After a short-time surface mechanical attrition treatment process, a planar uneven structure was obtained on the surface of irons. The yield strength of the sample subjected to surface mechanical attrition treatment for 60 s is almost twice than that of the annealed sample, but the ductility is still well retained. The good combination of strength and ductility is mainly due to the extra strain hardening and the coexistence of soft and hard phases. The extra strain hardening delays the annihilation of dislocations and reduces the plastic instability, while the hard phase in the planar uneven structure suppresses the crack initiation, and the soft phase delays the crack propagation.
TaoZBWNR, TongWP, SuiML, An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment. Acta Mater. 2002;50:4603–4616. doi: 10.1016/S1359-6454(02)00310-5
2.
WangZB, TaoNR, TongWP, Diffusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment. Acta Mater. 2003;51(14):4319–4329. doi: 10.1016/S1359-6454(03)00260-X
3.
LiY, HouL, WeiY, Enhancement of siliconizing behaviors in pure iron induced by surface mechanical attrition treatment. Surf Coat Technol. 2017;309:462–470. doi: 10.1016/j.surfcoat.2016.12.017
AlMangourB, YangJ-M.Integration of heat treatment with shot peening of 17–4 stainless steel fabricated by direct metal laser sintering. JOM. 2017;69(11):2309–2313. doi: 10.1007/s11837-017-2538-9
6.
AlMangourB, YangJ-M.Improving the surface quality and mechanical properties by shot-peening of 17–4 stainless steel fabricated by additive manufacturing. Mater Des. 2016;110:914–924. doi: 10.1016/j.matdes.2016.08.037
7.
LinY, LuJ, WangL, Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel. Acta Mater. 2006;54(20):5599–5605. doi: 10.1016/j.actamat.2006.08.014
8.
Han JingSG, GuoxiongH.Research present on surface self-nanocrystallization of metallic materials. Mater Rev; 21:2–6.
9.
RolandT, RetraintD, LuK, Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scr Mater. 2006;54(11):1949–1954. doi: 10.1016/j.scriptamat.2006.01.049
10.
BahlS, ShreyasP, TrishulMA, Enhancing the mechanical and biological performance of a metallic biomaterial for orthopedic applications through changes in the surface oxide layer by nanocrystalline surface modification. Nanoscale. 2015;7(17):7704–7716. doi: 10.1039/C5NR00574D
11.
ZhangYS, HanZ, WangK, Friction and wear behaviors of nanocrystalline surface layer of pure copper. Wear. 2006;260(9–10):942–948. doi: 10.1016/j.wear.2005.06.010
12.
WenL, WangY, ZhouY, Microstructure and corrosion resistance of modified 2024 Al alloy using surface mechanical attrition treatment combined with microarc oxidation process. Corros Sci. 2011;53(1):473–480. doi: 10.1016/j.corsci.2010.09.061
13.
HuangR, LuS, HanY.Role of grain size in the regulation of osteoblast response to Ti-25Nb-3Mo-3Zr-2Sn alloy. Colloid Surf B Biointerf. 2013;111:232–241. doi: 10.1016/j.colsurfb.2013.06.007
14.
BagherifardS, HickeyDJ, de LucaAC, The influence of nanostructured features on bacterial adhesion and bone cell functions on severely shot peened 316L stainless steel. Biomaterials. 2015;73:185–197. doi: 10.1016/j.biomaterials.2015.09.019
15.
BagheriS, GuaglianoM.Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys. Surf Eng. 2013;25(1):3–14. doi: 10.1179/026708408X334087
16.
RitchieRO.The conflicts between strength and toughness. Nat Mater. 2011;10(11):817–822. doi: 10.1038/nmat3115
17.
ZhuKY, VasselA, BrissetF, Nanostructure formation mechanism of α-titanium using SMAT. Acta Mater. 2004;52(14):4101–4110. doi: 10.1016/j.actamat.2004.05.023
18.
WangK, TaoNR, LiuG, Plastic strain-induced grain refinement at the nanometer scale in copper. Acta Mater. 2006;54(19):5281–5291. doi: 10.1016/j.actamat.2006.07.013
19.
TaoNR, WuXL, SuiML, Grain refinement at the nanoscale via mechanical twinning and dislocation interaction in a nickel-based alloy. J Mater Res. 2011;19(06):1623–1629. doi: 10.1557/JMR.2004.0227
20.
WuX, TaoN, HongY, Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP. Acta Mater. 2002;50:2075–2084. doi: 10.1016/S1359-6454(02)00051-4
21.
