The thermal and numerical simulation of the mould electromagnetic stirring (M-EMS) during continuous casting (CC) of the GCr15 bearing steel was performed. The thermal simulation apparatus with the M-EMS was used to examine the effect of stirring parameters on solidification structures. It was found that M-EMS enlarged the equiaxed grain regions, refined the grain size and resulted in more homogeneous distribution of the solute elements. The flow field in the mould was simulated to show the M-EMS intensity, which is in accordance with experimental observations. The mechanical properties of the blooms obtained at the current of 300A and frequency of 5 Hz are optimal.
H.K.D.H. Bhadeshia steels for bearings. Prog Mater Sci. 2012;57(2):268–435.
2.
YangL, ChengGG, LiSJ, A coupled model of TiN inclusion growth in GCr15SiCr during solidification in the electroslag remelting process. Int J Miner Metall. Mater. 2015;22(12):1266–1272.
3.
FuJW.Microstructure and corrosion behavior of hot-rolled GCr15 bearing steel. Appl Phys A-Mater Sci Process. 2016;122:416. doi:10.1007/s00339-016-9975-0.
4.
FlemingsCM.Our Understanding of Macrosegregation: Past and Present. ISIJ Int. 2000;40(9):833–841.
5.
ScholeA.Segregation in CC. Ironmak Steelmak. 2005;32(2):101–108.
6.
ChoudharySK, GangulyS.Morphology and segregation in continuously cast high carbon steel billets. ISIJ Int. 2007;47(12):1759–1766.
7.
SunH, LiL, ChengX, Reduction in macrosegregation on 380 mm×490 mm bloom caster equipped combination M + F-EMS by optimising casting speed. Ironmak Steelmak. 2015;42(6):439–449.
8.
GuoJ, QianDS, DengJD.Grain refinement limit during hot radial ring rolling of as-cast GCr15 steel. J Mater Process Tech. 2016;231:151–161.
9.
KyungSO, YoungWC.Macrosegregation behaviour in continuously cast high carbon steel blooms and billets at the final stage of solidification in combination stirring. ISIJ Int. 1995;35(7):866–875.
10.
ChoudharySK, GangulyS, SenguptaA, Solidification morphology and segregation in continuously cast steel slab. J Mater Process Tech. 2017;243:312–321.
11.
PikkarainenT, VuorenmaaV, RentolaI, Effect of superheat on macrostructure and macrosegregation in continuous cast low-alloy steel slabs). 4th International Conference on Advances in Solidification Processes; 2014 July 8–11; Beaumont Estates, Old Windsor: IOP; 2016.
12.
DuG, LiJ, WangZB.Control of carbide precipitation during electroslag remelting continuous rapid solidification of GCr15 steel. Metall Mater Trans B. 2017;48(6):2873–2890.
13.
TohT, HasegawaH, HaradaH.Evaluation of multiphase phenomena in Mold Pool under In-mold electromagnetic stirring in steel CC. ISIJ Int. 2001;41(10):1245–1251.
14.
NatarajanTT, El-KaddahN.Finite element analysis of electromagnetic and fluid flow phenomena in rotary electromagnetic stirring of steel. Appl Math Model. 2004;28(1):47–61.
15.
JavurekM, BarnaM, GittlerP, Flow modelling in continuous casting of round bloom strands with electromagnetic stirring. Steel Res Int. 2008;79(8):616–627.
16.
NakataH, InoueT, MoriH, Improvement of billet surface quality by ultra-high-frequency electromagnetic casting. ISIJ Int. 2002;42(3):264–272.
17.
TohT, TakeuchiE, HojoM, Electromagnetic control of initial solidification in continuous casting of steel by low frequency alternating magnetic field. ISIJ Int. 1997;37:1112.
18.
QiP, LiLB.Effects of electromagnetic stirring frequency on the microstructure and mechanical properties of Al-7Si-0.42 Mg-0.1Cu Alloy by semi-solid processing. Materials Science Forum Switzerland. 2017;898:104–110.
19.
SahooPP, KumarA, HalderJ, Optimisation of electromagnetic stirring in steel billet caster by using image processing technique for improvement in billet quality. ISIJ Int. 2009;49(4):521–528.
20.
WangSQ, de toledoGA, VälimaaK, Magnetohydrodynamic phenomena, fluid control and computational modeling in the CC of billet and bloom. ISIJ Int. 2014;54(10):2273–2282.
21.
StranskyK, KavickaF, SekaninaB, The effect of electromagnetic stirring on the crystallization of concast billets. Mater Technol. 2011;45(2):163–166.
22.
BridgeMR, RogersGD.Metall. Trans. B. 1984;15:581–589.
23.
TzavarasAA, BrodyHD.Electromagnetic stirring and continuous casting – achievements, problems, and goals. JOM.1984.
24.
ZimmermanWBJ.Comsol finite element multiphysics modeling and analysis. Beijing: Communication Press; 2007.
25.
XuY, XuRJ, FanZJ, Analysis of cracking phenomena in continuous casting of 1Cr13 stainless steel billets with final electromagnetic stirring. Int J Min Met Mater. 2016;23(5):534–541.
26.
GengX, LiX, LiuFB, Optimisation of electromagnetic field and flow field in round billet continuous casting mould with electromagnetic stirring. Ironmak Steelmak. 2015;42(9):675–682.
27.
CampanellaT, CharbonC, RappazM.Grain refinement induced by electromagnetic stirring: a dendrite fragmentation criterion. Metall Mater Trans A. 2004;35(10):3201–3210.
28.
DohertyRD.Comments on ‘mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts’. Scripta Mater. 2003;49:1219–1222.
29.
NafisiS, EmadiD, ShehataMT, Effects of electromagnetic stirring and superheat on the microstructural characteristics of Al–Si–Fe alloy. Mat Sci Eng A-Struct. 2006;432(1–2):71–83.
30.
TaghaviF, SaghafianH, KharraziYHK.Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy. Mater Design. 2009;30(1):115–121.
31.
MullisAM.Growth induced dendritic bending and rosette formation during solidification in a shearing flow. Acta Mater. 1999;47(6):1783–1789.
32.
KirkaldyJS, von Destinon-ForstmannJ, BrighamRJ.Simulation of banding in steels. Can Metall Q. 1962;1(1):59–81.
33.
GuoYF, SunMY, XuB, Effects of liquid fraction on the microstructure and mechanical properties in forge solidifying 12Cr1MoV steel. J Mater Process Technol. 2018;256:25–35.
