Characterisation of the structure and the tribological behaviour of PN/PVD duplex processed Ti6Al4V

Abstract

A duplex process including plasma nitriding (PN) and physical vapour deposition (PVD) of TiN was carried out for improvement of the tribological properties of Ti6Al4V alloy. Samples were characterised by optical microscope, field emission scanning electron microscope, atomic force microscope, energy dispersive spectroscopy, X-ray diffraction and microhardness. The sharp interface of PVD coating led to the quick failure of TiN, while the PN process distributed hardness profile gradually, but decreased surface quality. The duplex process optimised surface hardness, interface hardness gradient and coefficient of friction by four regions. The outer region (I) was δ-TiN, which was formed by PVD. Region II consisted of ‘δ-TiN+ε-Ti₂N’, regions III was Al-enriched, and region IV showed a diffusion zone produced during PN. These structures led to high surface hardness, gradual hardness profile, reasonable surface quality, optimum friction behaviour and superior wear resistance. Overall, the duplex process improved the tribological properties of Ti6Al4V alloy significantly, as compared to the single stage PVD and the separate PN treatment.

Keywords

Duplex process Plasma nitriding PVD TiN Ti6Al4V alloy Wear friction

Get full access to this article

View all access options for this article.

References

Boyer

R. F.

and Collings

: ‘Materials properties handbook: titanium alloys’, 1994, OH, ASM international.

Dong

: ‘Tribological properties of titanium-based alloys’, in ‘Surface engineering of light alloys: aluminum, magnesium and titanium alloys’, (ed. Dong

), 58–82; 2010, Birmingham , Woodhead Publishing Limited.

Wilson

, Matthews

, Housden

, Turner

and Garside

: ‘A comparison of the wear and fatigue properties of plasma-assisted physical vapour deposition TiN, CrN and duplex coatings on Ti-6Al-4V’, Surf. Coat. Technol., 1993, 62, 600–607. doi: 10.1016/0257-8972(93)90306-9

Salehi

and Hosseini

S. R.

: ‘Development of innovative Ti-Cu intermetallic compound coating’, Recent Dev. Light Met., 1994, 405–411.

Hosseini

S. R.

and Salehi

: ‘Glow discharge optical spectroscopy of Ti-Cu intermetallic coatings’, in ‘Heat treatment and surface engineering’, (ed. Salehi

), 81–89; 1995, Iran , ISSST.

Salehi

and Hosseini

S. R.

: ‘Structural characterisation of novel Ti-Cu intermetallic coatings’, Surf. Eng., 1996, 12, 221–224. doi: 10.1179/sur.1996.12.3.221

Borgioli

, Galvanetto

, Fossati

and Pradelli

: ‘Glow-discharge and furnace treatments of Ti-6Al-4V’, Surf. Coat. Technol., 2004, 184, 255–262. doi: 10.1016/j.surfcoat.2003.10.004

, Xu

and Jie

: ‘Wear behavior of the surface of Ti–6Al–4V alloy modified by treating with a pulsed d.c. plasma-duplex process’, Surf. Coat. Technol., 2004, 185, 205–209. doi: 10.1016/j.surfcoat.2003.11.028

Avelar-Batista

, Spain

, Housden

, Matthews

and Fuentes

: ‘Plasma nitriding of Ti6Al4V alloy and AISI M2 steel substrates using D.C. glow discharges under a triode configuration’, Surf. Coat. Technol., 2005, 200, 1954–1961. doi: 10.1016/j.surfcoat.2005.08.037

10.

Zhecheva

, Sha

, Malinov

and Long

: ‘Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods’, Surf. Coat. Technol., 2005, 200, 2192–2207. doi: 10.1016/j.surfcoat.2004.07.115

11.

Nolan

, Huang

S. W.

, Leskovsek

and Braun

: ‘Sliding wear of titanium nitride thin films deposited on Ti–6Al–4V alloy by PVD and plasma nitriding processes’, Surf. Coat. Technol., 2006, 200, 5698–5705. doi: 10.1016/j.surfcoat.2005.08.110

12.

Avelar-Batista

, Spain

, Fuentes

, Sola

, Rodriguez

and Housden

: ‘Triode plasma nitriding and PVD coating: A successful pre-treatment combination to improve the wear resistance of DLC coatings on Ti6Al4V alloy’, Surf. Coat. Technol., 2006, 201, 4335–4340. doi: 10.1016/j.surfcoat.2006.08.070

13.

Rahman

, Duggan

, Dowling

and Hashmi

: ‘Continuously deposited duplex biomedical coatings’, Surf. Coat. Technol., 2007, 201, 5310–5317. doi: 10.1016/j.surfcoat.2006.07.179

14.