ZhangHW, HeiZK, LiuG, Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment. Acta Mater. 2003;51(7):1871–1881. doi: 10.1016/S1359-6454(02)00594-3
22.
ChenXH, LuJ, LuL, Tensile properties of a nanocrystalline 316L austenitic stainless steel. Scr Mater. 2005;52(10):1039–1044. doi: 10.1016/j.scriptamat.2005.01.023
23.
LuK, LuJ.Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment. Mater Sci Eng A. 2004;375–377:38–45. doi: 10.1016/j.msea.2003.10.261
24.
LiaoM, LuX, ZhuX, Effect of nano-crystallization and annealing of Cr5Mo on its flow accelerated corrosion. Mater Prot. 2014;47:40–43.
25.
ZhaoYH, BingertJF, LiaoXZ, Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper. Adv Mater. 2006;18(22):2949–2953. doi: 10.1002/adma.200601472
26.
WeiY, LiY, ZhuL, Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins. Nat Commun. 2014;5:3580. doi: 10.1038/ncomms4580
27.
WangX, LiYS, ZhangQ, Gradient structured copper by rotationally accelerated shot peening. J Mater Sci Technol. 2017;33(7):758–761. doi: 10.1016/j.jmst.2016.11.006
28.
WangYF, HuangCX, WangMS, Quantifying the synergetic strengthening in gradient material. Scr Mater. 2018;150:22–25. doi: 10.1016/j.scriptamat.2018.02.039
29.
LiY, LiL, NieJ, Microstructural evolution and mechanical properties of a 5052 Al alloy with gradient structures. J Mater Res. 2017;32(23):4443–4451. doi: 10.1557/jmr.2017.310
30.
LiuX, WuK, WuG, High strength and high ductility copper obtained by topologically controlled planar heterogeneous structures. Scr Mater. 2016;124:103–107. doi: 10.1016/j.scriptamat.2016.07.003
31.
SymondsPS, YuTX.Counterintuitive behavior in a problem of elastic-plastic beam dynamics. J Appl Mech. 1985;52(3):517. doi: 10.1115/1.3169093
32.
LiQM, LiuYM, MaGW.The anomalous region of elastic–plastic beam dynamics. Int J Impact Eng. 2006;32(9):1357–1369. doi: 10.1016/j.ijimpeng.2005.01.003
33.
YangX, MaX, MoeringJ, Influence of gradient structure volume fraction on the mechanical properties of pure copper. Mater Sci Eng A. 2015;645:280–285. doi: 10.1016/j.msea.2015.08.037
34.
CaiB, MaX, MoeringJ, Enhanced mechanical properties in Cu–Zn alloys with a gradient structure by surface mechanical attrition treatment at cryogenic temperature. Mater Sci Eng A. 2015;626:144–149. doi: 10.1016/j.msea.2014.12.070
35.
WuX, JiangP, ChenL, Extraordinary strain hardening by gradient structure. Proc Natl Acad Sci USA. 2014;111(20):7197–7201. doi: 10.1073/pnas.1324069111
36.
YuX, LiY, LiL.Fracture mechanism of AZ31 magnesium alloy processed by equal channel angular pressing comparing three point bending test and tensile test. Eng Fail Anal. 2015;58:322–335. doi: 10.1016/j.engfailanal.2015.04.020
37.
MurdochH, DarlingK, RobertsA, Mechanical behavior of ultrafine gradient grain structures produced via ambient and cryogenic surface mechanical attrition treatment in iron. Metals. 2015;5(2):976–985. doi: 10.3390/met5020976
38.
WuXL, JiangP, ChenL, Synergetic strengthening by gradient structure. Mater Res Lett. 2014;2(4):185–191. doi: 10.1080/21663831.2014.935821
39.
YasnikovIS, VinogradovA, EstrinY.Revisiting the considère criterion from the viewpoint of dislocation theory fundamentals. Scr Mater. 2014;76:37–40. doi: 10.1016/j.scriptamat.2013.12.009
40.
KocksHMUF.Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci. 2003;48:171–273. doi: 10.1016/S0079-6425(02)00003-8
41.
WuX, ZhuY.Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Mater Res Lett. 2017;5(8):527–532. doi: 10.1080/21663831.2017.1343208
42.
LiJ, CaoY, GaoB, Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure. J Mater Sci. 2018;53(14):10442–10456. doi: 10.1007/s10853-018-2322-4
