Effects of oscillating diameter (D) and frequency (f) on weld surface and cross-sectional morphologies were investigated in laser welding of AA6061 aluminium alloy with circular beam oscillation. Weld surface was mainly characterised by straight line shape when f > 10 Hz. Weld cross-section transformed from slender nail to irregular shape, dumpy nail, rectangle and crescent shape in sequence with the increase of D and f. A modified model considering material thermal properties was developed to predict the surface feature, especially whether the weld totally overlapped or not. A new normalised enthalpy was proposed to predict the keyhole mode of laser oscillating welding by considering materials thermal properties and remelting effect, which was suitable to explain the formation of cross-sectional morphology.
El-batahgyA, KutsunaM.Laser beam welding of AA5052, AA5083, and AA6061 aluminium alloys. Adv Mater Sci Eng. 2009; 2009:1–9. doi: 10.1155/2009/974182
4.
XieJ.Dual beam laser welding. Weld J. 2002; 81:223–230.
5.
XieJ.Weld morphology and thermal modeling in dual-beam laser welding. Weld J. 2002; 81:283–290.
6.
GruppM, SeefeldT, VollertsenF.Laser beam welding with scanner. Proceeding of the second international WLT-conference on lasers in manufacturing, Munich, GER 2003.
7.
BerendO, HaferkampH, MeierO, High-frequency beam oscillating to increase the process stability during laser welding with high melt pool dynamics. Proceedings of the 24th International Congress on Applications of Laser & Electro-Optics, Miami, Florida; 2005, pp. 1032–1041.
8.
KraetzschM, StandfussJ, KlotzbachA, Laser beam welding with high-frequency beam oscillation: welding of dissimilar materials with brilliant fiber lasers. Phys Procedia. 2011; 12(Part A):142–149. doi: 10.1016/j.phpro.2011.03.018
9.
MiyagiM, ZhangX, KawahitoY, Surface void suppression for pure copper by high-speed laser scanner welding. J Mater Process Technol. 2017; 240:52–59. doi: 10.1016/j.jmatprotec.2016.09.008
10.
HaoKD, LiG, GaoM, Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel. J Mater Process Technol. 2015; 225:77–83. doi: 10.1016/j.jmatprotec.2015.05.021
11.
YamazakiY, AbeY, HiokiY, Fundamental study of narrow-gap welding with oscillation laser beam. Weld Int. 2016; 30(9):699–707. doi: 10.1080/09507116.2016.1142193
12.
GrünenwaldS, UntA, SalminenA.Investigation of the influence of welding parameters on the weld geometry when welding structural steel with oscillated high-power laser beam. Procedia CIRP. 2018; 74:461–465. doi: 10.1016/j.procir.2018.08.150
13.
MartukanitzR, StolI, TresslerJF, Development of the laser stir welding process for aluminum laser beam welding. Proceedings of the 24th International Congress on Applications of Laser & Electro-Optics, Miami, Florida; 2005, pp. 712–718.
14.
WangL, GaoM, ZhangC, Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy. Mater Des. 2016; 108:707–717. doi: 10.1016/j.matdes.2016.07.053
15.
MahrleA, BeyerE.Modeling and simulation of the energy deposition in laser beam welding with oscillatory beam deflection. Proceedings of the 26th International Congress on Applications of Lasers & Electro-Optics (ICALEO), Orlando, Florida; 2007, pp. 714–723.
16.
RaiR, KellySM, MartukanitzRP, A convective heat-transfer model for partial and full penetration keyhole mode laser welding of a structural steel. Metall Mater Trans A. 2008; 39(1):98–112. doi: 10.1007/s11661-007-9400-6
17.
SchweierM, HeinsJF, HauboldMW, Spatter formation in laser welding with beam oscillation. Phys Procedia. 2013; 41:20–30. doi: 10.1016/j.phpro.2013.03.047
18.
MillsKC.Recommended values of thermophysical properties for selected Commercial alloys. Cambridge: Woodhead Publishing; 2002.
19.
ColegroveP, SimiandPE, VarugheseA, Evaluation of a drilling model approach to represent laser spot microwelding. Trends in Welding Research: Proceedings of the 8th International Conference, Pine Mountain, GA; 2009.
20.
SeidgazovRD.Thermocapillary mechanism of melt displacement during keyhole formation by the laser beam. J Phys D Appl Phys. 2009; 42(17):175501. doi: 10.1088/0022-3727/42/17/175501
21.
HannDB, IammiJ, FolkesJ.A simple methodology for predicting laser-weld properties from material and laser parameters. J Phys D Appl Phys. 2011; 44:445401. doi: 10.1088/0022-3727/44/44/445401
22.
KingWE, BarthHD, CastilloVM, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol. 2014; 214:2915–2925. doi: 10.1016/j.jmatprotec.2014.06.005
