In this study, the influence of microscopic defects on the elastic modulus and damping of hard coatings was examined by finite element (FE) analysis. We present a method based on image processing and FE modelling to calculate the elastic modulus and loss factor of hard coatings. The calculated results agree with the results of the dynamic mechanical analysis. Furthermore, by using this method, the effects of the loading and friction coefficient between cracks on loss factor of hard coatings are studied. From the microscopic point of view, we study the relationship between the microscopic defects and macroscopic properties of the coating, thus providing a new idea for simulating and actively designing hard coatings.
ChenY, ZhaiJ, HanQ.Multiobjective optimization of hard coating parameters designing for damping of the bladed disk. Proc Inst Mech Eng G J Aerosp Eng. 2017. doi:095441001770314.
2.
Wu HY, Zhang PZ, XuZ.Study on nanomechanical and high temperature tribological behaviour of Ti2AlNb based alloys by plasma surface alloying. Surf Eng. 2013;24(6):464–469. doi: 10.1179/026708408X336373
3.
Ershad-LangroudiA, AbdollahiH, RahimiA.Mechanical properties of solage prepared nanocomposite coatings in the presence of titania and alumina-derived nanoparticles. Plast Rubber Compos. 2016;46:25–34. Magyar. doi: 10.1080/14658011.2016.1245821
4.
FuQS, YangRS, LiMT.Study on elastic modulus of porous Ti coatings by three-point bending and indentation measurement. Adv Mater Res. 2014;910:74–77. doi: 10.4028/www.scientific.net/AMR.910.74
5.
TillmannW, SelvaduraiU, LuoW.Measurement of the young's modulus of thermal spray coatings by means of several methods. J Therm Spray Technol. 2013;22:290–298. doi: 10.1007/s11666-012-9855-x
6.
WeiCG, BaoYW, CaoXQ, Determining elastic modulus of ceramic coatings at elevated temperature using impulse excitation technology. Key Eng Mater. 2016;680:13–16. doi: 10.4028/www.scientific.net/KEM.680.13
7.
SburlatiR, AtashipourSR, Hosseini-HashemiS.Study on the effect of functionally graded coating layers on elastic deformation of thick circular plates: A closed-form elasticity solution. Compos Struct. 2013;99:131–140. doi: 10.1016/j.compstruct.2012.10.042
8.
NieG, BaoY, WanD, Evaluating the elastic modulus of the ceramic glaze coating using impulse excitation technology. 2016. DOI.
9.
BlackweC, PalazottoA, GeorgeTJ, The evaluation of the damping characteristics of a hard coating on titanium. Shock Vib. 2014;96:1350–1354.
10.
EasterdayO, PalazottoA, BranamR, Experimental characterization of damping properties of coatings at elevated temperatures using a free-free beam based apparatus. In: Aiaa/asme/asce/ahs/asc Structures, Structural Dynamics and Materials Conference. 2013. p. 32-92.
11.
ShackelfordJF.Introduction to materials science for engineers. Zug, Switzerland
: Pearson Schweiz Ag; 2015.
12.
SantanaYY, Barbera-SosaLJG, CaroJ, Mechanical properties and microstructure of WC-10Co-4Cr and WC-12Co thermal spray coatings deposited by HVOF. Surf Eng. 2013;24(5):374–382. doi: 10.1179/174329408X326380
13.
YangXC, LiGL, WangHD, Effect of flame remelting on microstructure and wear behaviour of plasma sprayed NiCrBSi-30%Mo coating. Surf Eng. 2016;34(3):181–188. doi: 10.1080/02670844.2016.1226053
14.
SevostianovI, KachanovM.Elastic and conductive properties of plasma-sprayed ceramic coatings in relation to their microstructure: An overview. J Therm Spray Technol. 2009;18:822–834. doi: 10.1007/s11666-009-9344-z
15.
Al-RubRKA, PalazottoAN.Micromechanical theoretical and computational modeling of energy dissipation due to nonlinear vibration of hard ceramic coatings with microstructural recursive faults. Int J Solids Struct. 2010;47:2131–2142. doi: 10.1016/j.ijsolstr.2010.04.016
16.
KováříkO, HaušildP, ČapekJ, Damping measurement during resonance fatigue test and its application for crack detection in TBC samples. in J Fatigue 2016;82(2): 300–309.
17.
DuGY, ZhenT, BaDC, Preparation and damping properties of NiCrAlY coating by Arc Ion plating. J Northeastern Univ. 2012;33:727–730.
18.
SunG, ZhouR, LuJ, Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel. Acta Mater. 2015;84:172–189. doi: 10.1016/j.actamat.2014.09.028
19.
AlrubRA, PalazottoA.Mesoscale energy dissipation prediction in thermal barrier ceramic coatings under nonlinear vibration. In: Aiaa/asme/asce/ahs/asc Structures, Structural Dynamics. and Materials Conference Aiaa/asme/ahs Adaptive Structures Conference; 2013.
20.
BiswasS, JanaP, ChatterjeeA.Hysteretic damping in an elastic body with frictional microcracks. Int J Mech Sci. 2016;108-109:61–71. doi: 10.1016/j.ijmecsci.2016.01.029
21.
AlsaranA, AlbayrakÃ. Effect of single and duplex surface treatments on wear properties of CP-Ti. Surf Eng. 2014;27(3):205–210. doi: 10.1179/026708410X12687356948391
22.
RenJ, Liu XB, Lu XL, Microstructure and tribological properties of self-lubricating antiwear composite coating on Ti6Al4 V alloy. Surf Eng. 2017;33(1):20–26. doi: 10.1179/1743294415Y.0000000054
23.
KovarD, ThoulessM.Simple method for determining frictional sliding resistance and frictional energy dissipation in layered ceramics. J Am Ceram Soc. 2010;80(3):673–679. doi: 10.1111/j.1151-2916.1997.tb02883.x
24.
ChenTC, ChenWH.Frictional contact analysis of multiple cracks by incremental displacement and resultant traction boundary integral equations. Eng Anal Bound Elem. 1998;21(4):339–348. doi: 10.1016/S0955-7997(98)00022-8
