The precise control of tungsten content of electrodeposited nickel–tungsten (NiW) on brass substrate was achieved by applying a well-designed pulse reverse current waveform. A crack-free, uniform and, mirror-like finish surface was obtained by using a novel derivative of propargyl compound, propargyl-oxo-propane-2,3-dihydroxy, as a brightener and grain refiner into the electrodeposition bath. This study indicates that the electrodeposited nickel–tungsten alloys with an optimum tungsten content (32 wt%) possesses outstanding mechanical and, wear performance, also with very low friction of coefficient of 0.2.
FeyzullahoğluE, ZerenA, ZerenM.Tribological behaviour of tin-based materials and brass in oil lubricated conditions. Mater Des. 2008;29:714–720.
2.
LiuC, HuangX, XuR, . Microstructure and properties of nanocrystalline Ni-Mo coatings prepared by ultrasound-assisted pulse electrodeposition. J Mater Eng Perform. 2021;30:2514–2525.
3.
DinaharanI, KarpagarajanS, PalanivelR, . Microstructure and sliding wear behavior of fly ash reinforced dual phase brass surface composites synthesized through friction stir processing. Mater Chem Phys. 2021;263:1–12.
4.
WangX, ChouCC, LeeJW, . Preparation and investigation of diamond-incorporated copper coatings on a brass substrate by composite electrodeposition. Surf Coat Technol. 2020;386.
5.
ZhangY, ZhangS, HeY, . Mechanical properties and corrosion resistance of pulse electrodeposited Ni-B/B4C composite coatings. Surf Coat Technol. 2021;421.
FayyazO, Bahgat RadwanA, SliemMH, . Investigating the properties of electrodeposited of Ni-P-ZrC nanocomposite coatings. ACS Omega. 2021;6:33310–33324.
8.
BigosA, WolowiczM, Janusz-SkuzaM, . Citrate-based baths for electrodeposition of nanocrystalline nickel coatings with enhanced hardness. J Alloys Compd. 2021;850.
9.
ShaikS, BasuA.Effect of multiple dissimilar nanoparticles in NiW alloy matrix composite coating and evaluation of surface-mechanical, corrosion, and hydrophobic properties. Mater Chem Phys. 2022;278.
10.
ArgañarazMPQ, RibottaSB, FolquerME, . The chemistry and structure of nickel–tungsten coatings obtained by pulse galvanostatic electrodeposition. Electrochim Acta. 2012;72:87–93.
11.
EliasL, Chitharanjan HegdeA.Electrodeposition of laminar coatings of NiW alloy and their corrosion behaviour. Surf Coat Technol. 2015;283:61–69.
12.
HosseiniMG, AbdolmalekiM, GhahremaniJ.Investigation of corrosion resistance of electrodeposited NiW/SiC composite coatings. Corros Eng Sci Technol. 2013;49:247–253.
13.
JuškėnasR, ValsiūnasI, PakštasV, . XRD, XPS and AFM studies of the unknown phase formed on the surface during electrodeposition of NiW alloy. Appl Surf Sci. 2006;253:1435–1442.
14.
WasekarNP, LathaSM, RamakrishnaM, . Pulsed electrodeposition and mechanical properties of NiW/SiC nano-composite coatings. Mater Des. 2016;112:140–150.
15.
YaoY, YaoS, ZhangL, . Electrodeposition and mechanical and corrosion resistance properties of NiW/SiC nanocomposite coatings. Mater Lett. 2007;61:67–70.
16.
YinD, MarvelCJ, CuiFY, . Microstructure and fracture toughness of electrodeposited Ni-21 at.% W alloy thick films. Acta Mater. 2018;143:272–280.
MatsuiI, TakigawaY, UesugiT, . Effect of additives on tensile properties of bulk nanocrystalline NiW alloys electrodeposited from a sulfamate bath. Mater Lett. 2013;99:65–67.
19.
WuY, ChangD, KimD, . Effects of 2-butyne-1,4-diol on structures and morphologies of electroplating NiW alloy. Surf Coat Technol. 2003;162:269–275.
20.
HuangPC, ChouCC, WangHT, . Tribocorrosion study of electrodeposited Ni W alloy/BN(h) composited coatings for piston rings. Surf Coat Technol. 2022;436.
21.
VamsiMVN, WasekarNP, SundararajanG.Influence of heat treatment on microstructure and mechanical properties of pulse electrodeposited NiW alloy coatings. Surf Coat Technol. 2017;319:403–414.
22.
Shakibi NiaN, CreusJ, FeaugasX, . Influence of metallurgical parameters on the electrochemical behavior of electrodeposited Ni and NiW nanocrystalline alloys. Appl Surf Sci. 2016;370:149–159.
23.
WasekarNP, SundararajanG.Sliding wear behavior of electrodeposited NiW alloy and hard chrome coatings. Wear. 2015: 342–343. 340–348.
24.
MbuguaNS, KangM, ZhangY, . Electrochemical deposition of Ni, NiCo alloy and NiCo-ceramic composite coatings-A critical review. Materials (Basel). 2020;13.
25.
ChandrasekarMS, PushpavanamM.Pulse and pulse reverse plating—conceptual, advantages and applications. Electrochim Acta. 2008;53:3313–3322.
26.
MohammadpourZ, ZareHR.Improving the corrosion resistance of the nickel–tungsten alloy by Optimization of the electroplating conditions. Trans Indian Inst Met. 2020;73:937–944.
27.
WangY, YuM, LuoH, . Effect of saccharin on the structure and properties of electrodeposition NiWP alloy coatings. J Mater Eng Perform. 2016;25:4402–4407.
28.
ObradovićMD, BošnjakovGŽ, StevanovićRM, . Pulse and direct current plating of NiW alloys from ammonia–citrate electrolyte. Surf Coat Technol. 2006;200:4201–4207.
29.
RahmanOSA, WasekarNP, SundararajanG, . Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating. Mater Charact. 2016;116:1–7.
30.
NamburiL, Electrodeposition of NiW alloys into deep recesses; Thesis, Louisiana State University, Chemical Engineerig Department; December 2001; 1–42.
31.
Handbook, Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, USA, DOI, 1992 2.48.
32.
MaharanaHS, MondalK.Manifestation of Hall–Petch breakdown in nanocrystalline electrodeposited Ni-MoS2 coating and its structure dependent wear resistance behavior. Surf Coat Technol. 2021;410.
33.
GigaA, KimotoY, TakigawaY, . Demonstration of an inverse Hall–Petch relationship in electrodeposited nanocrystalline NiW alloys through tensile testing. Scr Mater. 2006;55:143–146.
34.
SriramanKR, Ganesh Sundara RamanS, SeshadriSK.Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline NiW alloys. Mater Sci Eng A. 2006;418:303–311.
