The present work reported a strategy involving the preparation of polypropylene (PP)/organic montmorillonite (OMMT)/poly(ethylene-co-octene) (POE), POE grafted with maleic anhydride (POE-g-MAH), and POE grafted with MAH and 2-hydroxy ethyl acrylate (POE-g-MAH/HEA) nanocomposites. The results of FTIR, X-ray diffraction, transmission electron microscopy, and SEM analyses show that the compatibilisation effect of POE-g-MAH/HEA was better than that of POE-g-MAH and pure POE, which can greatly increase intercalation and exfoliation for the clays. Correspondingly, the compatibiliser can significantly improve the notched impact strength and thermal stability of PP/OMMT nanocomposites and simultaneously effectively inhibit the decrease in the tensile strength. However, the heterogeneous nucleation of the clay nanosheets on PP was obviously inhibited by the presence of the POE-g-MAH/HEA.
FitaroniLB, de LimaJA, CruzSA.Thermal stability of polypropylene-montmorillonite clay nanocomposites: limitation of the thermogravimetric analysis. Polym Degrad Stabil. 2015;111:102–108. doi: 10.1016/j.polymdegradstab.2014.10.016
4.
TiwariRR, PaulDR.Polypropylene-elastomer (TPO) nanocomposites: 2. room temperature izod impact strength and tensile properties. Polymer (Guildf). 2011;52:5595–5605. doi: 10.1016/j.polymer.2011.10.002
5.
PappalardoS, RussoP, AciernoD, The synergistic effect of organically modified sepiolite in intumescent flame retardant polypropylene. Eur Polym J. 2016;76:196–207. doi: 10.1016/j.eurpolymj.2016.01.041
6.
KotalM, BhowmickAK.Polymer nanocomposites from modified clays: recent advances and challenges. Prog Polym Sci. 2015;51:127–187. doi: 10.1016/j.progpolymsci.2015.10.001
7.
ChandramouleeswaranS, MhaskeST.Enhanced clay dispersion in polypropylene by the modification of clay with poly (oxypropylene) diamine. J Sci Technol. 2008;29:1338–1342.
8.
PengP, YangZ, WuM, Effect of montmorillonoite modification and maleic anhydride-grafted polypropylene on the microstructure and mechanical properties of polypropylene/montmorillonoite nanocomposites. J Appl Polym Sci. 2013;130:3952–3960.
9.
XuY, GuoZ, FangZ, Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene. J Appl Polym Sci. 2013;128:283–291. doi: 10.1002/app.38178
10.
LibórioP, OliveiraVA, MarquesMDFV.Preparation of nanocomposites of polypropylene/alkylaluminum-modified clay: effect of polymer grade, amount of clay, and screw speed. Polym-Plast Technol. 2017;56:123–130. doi: 10.1080/03602559.2016.1185617
11.
ZhuB, DongW, WangJ, Modification of polypropylene via the free-radical grafting ternary monomer in water suspension systems. J Appl Polym Sci. 2012;126:1844–1851. doi: 10.1002/app.36653
12.
ZhuB, WangJ, YuC.Structure and properties of polypropylene-based nanocomposite materials with montmorillonite. Polym Mater Sci Eng (China). 2014;30:58–61.
13.
BhattacharyaA, MondalS, BandyopadhyayA.Maleic anhydride grafted atactic polypropylene as exciting new compatibilizer for poly (ethylene-co-octene) organically modified clay nanocomposites: investigations on mechanical and rheological properties. Ind Eng Chem Res. 2013;52:14143–14153. doi: 10.1021/ie400649p
14.
CoiaiS, AugierS, PinzinoC, Control of degradation of polypropylene during its radical functionalisation with furan and thiophene derivatives. Polym Degrad Stabil. 2010;95:298–305. doi: 10.1016/j.polymdegradstab.2009.11.014
15.
ZhuY, LiangC, BoY, Compatibilization of polypropylene/recycled polyethylene terephthalate blends with maleic anhydride grafted polypropylene in the presence of diallyl phthalate. J Polym Res. 2015;22:35–46. doi: 10.1007/s10965-014-0591-4
16.
YeY, QianJ, XuY.Ultrasonic induced grafting of maleic anhydride onto polypropylene in melt state. J Polym Res. 2011;18:2023–2031. doi: 10.1007/s10965-011-9611-9
17.
ZhuL, XuX, WangF, Characterisation of the thickness of transition layer and its relation to mechanical properties of polypropylene/poly(ethylene-co-octene) blends. J Mat Sci Eng A – Struct. 2008;494:449–455. doi: 10.1016/j.msea.2008.04.053
18.
TaoG, LiaoX, FangJ, Synergistic toughening effect of different elastomers on polypropylene. Polym Mater Sci Eng (China). 2013;29:55–59.
19.
LaiSM, ChenWC, ZhuXS.Melt mixed compatibilized polypropylene/clay nanocomposites: part 1-the effect of compatibilizers on optical transmittance and mechanical properties. Compos Part – Appl S. 2009;40:754–765. doi: 10.1016/j.compositesa.2009.03.006
20.
