Fluoridated hydroxyapatite (FHAp) coating was directly fabricated on AZ91D magnesium alloy without using any chelating agents by a facile hydrothermal method. The results show that the as-prepared coating is mainly composed of FHAp and magnesium whitlockite. The morphology of the FHAp coating is changed with the increase of the F− ion doping amount, and the FHAp-0.04 coating has a much uniform and dense structure than the FHAp-0.02 coating. The FHAp coating can remarkably reduce the corrosion rate of the substrate in simulated body fluid (SBF) solution, particularly during the initial immersion stages. Moreover, the FHAp coating can also induce the formation of apatite particles after being immersed in SBF, indicating the good bioactivity of the coating.
ParamsothyM. and RamakrishnaS.: ‘Biodegradable materials for clinical applications: a review’, Rev. Adv. Sci. Eng., 2015,
4, (3), 221–238. doi: 10.1166/rase.2015.1097
2.
QiuX., WanP., TanL. L., FanX. M. and YangK.: ‘Preliminary research on a novel bioactive silicon doped calcium phosphate coating on AZ31 magnesium alloy via electrodeposition’, Mater. Sci. Eng. C, 2014,
36, 65–76. doi: 10.1016/j.msec.2013.11.041
3.
Bakhsheshi-RadH. R., HamzahE., DaroonparvarM., YajidM. A. M., Kasiri-AsgaraniM., Abdul-KadirM. R. and MedrajM.: ‘In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite’, Trans. Nonferrous Met. Soc. China, 2014,
24, 2516–2528. doi: 10.1016/S1003-6326(14)63378-1
4.
MousaH. M., HusseinK. H., WooH. M., ParkC. H. and KimC. S.: ‘One-step anodization deposition of anticorrosive bioceramic compounds on AZ31B magnesium alloy for biomedical application’, Ceram. Int., 2015,
41, 10861–10870. doi: 10.1016/j.ceramint.2015.05.027
5.
MousaH. M., LeeD. H., ParkC. H. and KimC. S.: ‘A novel simple strategy for in situ deposition of apatite layer on AZ31B magnesium alloy for bone tissue regeneration’, Appl. Surf. Sci., 2015,
351, 55–65. doi: 10.1016/j.apsusc.2015.05.099
6.
RazaviM., FathiM., SavabiO., BeniB. H., VashaeeD. and TayebiL.: ‘Surface microstructure and in vitro analysis of nanostructured akermanite (Ca2MgSi2O7) coating on biodegradable magnesium alloy for biomedical applications’, Colloids Surf. B: Biointerfaces, 2014,
117, 432–440. doi: 10.1016/j.colsurfb.2013.12.011
7.
HouS.: ‘Solvothermal fabrication of TiO2 nanosheet films on degradable Mg-Zn alloys’, Sur. Eng., 2016. Doi:10.1080/02670844.2015.1134855.
8.
SurmenevR. A., SurmenevaM. A. and IvanovaA. A.: ‘Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis-A review’, Acta Biomater., 2014,
10, 557–579. doi: 10.1016/j.actbio.2013.10.036
9.
GuanJ. J., TianB., TangS., KeQ. F., ZhangC. Q., ZhuZ. A. and GuoY. P.: ‘Hydroxyapatite coatings with oriented nanoplate arrays: synthesis, formation mechanism and cytocompatibility’, J. Mater. Chem. B, 2015,
3, 1655–1666. doi: 10.1039/C4TB02085E
10.
HasniyatiM., ZuhailawatiH., SivakumarR., DhindawB. K. and NoorS. N. F. M.: ‘Cold spray deposition of hydroxyapatite powder onto magnesium substrates for biomaterial applications’, Sur. Eng., 2015,
31, (11), 867–874. doi: 10.1179/1743294415Y.0000000068
11.
RojaeeR., FathiM. and RaeissiK.: ‘Controlling the degradation rate of AZ91 magneisum alloy via sol-gel derived nanostructured hydroxyapatite coating’, Mater. Sci. Eng. C, 2013,
33, 3817–3825. doi: 10.1016/j.msec.2013.05.014
12.
SongY. W., ShanD. Y. and HanE. H.: ‘Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application’, Mater. Lett., 2008,
62, 3276–3279. doi: 10.1016/j.matlet.2008.02.048
13.