Yildiz

, Yetim

, Alsaran

and Celik

: ‘Plasma nitriding behavior of Ti6Al4V orthopedic alloy’, Surf. Coat. Technol., 2008, 202, 2471–2476. doi: 10.1016/j.surfcoat.2007.08.004

15.

Yetim

, Alsaran

, Efeoglu

and Çelik

: ‘A comparative study: the effect of surface treatments on the tribological properties of Ti–6Al–4V alloy’, Surf. Coat. Technol., 2008, 202, 2428–2432. doi: 10.1016/j.surfcoat.2007.08.027

16.

Cassar

, Wilson

, Banfield

, Housden

, Matthews

and Leyland

: ‘A study of the reciprocating-sliding wear performance of plasma surface treated titanium alloy’, Wear, 2010, 269, 60–70. doi: 10.1016/j.wear.2010.03.008

17.

R. Y. Q.

: ‘Duplex surface treatments of light alloys’, in ‘Surface engineering of light alloys: aluminum, magnesium and titanium alloys’, (ed. Dong

), 501–548; 2010, Birmingham , Woodhead Publishing Limited.

18.

Prem Ananth

and Ramesh

: ‘Tribological improvement of titanium alloy surfaces through texturing and TiAlN coating’, Surf. Eng., 2014, 30, (10), 758–762. doi: 10.1179/1743294414Y.0000000293

19.

Ahmed

, Chakrabarty

, Bhowmik

, Mukherjee

and Rane

: ‘Plasma nitriding on titanium surface for adhesion promotion’, Surf. Eng., 2015, 31, (8), 616–622. doi: 10.1179/1743294415Y.0000000017

20.

Qin

Y. K.

, Xiong

D. S.

, Li

J. L.

and Tyagi

: ‘Compositions and tribological properties of PEO coatings on Ti6Al4V alloy’, Surf. Eng., 2016.

21.

Bell

, Dong

and Sun

: ‘Realising the potential of duplex surface engineering’, Tribol. Int., 1998, 31, 127–137. doi: 10.1016/S0301-679X(98)00015-2

22.

Zheng

, Sun

, Bloyce

and Bell

: ‘Characterization of plasma nitrided and PVD-TiN duplex treated armco iron and En40B steel by nanoindentation’, Mater. Manuf. Process., 2009, 10, (4), 815–824. doi: 10.1080/10426919508935068

23.

Hakami

, Pramanik

and Basak

A. K.

: ‘Duplex surface treatment of steels by nitriding and chromizing’, Aust. J. Mech. Eng., 2016, 1–18.

24.

Mosayebi

M. J.

and Hosseini

S. R.

: ‘Structural and tribological properties of TiC-DLC coatings deposited by RCAE-PVD at various bias voltages’, Surf. Eng., 2015, 31, (2), 96–102. doi: 10.1179/1743294414Y.0000000395

25.

Avelar-Batista Wilson

J. C.

, Banfield

, Housden

, Olivero

and Chapon

: ‘On the response of Ti–6Al–4V and Ti–6Al–7Nb alloys to a Nitron-100 treatment’, Surf. Coat. Technol., 2014, 260, 335–346. doi: 10.1016/j.surfcoat.2014.11.034

26.

Kao

W. H.

, Su

Y. L.

, Horng

J. H.

, Huang

H. C.

and Yang

S. E.

: ‘Improved tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy by gas-nitriding and Ti–C:H coating’, Surf. Coat. Technol., 2015, 283, 70–79. doi: 10.1016/j.surfcoat.2015.10.035

27.

Niu

, Li

, Wang

, Chen

and Xue

: ‘Structure and tribological behavior of GLCH/nitride coupled coatings on Ti6Al4V by nitriding and magnetron sputtering’, Diam. Relat. Mater., 2016, 64, 70–79. doi: 10.1016/j.diamond.2016.01.015

28.

Hosseini

S. R.

and Ahmadi

: ‘Evaluation of the effects of plasma nitriding temperature and time on the characterisation of Ti 6Al 4V alloy’, Vacuum, 2013, 87, 30–39. doi: 10.1016/j.vacuum.2012.06.008

29.

Wriedt

H. A.

and Murray

J. L.

: ‘The N-Ti (nitrogen-titanium) system’, Bull. Alloy Phase Diagrams, 1987, 8, 378–388. doi: 10.1007/BF02869274

30.

Fossati

, Borgioli

, Galvanetto

and Bacci

: ‘Corrosion resistance properties of plasma nitrided Ti–6Al–4V alloy in nitric acid solutions’, Corros. Sci., 2004, 46, 917–927. doi: 10.1016/S0010-938X(03)00188-4

31.

Mattox

D. M.

: ‘Atomistic film growth and some growth-related film properties’, in ‘Handbook of physical vapor deposition (PVD) processing’, 2nd edn, 333–3908; 2010, Oxford , Elsevier.