In this study, montmorillonite organoclay (OMMT) at various concentrations were tested as nanofillers in preparation of UV-cured DGEBA epoxy anticorrosive coatings and applied on carbon steel substrates. The effect of incorporating different compositions of OMMT in UV-cured Araldite 506 coatings on the aqueous corrosion resistance of carbon steel in 5 wt-% aqueous NaCl electrolyte was evaluated. Analysis showed that the OMMT was homogenously dispersed in the polymer matrix. The result of X-ray diffraction showed that a certain degree of intercalation occurred for the OMMT in the polymer matrix. The OMMT addition affects the UV cured of the Araldite 506, as evidenced by Fourier transform infrared spectroscopy. The anticorrosive properties were evaluated by electrochemical impedance spectroscopy at various exposure periods. Coatings with 3 wt-% OMMT possessed the best corrosion performance among the coating specimens. In fact, the NC3 coating provided corrosion protection properties even after a long exposure to NaCl solution.
GonzálesSCáceresFFoxV. Resistance of metallic substrates protected by an organic coating containing aluminum powder. Prog Org Coat. 2003; 46 (4): 317–323. doi: 10.1016/S0300-9440(03)00021-3
2.
ShiXNguyenTASuoZ. Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating. Surf Coat Technol. 2009; 204 (3): 237–245. doi: 10.1016/j.surfcoat.2009.06.048
3.
González-GuzmánJSantanaJJGonzálesS. Resistance of metallic substrates protected by an organic coating containing glass flakes. Prog Org Coat. 2010; 68 (3): 240–243. doi: 10.1016/j.porgcoat.2010.01.005
4.
AssemYKhalafAIRabiaAM. Poly(diallyldimethylammonium chloride)/clay nanocomposites: effect of molecular weight and concentration of polymer on the structural, thermal, and dielectric properties. Polym Bull. 2017; 74 (8): 3015–3026. doi: 10.1007/s00289-016-1873-2
5.
BagherzadehMrMahdaviF.Preparation of epoxy–clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating. Prog Org Coat. 2007; 60 (2): 117–120. doi: 10.1016/j.porgcoat.2007.07.011
6.
JinFLLiXParkSJ.Synthesis and application of epoxy resins: a review. J Ind Eng Chem. 2015; 29 (25): 1–11. doi: 10.1016/j.jiec.2015.03.026
7.
KhanANHayderAChuangWT.Mechanism of intercalation extent in polymer/clay nanocomposites. Arab J Sci Eng. 2015; 40 (12): 3373–3377. doi: 10.1007/s13369-015-1845-0
8.
TomicMDDunjicBLikicV. The use of nanoclay in preparation of epoxy anticorrosive coatings. Prog Org Coat. 2014; 77 (2): 518–527. doi: 10.1016/j.porgcoat.2013.11.017
9.
GâreaSAIovuHVoicuG.The influence of some new montmorillonite modifier agents on the epoxy–montmorillonite nanocomposites structure. Appl Clay Sci. 2010; 50 (4): 469–475. doi: 10.1016/j.clay.2010.09.010
10.
WangSJingY.Effects of formation and penetration properties of biodegradable montmorillonite/chitosan nanocomposite film on the barrier of package paper. Appl Clay Sci. 2017; 138: 74–80. doi: 10.1016/j.clay.2016.12.037
ZareY.Shear, bulk, and Young's moduli of clay/polymer nanocomposites containing the stacks of intercalated layers as pseudoparticles. Nanoscale Res Lett. 2016; 11: 479. doi: 10.1186/s11671-016-1703-3
SangeranoMPallaroERoppoloI. UV-cured epoxy coating reinforced with sepiolite as inorganic filler. J Mater Sci. 2009; 44 (12): 3165–3171. doi: 10.1007/s10853-009-3421-z
15.
WangZXieMZhaoY. Synthesis and properties of novel liquid ester-free reworkable cycloaliphatic diepoxides for electronic packaging application. Polymer (Guildf). 2003; 44 (4): 923–299. doi: 10.1016/S0032-3861(02)00873-X
16.
BarabanovaAIShevninPLPryakhinaTA. Nanocomposites based on epoxy resin and silicon dioxide particles. Polym Sci. 2008; 50 (7): 808–819.
17.
TaoZYangSChenJ. Synthesis and characterization of imide ring and siloxane-containing cycloaliphatic epoxy resins. Eur Polym J. 2007; 43 (4): 1470–1479. doi: 10.1016/j.eurpolymj.2007.01.039
YagciYReetzI.Externally stimulated initiator systems for cationic polymerization. Progr Polym Sci. 1998; 23 (8): 1485–1538. doi: 10.1016/S0079-6700(98)00010-0
20.
HartwigAKoschekKLuhringA.Cationic polymerization of a cycloaliphatic diepoxide with latent initiators in the presence of structurally different diols. Polymer (Guildf). 2003; 44 (10): 2853–2858. doi: 10.1016/S0032-3861(03)00153-8
21.
SangermanoMPeriolattoMSignoreV.Improvement of the water-vapor barrier properties of an uv-cured epoxy coating containing graphite oxide nanoplatelets. Prog Org Coat. 2017; 103: 152–155. doi: 10.1016/j.porgcoat.2016.10.032
22.
