Abstract
Objective: The purpose of this study was to examine the morphological changes and temperature increases of the titanium after Er:YAG laser irradiation, and also to investigate the effect of this laser on debridement of contaminated healing abutments. Background Data: Mechanical instruments have been used for the cleaning of implant abutment surfaces, however, most of them are not appropriate for the application to titanium surface. Recently, the Er:YAG laser has been expected to have a promising ability for the debridement of implant surface. Materials and Methods: Experiments were composed of three parts. At first, ten titanium round plates were exposed to the Er:YAG laser irradiation at 30-200 mJ/pulse and the surface changes were observed by stereomicroscope and scanning electron microscope. Secondly, the surface temperature changes of 60 titanium plates during and after Er:YAG laser irradiation at 30 and 50 mJ/pulse were measured by thermographic equipment. At last, calculus on the surface of six contaminated healing abutments was removed by Er:YAG laser or ultrasonic scaler, and the treated surfaces were examined by stereomicroscope. Results: Under 50 mJ/pulse, distinct morphological changes were not observed and the elevation of surface temperature was minimal, especially in the use of water-cooling. The Er:YAG laser at 30 mJ/pulse and 30 Hz with water spray was capable of effectively removing plaque and calculus on the implant abutments without injuring their surfaces. Conclusion: This study indicates that the Er:YAG laser can be a novel technical modality for the debridement of implant abutment surface.
Get full access to this article
View all access options for this article.