Mineral particles offer an added stability to three phase froths, in addition to the stability imparted by frothers. The ability of particles to influence froth stability is particle size dependent. Knowledge of the quantitative effect of particle size on froth stability is essential for froth flotation model development and prediction.
This study investigated the extent to which discrete particle size fractions, as well as mixtures of particle size classes, affect the stability of three phase froths in a synthetic pyrite-quartz ore. A novel bench-scale continuous column flotation cell was used to assess froth stability and metallurgical performance. Results obtained show that froth stability decreases as a function of increasing feed particle size. When particle size is transformed to surface area, a linear relationship between froth stability and particle specific surface area is obtained. The effect on flotation performance is reflected by an increase in valuable mineral recovery as froth stability increases.
AktasZ, CilliersJJ, BanfordAW.2008. Dynamic froth stability: particle size, airflow rate and conditioning time effects. Int J Miner Process. 87:65–71. doi: 10.1016/j.minpro.2008.02.001
2.
BikermanJJ.1973. Foams. Berlin: Springer-Verlag.
3.
DenkovND, IvanovIB, KralchevskyPA.1992. A possible mechanism of stabilization of emulsions by solid particles. Journal of Colloid and Interface Science. 150:589–593. doi: 10.1016/0021-9797(92)90228-E
4.
DippenaarA.1982a. The destabilization of froth by solids. I. The mechanism of film rupture. Int J Miner Process. 9:1–14. doi: 10.1016/0301-7516(82)90002-3
5.
DippenaarA.1982b. The destabilization of froth by solids. II. The rate determining step. Int J Miner Process. 9:15–22. doi: 10.1016/0301-7516(82)90003-5
6.
FengD, AldrichC.1999. Effect of particle size on flotation performance of complex sulphide ores. Miner Eng. 12(7):721–731. doi: 10.1016/S0892-6875(99)00059-X
7.
FeterisSM, FrewJA, JowettA.1987. Modelling the effect of froth depth in flotation. Int J Miner Process. 20(1-2):121–135. doi: 10.1016/0301-7516(87)90021-4
8.
GaudinA, GrobJ, HendersonH.1931. Effect of particle size in flotation (No. Technical Publication No. 414). New York, USA.
9.
GranoSR, PrestidgeCA, RalstonJ.1997. Solution interaction of ethyl xanthate and sulphite and its effect on galena flotation and xanthate adsorption. Int J Miner Process. 52:161–186. doi: 10.1016/S0301-7516(97)00066-5
10.
HadlerK, CilliersJJ.2009. The relationship between the peak in air recovery and flotation bank performance. Miner Eng. 22:451–455. doi: 10.1016/j.mineng.2008.12.004
11.
HorozovTS.2008. Foams and foam films stabilised by solid particles. Curr Opin Colloid Interface Sci. 13:134–140. doi: 10.1016/j.cocis.2007.11.009
12.
HunterTN, PughRJ, FranksGV, JamesonG.2008. The role of particles in stabilising foams and emulsions. Adv Colloid Interface Sci. 137:57–81. doi: 10.1016/j.cis.2007.07.007
13.
IpSW, WangY, ToguriJM.1999. Aluminium foam stabilisation by solid particles. Can Metall Q. 38:81–92. doi: 10.1179/cmq.1999.38.1.81
14.
JohanssonG, PughRJ.1992. The influence of particle size and hydrophobicity on the stability of mineralized froths. Int J Miner Process. 34(1-2):1–21. doi: 10.1016/0301-7516(92)90012-L
15.
KaptayG.2006. On the equation of the maximum capillary pressure induced by solid particles to stabilize emulsions and foams and on the emulsion stability diagrams. Colloids Surf A. 282-283:387–401. doi: 10.1016/j.colsurfa.2005.12.021
16.
KohmuenchJN, MankosaMJ.2012. Practical and proven methods for improving ultrafine and coarse particle recovery. In: YoungCA, LuttrellGH, editors. Separation technologies for minerals, coal, and earth resources. Eaglewood, CO; p. 447–456.
17.
Laplante,A. R., Toguri,J. M., and Smith,H. W. (1983). The effect of airflow on the kinetics of flotation. Part 1: the transfer of material from the slurry to the froth. Int J Miner Process, 11, 203–219. doi: 10.1016/0301-7516(83)90026-1
18.
MorarSH, BradshawDJ, HarrisMC.2012. The use of the froth surface lamellae burst rate as a flotation froth stability measurement. Miner Eng. 36-38:152–159. doi: 10.1016/j.mineng.2012.03.018
19.
MoudgilBM, GuptaD.1989, Dec. 3-8. Flotation of coarse phosphate particles. Paper presented at the Advances in Coal and Mineral Processing using flotation.
20.
NeethlingSJ, Brito-ParadaPR.2018. Predicting flotation behavior – the interaction between froth stability and performance. Miner Eng. 120:60–65. doi: 10.1016/j.mineng.2018.02.002
PughRJ.2005. Experimental techniques for studying the structure of foams and froths. Adv Colloid Interface Sci. 114-115:239–251. doi: 10.1016/j.cis.2004.08.005
23.
RahmanRM, AtaS, JamesonGJ.2012. The effect of flotation variables on the recovery of different particle size fractions in the froth and the pulp. Int J Miner Process. 106-109:70–77. doi: 10.1016/j.minpro.2012.03.001
24.
SmithPG, WarrenIJ.1989. Entrainment of particles into flotation froths. Miner Process Extr Metall Rev5:123–145. doi: 10.1080/08827508908952647
25.
SotoHS.1992. Development of novel flotation-elutriation method for coarse phosphate beneficiation. Final report to Florida Institute of Phosphate Research; Publication number 02-070-098.
26.
SzatkowskiM, FreyburgerWL.1985. Kinetics of flotation with fine bubbles. Trans Inst Min Metall Sec C. 94:C61–C70.
27.
TriffettB, CilliersJJLR.2006. London, England. Patent No.: E. P. Specification.
28.
VeraMA, FranzidisJP, ManlapigEV.1999. Simultaneous determination of collection zone rate constant and froth zone recovery in a mechanical flotation environment. Miner Eng. 12(10):1163–1176. doi: 10.1016/S0892-6875(99)00103-X
29.
VieiraA. M, PeresA. E. C.2007. The effect of amine type, pH, and size range in the flotation of quartz. Minerals Engineering. 20:1008–1013. doi: 10.1016/j.mineng.2007.03.013