NaguibMSangermanoMCapozziLC. Non-reactive and reactive block copolymers for toughening of UV-cured epoxy coating. Prog Org Coat. 2015; 85: 178–188. doi: 10.1016/j.porgcoat.2015.04.008
BongiovanniRMazzaDRonchettiS. The influence of water on the intercalation of epoxy monomers in Na-montmorillonite. J Colloid Interface Sci. 2006; 296 (2): 515–519. doi: 10.1016/j.jcis.2005.09.058
26.
BongiovanniRMalucelliGSangermanoM. Preparation of coatings via cationic photopolymerisation: influence of alcoholic additives. Macromol Symp. 2002; 187 (1): 481–492. doi: 10.1002/1521-3900(200209)187:1<481::AID-MASY481>3.0.CO;2-9
JeyakumarRSampathPSRamamoorthiR. Structural, morphological and mechanical behaviour of glass fibre reinforced epoxy nanoclay composites. Int J Adv Manuf Technol. 2017; 93: 527–535. doi: 10.1007/s00170-017-0565-x
30.
BongiovanniRTurcatoEAGianniAD. Epoxy coatings containing clays and organoclays: effect of the filler and its water content on the UV-curing process. Prog Org Coat. 2008; 62 (3): 336–343. doi: 10.1016/j.porgcoat.2008.01.014
31.
BarlettaMVescoSPuopoloM. Graphene reinforced UV-curable epoxy resins: design, manufacture and material performance. Prog Org Coat. 2016; 90: 414–424. doi: 10.1016/j.porgcoat.2015.08.013
32.
BarlettaMVescoSPuopoloM. High performance composite coatings on plastics: UV-curable cycloaliphatic epoxy resins reinforced by graphene or graphene derivatives. Surf Coat Tech. 2015; 272 (25): 322–336. doi: 10.1016/j.surfcoat.2015.03.046
33.
CecciaaSTurcatoEAMaffettonePL.Nanocomposite UV-cured coatings: organoclay intercalation by an epoxy resin. Prog Org Coat. 2008; 63 (1): 110–115. doi: 10.1016/j.porgcoat.2008.04.012
34.
KwakGHParkSJLeeJR.Thermal stability and mechanical behavior of cycloaliphatic–DGEBA epoxy blend system initiated by cationic latent catalyst. J Appl Polym Sci. 2000; 78 (2): 290–297. doi: 10.1002/1097-4628(20001010)78:2<290::AID-APP80>3.0.CO;2-9
35.
WuHXieHHeG. Effects of the pH and anions on the adsorption of tetracycline on iron-montmorillonite. Appl Clay Sci. 2016; 119 (1): 161–169. doi: 10.1016/j.clay.2015.08.001
36.
HoMWLamCKLauKT. Mechanical properties of epoxy-based composites using nanoclays. Compos Struc. 2006; 75 (1-4): 415–421. doi: 10.1016/j.compstruct.2006.04.051
37.
KotsilkovaR.Processing–structure–properties relationships of mechanically and thermally enhanced smectite/epoxy nanocomposites. J Appl Polym Sci. 2005; 97 (6): 2499–2510. doi: 10.1002/app.21989
38.
GuoBJiaDCaiC.Effects of organo-montmorillonite dispersion on thermal stability of epoxy resin nanocomposites. Eur Polym J. 2004; 40 (8): 1743–1748. doi: 10.1016/j.eurpolymj.2004.03.027
39.
KornmannXLindbergHBerglundLA.Synthesis of epoxy–clay nanocomposites. Influence of the nature of the curing agent on structure. Polymer (Guildf). 2001; 42 (10): 4493–4499. doi: 10.1016/S0032-3861(00)00801-6
40.
RathSKDibyASeghierZ. The effect of amines on the UV-curing of epoxy resins. Iran Polym J. 2006; 15 (11): 855–862.
41.
Cervantes-UcJMCauich-RodríguezJVVazquez-TorresH. Thermal degradation of commercially available organoclays studied by TGA–FTIR. Thermochim Acta. 2007; 457 (1-2): 92–102. doi: 10.1016/j.tca.2007.03.008
42.
ParkSJJinFL.Thermal stabilities and dynamic mechanical properties of sulfone-containing epoxy resin cured with anhydride. Polym Degrad Stabil. 2004; 86 (3): 515–520. doi: 10.1016/j.polymdegradstab.2004.06.003
DeflorianFFedrizziLRossiS. Organic coating capacitance measurement by EIS: ideal and actual trends. Electrochim Acta. 1999; 44 (24): 4243–4249. doi: 10.1016/S0013-4686(99)00139-5
45.
GrundmeierGSchmidtWStratmannM.Corrosion protection by organic coatings: electrochemical mechanism and novel methods of investigation. Electrochim Acta. 2000; 45 (15-16): 2515–2533. doi: 10.1016/S0013-4686(00)00348-0
46.
BellucciFNicodemoLMonettaT. A study of corrosion initiation on polyimide coatings. Corros Sci. 1992; 33 (8): 1203–1226. doi: 10.1016/0010-938X(92)90131-L
47.
BellucciFNicodemoL.Water transport in organic coatings. Corrosion. 1993; 49 (3): 235–247. doi: 10.5006/1.3316044
48.
MirabediniSMThompsonGEMoradianS. Corrosion performance of powder coated aluminium using EIS. Prog Org Coat. 2003; 46 (2): 112–120. doi: 10.1016/S0300-9440(02)00218-7
49.
ZhangSYDingYFLiSJ. Effect of polymeric structure on the corrosion protection of epoxy coatings. Corros Sci. 2002; 44 (4): 861–869. doi: 10.1016/S0010-938X(01)00091-9
