This study aims to determine the optimal CNC (Computer Numerical Control) machining conditions using an artificial neural network. For this purpose, Fagus orientalis, Castanea sativa, Pinus sylvestris, and Picea orientalis wood samples at 8%, 12%, and 15% moisture content (MC) were machined on a CNC router in both across and along the grain directions. Based on the experimental data of surface roughness and cutting power analyses, a total of 16 models were used. These were selected in hundreds of models that have the lowest error. The spindle speed, feed rate, and the number of cutter teeth were chosen to be different with the literature based on the length of cutter mark. As a result, optimum machining parameters were determined for each wood MC.
MalkocogluAOzdemirT.The machining properties of some hardwoods and softwoods naturally grown in Eastern Black Sea Region of Turkey. J Mater Process Technol. 2006;173(3):315–320.
2.
PelitHKorkmazMBudakciM.Surface roughness of thermally treated wood cut with different parameters in CNC router machine. BioResources. 2021;16(3):5133–5147.
3.
ZhongZW.Surface roughness of machined wood and advanced engineering materials and its prediction: a review. Adv Mech Eng. 2021;13(5):1–19.
CsanádyEMagossE.Mechanics of wood machining. Berlin: Springer; 2013.
6.
HazirEKocKH.Optimization of wood machining parameters in CNC routers: Taguchi orthogonal array based simulated angling algorithm. Maderas Ciencia Tecnol. 2019;21(4):493–510.
7.
BinaliRKuntogluMPimenovDYAdvance monitoring of hole machining operations via intelligent measurement systems: a critical review and future trends. Measurement (Mahwah N J). 2022;201:1–27.
8.
AguileraAMartinP.Machining qualification of solid wood of Fagus silvatica L. and Picea excelsa L.: cutting forces, power requirements and surface roughness. Holz Roh-und Werkstoff. 2001;59(6):483–488.
9.
CristóvãoL.Machining properties of wood: tool wear, cutting force and tensioning of blades [Doctoral dissertation]. Skellefteå: Luleå tekniska universitet; 2013.
10.
PorankiewiczBMarklundBGrönlundAMain and normal cutting forces by machining wood of Pinus sylvestris. BioResources. 2011;6(4):3687–3713.
11.
KumarKRanjanCDavimJP.Non-conventional machining. CNC programming for machining. Materials forming, machining and tribology. Cham: Springer; 2020. p. 73–87.
12.
SofuogluSD.Using artificial neural networks to model the surface roughness of massive wooden edge-glued panels made of scotch pine (Pinus sylvestris L.) in a machining process with computer numerical control. BioResources. 2015;10(4):6797–6808.
13.
CakmakA.Investigation of optimal parameters with artificial neural networks in machining of some wood species in CNC router machine [Doctoral thesis]. Trabzon: Karadeniz Technical University; 2021.
14.
ZhangGPatuwoBEHuMY.Forecasting with artificial neural networks: the state of the art. Int J Forecast. 1998;14(1):35–62.
15.
OzsahinSMuratM.Prediction of equilibrium moisture content and specific gravity of heat-treated wood by artificial neural networks. Eur J Wood Wood Prod. 2018;76(2):563–572.
16.
SavkovicBKovacPRodicDComparison of artificial neural network, fuzzy logic and genetic algorithm for cutting temperature and surface roughness prediction during the face milling process. Adv Prod Eng Manage. 2020;15(2):137–150.
17.
OzsahinSSingerH.Development of an artificial neural network model to minimize power consumption in the milling of heat-treated and untreated wood. Kastamonu Univ J Forestry Faculty. 2019;19(3):317–328.
18.
TiryakiSOzsahinSAydinA.Employing artificial neural networks for minimizing surface roughness and power consumption in abrasive machining of wood. Eur J Wood Wood Prod. 2017;75(3):347–358.
19.
GurgenACakmakAYildizSOptimization of CNC operating parameters to minimize surface roughness of Pinus sylvestris using integrated artificial neural network and genetic algorithm. Maderas Ciencia Tecnol. 2022;24(1):1–12.
20.
PimenovDYBustilloAWojciechowskiSArtificial intelligence systems for tool condition monitoring in machining: analysis and critical review. J Intell Manuf. 2022:1–43. doi:10.1007/s10845-022-01923-2.
21.
DemirACakirogluEOAydinI.Determination of CNC processing parameters for the best wood surface quality via artificial neural network. Wood Material Science & Engineering. 2022;17(6):685–692.
22.
TiryakiSMalkocogluAOzsahinS.Artificial neural network modeling to predict optimum power consumption in wood machining. Drewno. 2016;59(196):109–125.
23.
IskraPHernándezRE.The influence of cutting parameters on the surface quality of routed paper birch and surface roughness prediction modeling. Wood Fiber Sci. 2009;41(1):28–37.
24.
PrommulKKaewtatipPArlaiTInvestigation on the influences of cutting parameters in CNC machining of rubber wood with integration of neural networks. 2nd international symposium on wood machining; Vienna, Austria; 2004.
25.
