A sizing formulation, containing compatible and incompatible silane coupling agents with epoxy resin in conjunction with nanoscale colloidal silica, was used to modify the surface of glass fabric. The modified glass fabric/epoxy resin composite panels were fabricated and characterised by flexural test, Charpy impact test and scanning electron microscope (SEM). By combining nano silica with silane blend in the fabric sizing, more energy was consumed under bending and impacting, which resulted in an improvement of the toughness in composites. The flexural strength, bending stain and Charpy impact strength of the epoxy composite/glass fabric treated with 1 wt-% nano silica and silane blend were ∼42, ∼22 and 35%, respectively, higher than those of silane blend coated glass fabric-reinforced composites (without nano silica). Furthermore, the change of the brittle fracture of the composite into ductile fracture was investigated by SEM micrographs. A possible toughening mechanism was also proposed.
DaryadelS, RayC, PandyaT, Energy absorption of pultruded hybrid GlassGraphite epoxy composites under high strain-rate SHPB compression loading. Mater Sci Appl. 2015;6:511–518.
2.
KimH, KimS, KimD, Effect of silane coupling agent on the flexural property of glass fiber reinforced composite film. J Mater Sci Chem Eng. 2014;2:38–42.
3.
LiJ.Tribological properties of polyimide composites filled with glass fibre and graphite. Plast, Rubber Comp. 2009;38(6):248–252. doi: 10.1179/174328909X435366
4.
ZabihiO, KhodabandehA, GhasemlouS.Investigation of mechanical properties and cure behavior of DGEBA/nano-Fe2O3 with polyamine dendrimer. Polym Degrad Stab. 2012;97(9):1730–1736. doi: 10.1016/j.polymdegradstab.2012.06.013
5.
LuoW, WangX, HuangR, Interface enhancement of glass fiber/unsaturated polyester resin composites with nano-silica treated using silane coupling agent. Wuhan Univ J Nat Sci. 2014;19(1):34–40. doi: 10.1007/s11859-014-0975-7
6.
DevendraK, RangaswamyT.Strength characterization of E-glass fiber reinforced epoxy composites with filler materials. J Miner Mater Charact Eng. 2013;1(6):353–357.
7.
ZabihiO.Modeling of phenomenological mechanisms during thermal formation and degradation of an epoxy-based nanocomposite. Thermochim Acta. 2012;543:239–245. doi: 10.1016/j.tca.2012.05.032
8.
PatelH, RenG, HoggPJ, Hemp fibre as alternative to glass fibre in sheet moulding compound. Part 2–impact properties. Plast, Rubber Compos. 2015;44(7):291–298. doi: 10.1179/1743289815Y.0000000030
9.
KimJK, MaiYW.Engineered interfaces in fibre reinforced composites. Kidlington: Elsevier;2006.
10.
ZabihiO.Preparation and characterization of toughened composites of epoxy/poly(3,4-ethylenedioxythiophene) nanotube: thermal, mechanical and electrical properties. Compos B Eng. 2013;45(1):1480–1485. doi: 10.1016/j.compositesb.2012.09.029
11.
EtcheverryM, BarbosaSE.Glass fiber reinforced polypropylene mechanical properties enhancement by adhesion improvement. Mater (Basel). 2012;5:1084–1113. doi: 10.3390/ma5061084
12.
MallickPK.Fiber reinforced composites: materials, manufacturing, and design. Boca Raton: CRC Press, Taylor & Francis Group, LLC;2008.
13.
ZouD, LiX, LongS, Effect of compatibiliser on rheological behaviour of straw fibre/low density polyethylene composites. Plast, Rubber Compo. 2015;44(6):238–244. doi: 10.1179/1743289815Y.0000000022
14.
DeyM, DeitzelJM, GillespieJWJr., Influence of sizing formulations on glass/epoxy interphase properties. Compos A Appl Sci Manuf. 2014;63: 59–67. doi: 10.1016/j.compositesa.2014.04.006
15.
YangL, ThomasonJL.Effect of silane coupling agent on mechanical performance of glass fibre. J Mater Sci. 2013;48:1947–1954. doi: 10.1007/s10853-012-6960-7
16.
MasciaL, DhillonJ, HarperJ.The influence of fibre/matrix interlayers based on silane functionalised EPDM and UHMWPE on the mechanical properties of glass fibre/epoxy composites. Plast Rubber Compos Process Appl. 1993;19(4):221–226.
