Flow pattern control in continuous slab casting moulds: physical modelling and plant trials

Full-scale water modelling studies combined with nail-dipping industrial trials at Shougang Jingtang (SGJT) Works were carried out in order to investigate the parameters that influence flow patterns in the continuous slab casting mould. The effects of casting speed/mould width combinations, argon bubbling flow rates, submerged entry nozzle (SEN) immersion depths and SEN geometries (port angle and bottom shape) on the flow patterns were examined. A CMI factor defined as casting speed/mould width ratio index is put forward to describe the combined effect of these parameters on the fluid flow patterns in the mould. The results show that the CMI and argon injection rates are the dominant factors that determine the flow pattern. On the basis of the results from this study, critical argon flow rates for different casting combinations have been evaluated. These findings provide operating guidelines for generating optimal flow patterns based on double roll flow with appropriate surface velocities in continuous slab casting moulds. On the basis of these considerations, slab quality at SGJT Works was substantially improved and the percentage of flow pattern-related sliver defects in cold rolled products was decreased from 4.5 to 2.3%.