ChladilJSedlákJRybářováEŠCutting conditions and tool wear when machining wood-based materials. BioResources. 2019;14(2):3495–3505.
26.
KazlauskasDJankauskasVBendikienėRWear of cemented tungsten carbide (WC) router cutters during oak wood milling. Mechanika. 2017;23(3):469–472.
27.
KaragozUAkyildizMHIsleyenO.Effect of heat treatment on surface roughness of thermal wood machined by CNC. Pro Ligno. 2011;7(4):50–58.
28.
LemasterRLStewartJS.Wood machining and tooling research programs research summary. Proceedings of the 3rd international symposium. Raleigh: North Carolina State University Wood and Paper Science Dept; 1994.
29.
MalkocogluA.Machining properties and surface roughness of various wood species planed in different conditions. Build Environ. 2007;42(7):2562–2567.
30.
RamanakotoMFAndrianantenainaANRamananantoandroTVisual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters. Eur J Wood Wood Prod. 2017;75(5):825–837.
31.
MitchellPHLemasterRL.Investigation of machine parameters on the surface quality in routing soft maple. Forest Prod J. 2002;52(6):85.
32.
ŠkaljićNBeljo LučićRČavlovićAEffect of feed speed and wood species on roughness of machined surface. Drvna Indus. 2009;60(4):229–234.
33.
SogutluC.The effect of some factors on surface roughness at planning process of cedar wood. J Polytech. 2010;13(3):177–181.
34.
AykacESofuogluSD.Investigation of the effect of machining parameters on surface quality in bamboo. Tehnički Vjesnik. 2021;28(2):684–688.
35.
SuW-CWangY.Effect of the helix angle of router bits on chip formation and energy consumption during milling of solid wood. J Wood Sci. 2002;48(2):126–131. doi:10.1007/BF00767289
36.
SutcuAKaragozU.The influence of process parameters on the surface roughness in aesthetic machining of wooden edge-glued panels (EGPs). BioResources. 2013;8(4):5435–5448.
37.
JiangSBuckDTangQCutting force and surface roughness during straight-tooth milling of walnut wood. Forests. 2022;13(12):2126.
38.
KminiakR.The effect of selected factors on the milled surface quality of native sycamore maple wood and thermally modified sycamore maple wood. Innov Woodworking Ind Eng Des. 2019;8(1):105–112.
39.
DavisEM.Machining and related characteristics of United States hardwoods. Washington (DC): U.S. Department of Agriculture; 1962.
40.
KochP.Wood machining processes; a volume in the wood processing series. New York: The Ronald Press Company; 1964.
41.
StewartHA.Some surfacing defects and problems related to wood moisture content. Wood Fiber Sci. 1980;12(3):175–182.
42.
PinheiroCde Sampaio AlvesMCSimões AmaralS.Moisture content and its influence on the roughness and noise emission during wood machining. Advanced Materials Research. 2015;1088:680–685.
43.
FuWGuanHChenB.Investigation on the influence of moisture content and wood section on the frictional properties of beech wood surface. Tribol Trans. 2021;64(5):830–840.
44.
NaylorAHackneyP.A review of wood machining literature with a special focus on sawing. BioResources. 2013;8(2):3122–3135.
45.
DurkovicMMladenovicGTanovicLImpact of feed rate, milling depth and tool rake angle in peripheral milling of oak wood on the cutting force. Maderas Ciencia Tecnol. 2018;20(1):25–34.
46.
KoledaPBarcíkŠSvoreňJInfluence of cutting wedge treatment on cutting power, machined surface quality, and cutting-edge wear when plane milling oak wood [cutting edge wear; cutting power; plane milling; surface roughness]. BioResources. 2019;14(4):9271–9286.
47.
SedleckýMGašparíkM.Power consumption during edge milling of medium-density fiberboard and edge-glued panel. BioResources. 2017;12(4):7413–7426.
48.
BalBCDumanoğluF.Surface roughness and processing time of a medium density fiberboard cabinet door processed via CNC router, and the energy consumption of the CNC router. BioResources. 2019;14(4):9500–9508.
49.
SalcaE-A.Optimization of wood milling schedule – a case study. Dimensions. 2015;2000:160.
50.
ZhuZBuckDGuoXEnergy efficiency optimization for machining of wood plastic composite. Machines. 2022;10(2):104.
51.
MendozaBA.Power consumption and planing quality of coconut lumber (Cocos nucifera L.) as affected by density and some machining variable [Doctoral thesis]. Los Banos: Philippines University; 1989.
52.
BerkelA.Wood machining technology. Vol. 183. İstanbul: Faculty of Forestry of İstanbul University; 1972.
53.
RossRJ.Wood handbook: wood as an engineering material. Vol. 190. Madison, WI: United States Department of Agriculture Forest Service; 2010.
54.
EymaFMéausooneP-JMartinP.Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B. Ann For Sci. 2004;61(1):55–64.
55.
GurleyenLSubasiS.The compulsions which the hard tree materials show against to the cutters and machine in planning process. J Faculty Eng Architect Gazi Univ. 2009;24(2):209–219.
