Study on transport phenomena in the beam blank continuous casting mould coupling copper mould with molten steel

The copper mould and molten steel were modelled simultaneously by a three-dimensional (3D) model, which couples fluid flow, heat transfer and solidification. Thermal boundary conditions (e.g. air gap distribution, slag resistance, contact resistance) along casting direction and circumference direction were discussed and applied. The results of solid shell thickness distribution were compared with reference experimental data and reasonable agreements were found. The calculations indicate that, the shell thickness distribution along circumference in web was affected by the cross-section sizes. The uniform shell thickness distributions at narrow face and R corner were caused by the scouring of fluid flow. The heat transfer fluxes at hot face of mould were various at different locations.