Polypropylene (PP) as a thermoplastic polymer has been foamed using batch foaming process. CO2 is used as the blowing agent of the foaming. Ferrous oxide nanoparticles (nano Fe2O3) are also added as reinforcement. Effect of different parameters including nanoparticle weight percentage, foaming temperature and time on the structural properties of PP/nano Fe2O3 nanocomposites is investigated using Taguchi approach. Scanning electron microscope results depict that an appropriate microcellular structure is obtained with the cell density of 109 cells/cm3 and almost 1 μm of cell size. Analysis of variance results indicated that foaming temperature is the most significant parameter on the structural properties. Cell density and expansion ratio are decreased by increasing foaming temperature. This phenomenon could be due to the reducing melt strength of polymer/gas mixture. It was also inferred that adding 2 wt% of nanoparticles leads to 80% improvement in cell density while cell size and expansion ratio was decreased.
YetkinSH, UnalH, MimarogluA, Influence of process parameters on the mechanical and foaming properties of PP polymer and PP/TALC/EPDM composites. Polym Plast Technol Eng. 2013;52(5):433–439. doi: 10.1080/03602559.2012.748802
2.
WangK, PangY, WuF, Cell nucleation in dominating formation of bimodal cell structure in polypropylene/polystyrene blend foams prepared via continuous extrusion with supercritical CO2. J Supercrit Fluids. 2016;110:65–74. doi: 10.1016/j.supflu.2015.12.012
3.
FanC, WanC, GaoF, Extrusion foaming of poly (ethylene terephthalate) with carbon dioxide based on rheology analysis. J Cell Plast. 2016;52(3):277–298. doi: 10.1177/0021955X14566085
KumarBB, DoddamaniM, ZeltmannSE, Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine. Mater Des. 2016;92:414–423. doi: 10.1016/j.matdes.2015.12.052
6.
MohammadianZ, RezaeiM, AzdastT.Microstructure, physical, and mechanical properties of LDPE/UHMWPE blend foams: an experimental design methodology. J Thermoplast Compos Mater. 2016;29(9):1229–1260. doi: 10.1177/0892705714563119
7.
CraveiroR, MartinsM, SantosGB, Starch-based polymer–IL composites formed by compression moulding and supercritical fluid foaming for self-supported conductive materials. RSC Adv. 2014;4(33):17161–17170. doi: 10.1039/c4ra01424c
8.
NaguibHE, ParkCB, ReicheltN.Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams. J Appl Polym Sci. 2004;91(4):2661–2668. doi: 10.1002/app.13448
9.
GrignardB, ThomassinJM, GennenS, CO2-blown microcellular non-isocyanate polyurethane (NIPU) foams: from bio- and CO2-sourced monomers to potentially thermal insulating materials. Green Chem. 2016;18(7):2206–2215. doi: 10.1039/C5GC02723C
10.
TsivintzelisI, SanxaridouG, PavlidouE, Foaming of polymers with supercritical fluids: a thermodynamic investigation. J Supercrit Fluids. 2016;110:240–250. doi: 10.1016/j.supflu.2015.11.025
11.
HuangHX, WangJK, SunXH.Improving of cell structure of microcellular foams based on polypropylene/high-density polyethylene blends. J Cell Plast. 2008;44(1):69–85. doi: 10.1177/0021955X07086082
12.
BeydokhtiKK, BehraveshAH, AzdastT.An experimental study on mechanical and microstructural properties of microcellular foams of ABS composites. Iran Polym J. 2006;15(7):555–567.
YehJM, ChangKC, PengCW, Effect of dispersion capability of organoclay on cellular structure and physical properties of PMMA/clay nanocomposite foams. Mater Chem Phys. 2009;115(2):744–750. doi: 10.1016/j.matchemphys.2009.02.017
15.
UrbanczykL, CalbergC, DetrembleurC, Batch foaming of SAN/clay nanocomposites with scCO2: a very tunable way of controlling the cellular morphology. Polymer (Guildf). 2010;51(15):3520–3531. doi: 10.1016/j.polymer.2010.05.037
16.
AzeragB, AzdastT, DoniaviA, Structural properties of batch foamed acrylonitrile butadiene styrene/nanoclay nanocomposites. Int JMech Mater Eng. 2015;10(1):555.
17.
XiZ, ChenJ, LiuT, Experiment and simulation of foaming injection molding of polypropylene/nano-calcium carbonate composites by supercritical carbon dioxide. Chin J Chem Eng. 2016;24(1):180–189. doi: 10.1016/j.cjche.2015.11.016
18.
Gómez-MonterdeJ, SchulteM, IlijevicS, Effect of microcellular foaming on the fracture behavior of ABS polymer. J Appl Polym Sci. 2016;133(7). doi: 10.1002/app.43010
19.
WanC, SunG, GaoF, Effect of phase compatibility on the foaming behavior of LDPE/HDPE and LDPE/PP blends with subcritical CO2 as the blowing agent. J Supercrit Fluids. 2017;120:421–431. doi: 10.1016/j.supflu.2016.05.038
20.
CrankJ, ParkGS.Diffusion in polymers;1968.
21.
DurrillPL, GriskeyRG.Diffusion and solution of gases in thermally softened or molten polymers: part I. development of technique and determination of data. AIChE J. 1966;12(6):1147–1151. doi: 10.1002/aic.690120619
22.
DoniaviA, BabazadehS, AzdastT, An investigation on the mechanical properties of friction stir welded polycarbonate/aluminium oxide nanocomposite sheets. J Elastom Plast. 2017;49(6):498–512. doi: 10.1177/0095244316674352
23.
ModanlooV, HasanzadehR, EsmailiP.The study of deep drawing of brass-steel laminated sheet composite using Taguchi method. Int J Eng-Trans A Basics. 2016;29(1):103–108.
24.
ShishavanSM, AzdastT, AhmadiSR.Investigation of the effect of nanoclay and processing parameters on the tensile strength and hardness of injection molded acrylonitrile butadiene styrene–organoclay nanocomposites. Mater Des. 2014;58:527–534. doi: 10.1016/j.matdes.2014.02.014
25.
KimY, ParkCB, ChenP, Origins of the failure of classical nucleation theory for nanocellular polymer foams. Soft Matter. 2011;7(16):7351–7358. doi: 10.1039/c1sm05575e
26.
WongA, WijnandsSF, KubokiT, Mechanisms of nanoclay-enhanced plastic foaming processes: effects of nanoclay intercalation and exfoliation. J Nanopart Res. 2013;15(8):1313. doi: 10.1007/s11051-013-1815-y
27.
ZhengWG, LeeYH, ParkCB.Use of nanoparticles for improving the foaming behaviors of linear PP. J Appl Polym Sci. 2010;117(5):2972–2979.
28.
NaguibHE, ParkCB, PanzerU, Strategies for achieving ultra-low-density polypropylene foams. Polym Eng Sci. 2002;42(7):1481–1492. doi: 10.1002/pen.11045
29.
BreznyR, GreenDJ.The effect of cell size on the mechanical behavior of cellular materials. Acta Metal Mater. 1990;38(12):2517–2526. doi: 10.1016/0956-7151(90)90263-G