CuiW., BeniashE., GawaltE., XuZ. and SfeirC.: ‘Biomimetic coating of magnesium alloy for enhanced corrosion resistance and calcium phosphate deposition’, Acta Biomater., 2013,
9, 8650–8659. doi: 10.1016/j.actbio.2013.06.031
HiromotoS. and YamamotoA.: ‘High corrosion resistance of magnesium coated with hydroxyapatite directly synthesized in an aqueous solution’, Electrochim. Acta, 2009,
54, 7085–7093. doi: 10.1016/j.electacta.2009.07.033
16.
DorozhkinS. V.: ‘Calcium orthophosphate coatings on magnesium and its biodegradable alloys’, Acta Biomater., 2014,
10, 2919–2934. doi: 10.1016/j.actbio.2014.02.026
17.
HiromotoS. and TomozawaM.: ‘Corrosion behavior of magnesium with hydroxyapatite coatings formed by hydrothermal treatment’, Mater. Trans., 2010,
51, 2080–2087. doi: 10.2320/matertrans.M2010192
18.
RazaviM., FathiM., SavabiO., VashaeeD. and TayebiL.: ‘Biodegradable magnesium alloy coated by fluoridated hydroxyapatite using MAO/EPD technique’, Sur. Eng., 2014,
30, (8), 545–551. doi: 10.1179/1743294414Y.0000000284
19.
WangJ., ChaoY. L., WanQ. B., ZhuZ. M. and YuH. Y.: ‘Fluoridated hydroxyapatite coatings on titanium obtained by electrochemical deposition’, Acta Biomater., 2009,
5, 1798–1807. doi: 10.1016/j.actbio.2009.01.005
20.
Bakhsheshi-RadH. R., HamzahE., DaroonparvarM., Ebrahimi-KahrizasangiR. and MedrajM.: ‘In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg-Ca alloys for biomedical applications’, Ceram. Int., 2014,
40, 7971–7982. doi: 10.1016/j.ceramint.2013.12.147
21.
RojaeeR., FathiM., RaeissiK. and SharifnabiA.: ‘Biodegradation assessment of nanostructured fluoridated hydroxyapatite coatings on biomedical grade magnesium alloy’, Ceram. Int., 2014,
40, 15149–15158. doi: 10.1016/j.ceramint.2014.06.129
22.
ASTM Standard G31–72: ‘Standard practice for laboratory immersion corrosion testing of metals’ in ‘ASTM standards’, (ed. Albert Roessner), 329–335;2004, Philadelphia, PA, USA, Elsevier
.
23.
LagierR. and BaudC. A.: ‘Magnesium whitlockite, a calcium phosphate crystal of special interest in pathology’, Pathol. Res. Pract., 2003,
199, 329–335. doi: 10.1078/0344-0338-00425
24.
DhertW. J., KleinC. P., WolkeJ. G., van der VeldeE. A., de GrootK. and RozingP. M.: ‘A mechanical investigation of fluorapatite, magnesiumwhitlockite, and hydroxylapatite plasma-sprayed coatings in goats’, J. Biomed. Mater. Res., 1991,
25, (10), 1183–1200. doi: 10.1002/jbm.820251002
25.
ParkJ. H., LeeY. K. and KimK. M.: ‘Bioactive calcium phosphate coating prepared on H2O2-treated titanium substrate by electrodeposition’, Surf. Coat. Technol., 2005,
195, 252–257. doi: 10.1016/j.surfcoat.2004.08.185
26.
TangH., YuD. Z., LuoY. and WangF.: ‘Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatment’, Appl. Surf. Sci., 2013,
264, 816–822. doi: 10.1016/j.apsusc.2012.10.146
27.
MohajerniaSh., HejaziS., EslamiA. and SaremiM.: ‘Modified nanostructured hydroxyapatite coating to control the degradation of magnesium alloy AZ31 in simulated body fluid’, Surf. Coat. Technol., 2015,
263, 54–60. doi: 10.1016/j.surfcoat.2014.12.059
28.
LiuG. Y., TangS. W., LiD. C. and HuJ.: ‘Self-adjustment of calcium phosphate coating on micro-arc oxidized magnesium and its influence on the corrosion behavior in simulated body fluids’, Corros. Sci., 2014,
79, 206–214. doi: 10.1016/j.corsci.2013.11.011
29.
SongY., ZhangS. X., LiJ. N., ZhaoC. L. and ZhangX. N.: ‘Electrodeposition of Ca-P coatings on biodegradable Mg alloy: in vitro biomineralization behavior’, Acta Biomater., 2010,
6, 1736–1742. doi: 10.1016/j.actbio.2009.12.020
