The copper-matrix composite contains carbon-fibre powder which is prepared using a powder metallurgy sintering process in an effort to examine the effects of 50-mesh (270 μm) carbon-fibre powder on the microstructure and, friction and wear properties of copper matrix composites at high speed. When carbon-fibre powder is added within a certain range, the friction coefficient of the composite material is increased and the amount of wear is greatly reduced, When the content of carbon-fibre powder is 0.2wt-%, the hardness, density, friction and wear properties of the copper-based composite material has the best combination.
WasilewskiP.Experimental study on the effect of formulation modification on the properties of organic composite railway brake shoe. Wear. 2017; 390–391:283–294.
2.
SinghTPatnaikAChauhanRAssessment of braking performance of lapinus-wollastonite fibre reinforced friction composite materials. J King Saud Univ Eng Sci. 2017; 29(2):183–190.
3.
MustafaAAbdollahMFBShuhimiFFSelection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method. Mater Des. 2015; 67:577–582.
4.
PrabhuaTRVarmaaVKVedantambS.Effect of SiC volume fraction and size on dry sliding wear of Fe/SiC/graphite hybrid composites for high sliding speed applications. Wear. 2014; 390:1–10.
5.
YuXGuoZMYangJEffect of content and friction components on properties of copper-based powder metallurgy friction material. Powder Metall Technol. 2014; 32(1):43–47.
6.
MaoKYaoQZGeCCInfluence of sintering atmosphere on properties of Cu-based P/M friction materials. Powder Metall Ind. 2011; 21(2):25–29.
7.
GhoshSKSahaP.Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process. Mater Des. 2011; 32(1):139–145.
8.
ZhaoYLiuRHRanXPreparation and characterization of copper matrix composite reinforced by carbon fiber. Hot Work Technol. 2015; 44(10):145–148.
9.
LiewKWNirmalU.Frictional performance evaluation of newly designed brake pad materials. Mater Des. 2013; 48:25–33.
10.
XiaoYLZhangZYYaoPPMechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribol Int. 2018; 119:585–592.
11.
ParkSJChoMS.Effect of anti-oxidative filler on the interfacial mechanical properties of carbon-carbon composites measured at high temperature. Carbon. 2000; 38:1053.
12.
ChandS.Carbon fibers for composites. J Mater Sci. 2000; 35:1303.
13.
XuXRLuoXJZhuangHRElectroless silver coating on fine copper powder and its effects on oxidation resistance. Mater Lett. 2003; 57:3987–3991.
14.
ShuklaSSealSRahamanZElectroless copper coating of cenospheres using silver nitrate activator. Mater Lett. 2002; 57:151–156.
15.
RoyYAGobivelKVijay SekarKSImpact of cutting forces and chip microstructure in high speed machining of carbon fiber – epoxy composite tube. Arch Metall Mater. 2017; 62(3):1771–1777.
16.
YanSLZhangZSSongZQProperties of wet copper-based friction materials containing carbon fiber. Mater Sci Eng Powder Metall. 2010; 15(2):186–190.
17.
XiaLJiaBBZengJWear and mechanical properties of carbon fiber reinforced copper alloy composites. Mater Charact. 2009; 60(5):363–369.
18.
TangYPLiuLZhaoHJStudy of friction and wear properties of Cu/short carbon fibers composites. J Mater Eng. 2007; 4:53–60.
19.
YangLWYaoGCWangDS.Depositing copper on carbon fiber and influence of carbon fiber to interface of Cf/Cu composite. Chin J Chem Eng. 2005; 56(7):1343–1348.
20.
ShabaniMPaydarMHZamiriRMicrostructural and sliding wear behavior of SiC-particle reinforced copper matrix composites fabricated by sintering and sinter-forging processes. Chin J Chem Eng. 2016; 5(1):5–12.
21.
JiangYLZhuHG.Research status of friction and wear properties of copper matrix composites. Mater Rep. 2014; 28(2):33–36.
22.
MoustafaSFEl-BadrySASanadAMFriction and wear of copper-graphite's make with Cu-coated and uncoated graphite powders. Wear. 2002; 253(7–8):699–710.
23.
LiuLTangYPZhaoHJZhuJHFabrication and properties of short carbon fibers reinforced copper matrix composites. J Mater Sci. 2008; 43(3):974–979.
24.
LiKQXiangXZBaiXJEffects of particle size and copper-coated graphite content on properties of the Cu/copper-coated graphite compose. Met Funct Mater. 2016; 23(1):47–50.
25.
SuLLGaoFHanXMTribological behavior of copper–graphite powder third body on copper-based friction materials. Tribol Lett. 2015; 60:1–12.
26.
HuangZXZhengZZhaoSCopper matrix composites reinforced by aligned carbon nanotubes: mechanical and tribological properties. Mater Des. 2017; 133:570–578.
27.
ZhangXZhangYZDuSMInfluence of braking conditions on tribological performance of copper-based powder metallurgical braking material. J Mater Eng Perform. 2018; 27:4473–4480.
28.
CheJMRenCZZhangS.Transitions in wear and friction of carbon fiber reinforced copper matrix composite sliding against AISI-1045 steel. Trans Tianjin Univ. 2007; 3:211–214.
