The scope of this study is the real-time monitoring and evaluation of the healing process using novel testing procedures and non-destructive evaluation techniques. In this work, the healing approach that has been followed is that of the intrinsic Diels–Alder (DA) and retro-DA mechanism. Two polymers were used as adhesives in single lap-joint specimens that were subjected to static tensile loading. The healed specimens were subjected to the same testing procedure as the one before the first failure and the healing efficiency was assessed by the correlation of the experimental results prior and after healing. Acoustic emission and infrared thermography were employed with the destructive tests so as to monitor changes in the acoustic and the thermal profile between the virgin and the ‘healed’ specimen.
BekasD. G., TsirkaK., BaltzisD. and PaipetisA. S.: ‘Self-healing materials: a review of advances in materials, evaluation, characterization and monitoring techniques’, Compos. Part B, 2016, 87, 92–119.
2.
PostiglioneG., TurriS. and LeviM.: ‘Effect of the plasticizer on the self-healing properties of a polymer coating based on the thermoreversible Diels–Alder reaction’, Prog. Org. Coat., 2015, 78, 526–531. doi: 10.1016/j.porgcoat.2014.05.022
3.
ParkJ. S., DarlingtonT., StarrA. F., TakahashiK., RiendeauJ. and Thomas HahnH.: ‘Multiple healing effect of thermally activated self-healing composites based on Diels–Alder reaction’, Compos. Sci. Technol., 2010, 70, (15), 2154–2159. doi: 10.1016/j.compscitech.2010.08.017
4.
KötteritzschJ., StumpfS., HoeppenerS., VitzJ., HagerM. D. and SchubertU. S.: ‘One-component intrinsic self-healing coatings based on reversible crosslinking by Diels–Alder cycloadditions’, Macromol. Chem. Phys., 2013, 214, (14), 1636–1649. doi: 10.1002/macp.201200712
5.
ZhangW., DuchetJ. and GerardJ. F.: ‘Self-healable interfaces based on thermo-reversible Diels-Alder reactions in carbon fiber reinforced composites’, J. Colloid Interf. Sci., 2014, 430, 61–68. doi: 10.1016/j.jcis.2014.05.007
6.
AxJ. and WenzG.: ‘Thermoreversible networks by Diels–Alder reaction of cellulose furoates with bismaleimides’, Macromol. Chem. Phys., 2012, 213, (2), 182–186. doi: 10.1002/macp.201100410
7.
BrancartJ., ScheltjensG., MuselleT., Van MeleB., TerrynH. and Van AsscheG.: ‘Atomic force microscopy-based study of self-healing coatings based on reversible polymer network systems’, J. Intel. Mat. Syst. Str., 2012, 25, (1), 40–46. doi: 10.1177/1045389X12457100
8.
AdzimaB. J., KloxinC. J. and BowmanC. N.: ‘Externally triggered healing of a thermoreversible covalent network via self-limited hysteresis heating’, Adv. Mater., 2010, 22, (25), 2784–2787. doi: 10.1002/adma.200904138
9.
ChenX., DamM. A., OnoK., MalA., ShenH., NuttS. R., SheranK. and WudlF.: ‘A thermally re-mendable cross-linked polymeric material’, Science, 2002, 295, (5560), 1698–1702. doi: 10.1126/science.1065879
ToncelliC., De ReusD. C., PicchioniF. and BroekhuisA. A.: ‘Properties of reversible Diels–Alder furan/maleimide polymer networks as function of crosslink density’, Macromol. Chem. Phys., 2012, 213, (2), 157–165. doi: 10.1002/macp.201100405
12.
RiveroG., NguyenL.-T. T., HillewaereX. K. D. and Du PrezF. E.: ‘One-pot thermo-remendable shape memory polyurethanes’, Macromolecules, 2014, 47, (6), 2010–2018. doi: 10.1021/ma402471c
13.
KhoeeS. and KachoeiZ.: ‘Design and development of novel reactive amine nanocontainers for a self-healing epoxy adhesive: self-repairing investigation using the lap shear test’, RSC Adv., 2015, 5, (27), 21023–21032. doi: 10.1039/C4RA16344C
14.