17.
AhmadiM, MasoomiM, SafiS.Mechanical property characterization of carbon nanofiber/epoxy nanocomposites reinforced by GMA-grafted UHMWPE fibers. ComposB Eng. 2015;83:43–49. doi: 10.1016/j.compositesb.2015.08.006
18.
ManjunathM, RenukappaNM, SureshaB.Influence of micro and nanofillers on mechanical properties of pultruded unidirectional glass fiber reinforced epoxy composite systems. J Compos Mater. 2015;50(8):1109–1121. doi: 10.1177/0021998315588623
19.
TsaiJL, HuangBH, ChengYL.Enhancing fracture toughness of glass/epoxy composites for wind blades using silica nanoparticles and rubber particles. Procedia Eng. 2011;14:1982–1987. doi: 10.1016/j.proeng.2011.07.249
20.
SeverK, SarikanatM, SekiY, Concentration effect of γ-glycidoxypropyltrimethoxysilane on the mechanical properties of glass fiber-epoxy composites. Polym Compos. 2009;30(9):1251–1257. doi: 10.1002/pc.20686
21.
GaoX, JensenRE, McKnightSH, Effect of colloidal silica on the strength and energy absorption of glass fiber/epoxy interphases. Compos A Appl Sci Manuf. 2011;42(11):1738–1747. doi: 10.1016/j.compositesa.2011.07.029
22.
ZhuangR-C, BurghardtT, PlonkaR, Affecting glass fibre surfaces and composite properties by two stage sizing application. Express Polym Lett. 2010;4(2):798–808. doi: 10.3144/expresspolymlett.2010.96
23.
JensenRE, McKnightSH.Inorganic–organic fiber sizings for enhanced energy absorption in glass fiber-reinforced composites intended for structural applications. Compos Sci Technol. 2006;66:509–521. doi: 10.1016/j.compscitech.2005.06.004
24.
ChouS, LinLS.Effect of colloidal silica on adhesion of glass fiber to polypropylene. Polym Polym Compos. 2001;9:175–183.
25.
SafiS, ZadhoushA, MasoomiM.Effects of chemical surface pretreatment on tensile properties of a single glass fiber and the glass fiber reinforced epoxy composite. Polym Compos. 2016;37(1):91–100. doi: 10.1002/pc.23158
26.
GaoX, JensenR, LiW, Effect of fiber surface texture created from silane blends on the strength and energy absorption of the glas fiber/epoxy interphase. J Compos Mater. 2008;42(5):513–534. doi: 10.1177/0021998307086203
27.
TanogluM, ZiaeeS, McknightSH, Investigation of properties of fiber/matrix interphase formed due to the glass fiber sizings. J Mater Sci. 2001;36(12):3041–3053. doi: 10.1023/A:1017979126129
28.
RobinetteE, BujandaA, DemareeJ, Advanced concepts in nanotexturing of solid surfaces for composite applications. Aberdeen: DTIC Document; 2006.
29.
ZhaoN, RödelH, HerzbergC, Stitched glass/PP composite. Part I: tensile and impact properties. Compos A Appl Sci Manuf. 2009;40(5):635–643. doi: 10.1016/j.compositesa.2009.02.019
30.
DongC, DaviesIJ.Flexural properties of glass and carbon fiber reinforced epoxy hybrid composites. Proc Inst Mech Eng L J Mater Des Appl. 2013;227(4):308–317.
31.
SawpanMA, PickeringKL, FernyhoughA.Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites. Compos A Appl Sci Manuf. 2011;42(3):310–319. doi: 10.1016/j.compositesa.2010.12.004
32.
ReidS, ZhouG.Impact behaviour of fibre-reinforced composite materials and structures. England: Woodhead Publishing Limited;2000.
33.
LaghaeiM, SadeghiM, GhaleiB, The role of compatibility between polymeric matrix and silane coupling agents on the performance of mixed matrix membranes: polyethersulfone/MCM-41. J Membr Sci. 2016;513:20–32. doi: 10.1016/j.memsci.2016.04.039
34.
PazhoohHN, BagheriR, AdlooA.Fabrication of semi-conductive natural rubber nanocomposites with low copper nanoparticle contents. Polymer (Guildf). 2017;108:135–145. doi: 10.1016/j.polymer.2016.11.059