LiuSP, LiangCW.Preparation and mechanical properties of polypropylene/montmorillonite nanocomposites-after grafted with hard/soft grafting agen. Int Commun Heat Mass. 2011;38:434–441. doi: 10.1016/j.icheatmasstransfer.2010.12.030
21.
LiuB, ShangguanY, SongY, Influences of compatibilizers on rheology and mechanical properties of propylene random copolymer/styrene-ethylene-butylene-styrene block copolymer/organic-montmorillonite nanocomposites. J Appl Polym Sci. 2013;129:973–982. doi: 10.1002/app.38637
22.
MuñozPAR, BettiniSHP.Montmorillonite as support for peroxide in the melt grafting of maleic anhydride onto polypropylene. J Appl Polym Sci. 2016;133:44134–44142. doi: 10.1002/app.44134
23.
SunH, ZhangJ, LiL.Surface modification of natural Na-montmorillonite in alkane solvents using a Quaternary ammonium surfactant. Colloids Surf A. 2013;426:26–32. doi: 10.1016/j.colsurfa.2013.03.008
24.
SarierN, OnderE, ErsoyS.The modification of Na-montmorillonite by salts of fatty acids: an easy intercalation process. Colloid Surface A. 2010;371:40–49. doi: 10.1016/j.colsurfa.2010.08.061
25.
HejaziI, SharifF, GarmabiH.Effect of material and processing parameters on mechanical properties of polypropylene/ethylene-propylene-diene-monomer/clay nanocomposites. Mater Design. 2011;32:3803–3809. doi: 10.1016/j.matdes.2011.03.017
26.
DelvaL, RagaertK, DegrieckJ, The effect of multiple extrusions on the properties of montmorillonite filled polypropylene. Polymers (Basel). 2014;6:2912–2927. doi: 10.3390/polym6122912
27.
HongCK, KimMJ, OhSH.Effects of polypropylene-g-(maleic anhydride/styrene) compatibilizer on mechanical and rheological properties of polypropylene/clay nanocomposites. Ind Eng Chem. 2008;14:236–242. doi: 10.1016/j.jiec.2007.11.001
28.
SuFH, HuangHX, ZhaoY.Microstructure and mechanical properties of polypropylene/poly (ethylene-co-octene copolymer)/clay ternary nanocomposites prepared by melt blending using supercritical carbon dioxide as a processing aid. Compos Part B – Eng. 2011;42:421–428. doi: 10.1016/j.compositesb.2010.12.005
29.
LiuSP, YingJR, ZhouXP, Dispersion, thermal and mechanical properties of polypropylene/magnesium hydroxide nanocomposites compatibilized by SEBS-g-MA. Compos Sci Technol. 2009;69:1873–1879. doi: 10.1016/j.compscitech.2009.04.004
30.
LiuBB, ShangguanYG, ZhengQ.Toughening of ethylene-propylene random copolymer/clay nanocomposites: comparison of different compatibilizers. Chinese J Polym Sci. 2012;30:853–864. doi: 10.1007/s10118-012-1185-4
31.
MohanTP, KannyK.Influence of nanoclay on rheological and mechanical properties of short glass fiber-reinforced polypropylene composites. J Reinf Plast Comp. 2011;30:152–160. doi: 10.1177/0731684410391509
32.
LimSR, ChowWS.Impact, thermal, and morphological properties of functionalized rubber toughened-poly (ethylene terephthalate) nanocomposites. J Appl Polym Sci. 2012;123:3173–3181. doi: 10.1002/app.34980
33.
SunT, DongX, ChenF, Preferential distribution of clay layers in iPP/OMMT/PEOc ternary nanocomposites. Polymer (Guildf). 2012;53:1054–1057. doi: 10.1016/j.polymer.2012.01.023
34.
SunT, DongX, DuK, Structural and thermal stabilization of isotactic polypropylene/organo-montmorillonite/poly (ethylene-co-octene) nanocomposites by an elastomer component. Polymer (Guildf). 2008;49:588–598. doi: 10.1016/j.polymer.2007.11.033
35.
WangTN, QianXH, GranickMS, The effects of reprocessing cycles on the structure and properties of polystyrene/Cloisite15A nanocomposites. Polym Degrad Stabil. 2011;96:1064–1073. doi: 10.1016/j.polymdegradstab.2011.03.015
36.
Bagheri-KazemabadS, FoxD, ChenY, Morphology, rheology and mechanical properties of polypropylene/ethylene–octene copolymer/clay nanocomposites: effects of the compatibilizer. Compos Sci Technol. 2012;72:1697–1704. doi: 10.1016/j.compscitech.2012.06.007
37.
ZhaoT, ZhangX, WuH, Rheology, morphology, and mechanical properties of HMSPP/POE blends and its alternate layered foam. J Appl Polym Sci. 2015;132:41339–41345.
38.
ModestiM, LorenzettiA, BonD, Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocomposites. Polymer (Guildf). 2005;46:10237–10245. doi: 10.1016/j.polymer.2005.08.035