EverittD. T., LuterbacherR., CoopeT. S., TraskR. S., WassD. F. and BondI. P.: ‘Optimisation of epoxy blends for use in extrinsic self-healing fibre-reinforced composites’, Polymer, 2015, 69, 283–292. doi: 10.1016/j.polymer.2015.02.047
15.
HuangG. C., LeeJ. K. and KesslerM. R.: ‘Evaluation of norbornene-based adhesives to amine-cured epoxy for self-healing applications’, Macromol. Mater. Eng., 2011, 296, (10), 965–972. doi: 10.1002/mame.201100016
CarpinteriA., CardoneF. and LacidognaG.: ‘Energy emissions from failure phenomena: mechanical, electromagnetic, nuclear’, Exp. Mech., 2010, 50, 1235–1244.
18.
KaterelosD. T. G., PaipetisA., LoutasT., SotiriadisG., KostopoulosV. and OginS. L.: ‘In situdamage monitoring of cross-ply laminates using acoustic emission’, Plast. Rubber Compos., 2009, 38, (6), 229–234. doi: 10.1179/174328909X435348
19.
GrammatikosS. A., KordatosE. Z., MatikasT. E. and PaipetisA. S.: ‘Real-time debonding monitoring of composite repaired materials via electrical, acoustic, and thermographic methods’, J. Mater. Eng. Perform., 2013, 23, (1), 169–180. doi: 10.1007/s11665-013-0672-2
20.
MaldagueX. P.: ‘Introduction to NDT by active infrared thermography’, Mater. Eval., 2002, 60, (9), 1060–1073.
21.
KordatosE. Z., ExarchosD. A., DassiosK. G. and MatikasT. E.: Thermo-electrical lockin thermography for characterization of subsurface defects’, Proc. SPIE, 2014, 9062, 90620G.
22.
GrammatikosS. A., KordatosE. Z., BarkoulaN. M., MatikasT. E. and PaipetisA. S.: ‘Innovative non-destructive evaluation and damage characterisation of composite aerostructures using thermography’, Plast. Rubber Compos., 2011, 40, (6–7), 342–348. doi: 10.1179/1743289810Y.0000000013
23.
ChowdhuryR. A., HosurM. V., NuruddinM., Tcherbi-NartehA., KumarA., BodduV. and JeelaniS.: ‘Self-healing epoxy composites: preparation, characterization and healing performance’, J. Mater. Res. Technol., 2015, 4, (1), 33–43. doi: 10.1016/j.jmrt.2014.10.016
24.
LiuY.-L. and HsiehC.-Y.: ‘Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds’, J. Polym. Sci. Pol. Chem., 2006, 44, 905–914. doi: 10.1002/pola.21184
25.
AstmI.: ‘D 1002 – Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal); 2001.
26.
AstmI.: ‘D 3933 – Standard guide for preparation of aluminum surfaces for structural adhesives bonding; 1998.
27.
AggelisD. G., BarkoulaN. M., MatikasT. E. and PaipetisA. S.: ‘Acoustic structural health monitoring of composite materials: damage identification and evaluation in cross ply laminates using acoustic emission and ultrasonic’, Compos. Sci. Technol., 2012, 72, (10), 1127–1133. doi: 10.1016/j.compscitech.2011.10.011
28.
N. K. Paschos, D. G. Aggelis, N. M. Barkoula, A. S. Paipetis, T. E. Matikas and A. D. Georgoulis: ‘Rupture of anterior cruciate ligament monitored by acoustic emission’, J. Acoust. Soc. Am., 2011, 129, (6), 217–222.
29.
AggelisD. G., SouliotiD. V., SapouridisN., BarkoulaN. M., PaipetisA. S. and MatikasT. E.: ‘Acoustic emission characterization of the fracture process in fibre reinforced concrete’, Constr. Build. Mater., 2011, 25, (11), 4126–4131.
