites. Scripta Mater. 2012;66(7):487–490. doi: 10.1016/j.scriptamat.2011.12.024
28.
FengH, ZhouY, JiaD, Stacking faults formation mechanism of in situ synthesized TiB whiskers. Scripta Mater. 2006;55(8):667–670. doi: 10.1016/j.scriptamat.2006.07.006
29.
WangF, MeiJ, WuX.Direct laser fabrication of Ti6Al4V/TiB. J Mater Process Technol. 2008;195:321–326. doi: 10.1016/j.jmatprotec.2007.05.024
30.
BolzoniL, Ruiz-NavasEM, NeubauerE, Inductive hot-pressing of titanium and titanium alloy powders. Mater Chem Phys. 2012;131:672–679. doi: 10.1016/j.matchemphys.2011.10.034
31.
YanZ, ChenF, CaiY, Microstructure and mechanical properties of in-situ synthesized TiB whiskers reinforced titanium matrix composites by high-velocity compaction. Powder Technol. 2014;267:309–314. doi: 10.1016/j.powtec.2014.07.048
32.
YuY, ZhangW, DongW, Research on heat treatment of TiBw/Ti6Al4V composites tubes. Mater Design. 2015;73:1–99. doi: 10.1016/j.matdes.2015.02.021
33.
SenI, TamirisakandalaS, MiracleDB, Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloy. Acta Mater. 2007;55:4983–4993. doi: 10.1016/j.actamat.2007.05.009
34.
JeongHW, KimSJ, HyunYT, Densification and compressive strength of in-situ processed Ti/TiB composites by powder metallurgy. Met Mater Int. 2002;8(1):25–35. doi: 10.1007/BF03027025
35.
MinL, Hai-pingY, Chung-FengL.Microstructure and mechanical properties of Ti6Al4V powder compacts prepared by magnetic pulse compaction. Trans Nonferr Soc China. 2010;20(4):553–558. doi: 10.1016/S1003-6326(09)60177-1
36.
LiuY, ChenLF, TangHP, Design of powder metallurgy titanium alloys and composites. Mater Sci Eng A. 2006;418(1-2):25–35. doi: 10.1016/j.msea.2005.10.057
37.
HuangLJ, XuHY, WangB, Effects of heat treatment parameters on the microstructure and mechanical properties of in situ TiBw/Ti6Al4V composite with a network architecture. Mater Design. 2012;36:694–698. doi: 10.1016/j.matdes.2011.12.021
