Enhancing the heat transfer to the material being welded, instead of the tool, will improve the welding thermal efficiency. Friction stir welding of 5 mm thick 6061-T6 aluminium alloy plates was carried out with the newly produced tools. It was found that the thermal efficiency increased by 4.2% using a tool with all the new design features (i.e. hollow, fluted and thermally insulated) compared to the conventional tool for aluminium welding. To assess the benefits of the new tool design on steel FSW, a finite element numerical simulation study was undertaken. In this case, the simulation results yielded a welding thermal efficiency increase of 10–15% using a thermally coated tool, thereby offering potential productivity gains.
GouldEJ, FengZ.Heat flow model for friction stir welding of aluminum alloys. J Mater Process Manuf Sci. 1998; 7(2):185–194. doi: 10.1106/648R-2CNE-2PD0-45L6
3.
DickersonT, ShiQ, ShercliffH.Heat Flow into Friction Stir Welding Tools. 4th International Symposium on Friction Stir Welding; 2003May 14–16; Park City, Utah, USA.
4.
SongM, KovacevicR.Heat transfer modelling for both workpiece and tool in the friction stir welding process: a coupled model. Proceedings of the institution of mechanical engineers. Part B: Journal of Engineering Manufacture. 2004; 218(1):17–33.
5.
ZhangZ, ZhangHW.Numerical studies of preheating time effect on temperature and material behaviours in friction stir welding process. Sci Technol Weld Joining. 2007; 12(5):436–448. doi: 10.1179/174329307X214386
6.
HwangYM, KangZW, ChiouYC.Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys. Int J Mach Tools Manuf. 2008; 48(7):778–787. doi: 10.1016/j.ijmachtools.2007.12.003
7.
YaduwanshiDK, BagS, PalS.Heat transfer analyses in friction stir welding of aluminium alloy. Proceedings of the institution of mechanical engineers. Part B: Journal of Engineering Manufacture. 2015; 229(10):1722–1733.
8.
XiaoY, ZhanH, GuY, Modeling heat transfer during friction stir welding using a meshless particle method. Int J Heat Mass Transf. 2017; 104:288–300. doi: 10.1016/j.ijheatmasstransfer.2016.08.047
9.
ShiL, WuCS.Transient model of heat transfer and material flow at different stages of friction stir welding process. J Manuf Process. 2017; 25:323–339. doi: 10.1016/j.jmapro.2016.11.008
10.
ChaoYJ, QiX, TangW.Heat transfer in friction stir welding-experimental and numerical studies. J Manuf Sci Eng. 2003; 125(1):138–145. doi: 10.1115/1.1537741
11.
KhandkarMZH, KhanJA, ReynoldsAP.Prediction of temperature distribution and thermal history during friction stir welding: input torque based model. Sci Technol Weld Joining. 2003; 8(3):165–174. doi: 10.1179/136217103225010943
12.
SimarA, PardoenT, De MeesterB.Effect of rotational material flow on temperature distribution in friction stir welds. Sci Technol Weld Joining. 2007; 12(4):324–333. doi: 10.1179/174329307X197584
13.
FengT, ZhangX.Three dimensional model for heat transfer and plastic flow of friction stir welding. Trans China Weld Institution. 2013; 34(7):105–108.
LienertTJ, StellwagWLJr, GrimmettBB, Friction stir welding studies on mild steel. Weld J. 2003; 82(1):1–S. doi: 10.1179/136217103225008847
16.
ZhuKX, ChaoYJ.Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel. J Mater Process Technol. 2004; 146(2):263–272. doi: 10.1016/j.jmatprotec.2003.10.025
17.
Reza-E-RabbyM, TangW, ReynoldsAP.Effects of thread interruptions on tool pins in friction stir welding of AA6061. Sci Technol Weld Joining. 2018 Feb 17; 23(2):114–124. doi: 10.1080/13621718.2017.1341363
18.
DourandishS, MousavizadeSM, EzatpourHR, Microstructure, mechanical properties and failure behaviour of protrusion friction stir spot welded 2024 aluminium alloy sheets. Sci Technol Weld Joining. 2018 May 19; 23(4):295–307. doi: 10.1080/13621718.2017.1386759
19.
ShinHS, de LeonM.Weldability assessment of friction stir spot welded lightweight alloys using pin and pinless tools. Sci Technol Weld Joining. 2016 Feb 17; 21(2):99–105. doi: 10.1179/1362171815Y.0000000070
20.
LiH, QinW, LiuD, Design of friction stir welding tools reducing heat flow into spindle. Int J Adv Manuf Technol. 2018; 94(5-8):1925–1932. doi: 10.1007/s00170-017-0985-7
21.
DavisJR.ASM handbook. 1. Properties and selection: irons, steels, and high-performance alloys. Novelty: ASM International; 1990.
22.
CRC handbook of chemistry and physics [M]. CRC Press, 2014.
23.
LiuK, LiXP, RahmanM, CBN tool wear in ductile cutting of tungsten carbide. Wear. 2003; 255(7–12):1344–1351. doi: 10.1016/S0043-1648(03)00061-9
JasthiKB, ArbegastJW, HowardM.SThermal expansion coefficient and mechanical properties of friction stir welded invar (Fe-36% Ni). J Mater Eng Perform. 2009; 18(7):925–934. doi: 10.1007/s11665-008-9320-7
26.
SpriggsE.G13.5 properties of diamond and cubic boron nitride[M]. In: Beiss P, Ruthardt R, Warlimont H, editors. Powder metallurgy data. Refractory, hard and intermetallic materials. Berlin Heidelberg: Springer; 2002. p. 118–139.
