3D Printing–Assisted Rapid Prototyping and Optimization: Development of a Novel Small Intestinal Cannula for Equine Research

Abstract

In the field of nutrition research, the surgical placement of intestinal cannulas in animal models is a commonly used method for assessing nutrient absorption along the digestive tract. This technique allows researchers to obtain intestinal fluid at key checkpoints along the digestive tract. Cannulation studies have been limited by the availability of suitable cannulas for different animal models. This study discusses the creation of a novel cannula that was fabricated using 3D-printed molds and moldable silicone putty. CAD software was used to design the cannula, and 3D-printed models allowed our clinical researchers to assess physical models for suitability. A negative of the final model was created by CAD, sectioned into three pieces to serve as a mold, and then 3D printed. This mold was filled with silicone putty, compressed using vices, and allowed to set. The resulting cannula was removed from the mold and trimmed of excess material to create the final product. These cannulas were then surgically implanted as part of ongoing equine nutrition research. This technique allowed for the rapid development and optimization of custom cannulas, without the prohibitively high costs, expertise requirements, and timeline associated with traditional rubber molding techniques.

Get full access to this article

View all access options for this article.

References

Chung

, Baker

. Apparent and true amino acid digestibility of a crystalline amino acid mixture and of casein: comparison of values obtained with ileal-cannulated pigs and cecectomized cockerels. J Anim Sci, 1992; 70:3781–3790.

Walker

, et al. Evaluation of nutrient utilization in the canine using the ileal cannulation technique. J Nutr, 1994; 124:2672S–2676S.

Swanson

, et al. Supplemental fructooligosaccharides and mannanoligosaccharides influence immune function, ileal and total tract nutrient digestibilities, microbial populations and concentrations of protein catabolites in the large bowel of dogs. J Nutr, 2002; 132:980–989.

Mroz

, et al. Apparent digestibility of nutrients in diets with different energy density, as estimated by direct and marker methods for pigs with or without ileo-cecal cannulas. J Anim Sci, 1996; 74:403–412.

Allen

, et al. Development of a bovine ileal cannulation model to study the immune response and mechanisms of pathogenesis of paratuberculosis. Clin Vaccine Immunol, 2009; 16:453–463.

Gibbs

, et al. The significance of small vs large intestinal digestion of cereal grain and oilseed protein in the equine. J Equine Vet Sci, 1996; 16:60–65.

Hill

, et al. Ileal cannulation and associated complications in dogs. Lab Anim Sci, 1996; 46:77–80.

Mawby

, et al. Complications of ileal cannulation in cats. Lab Anim Sci, 1999; 49:406–410.

Taniguchi

, et al. Use of a rigid-type polyethylene T-cannula, silicone tubing, and adhesion netting for surgical cannulation of ileum of the horse. J Vet Med Sci, 2003; 65:927–930.

10.

Peloso

, et al. Technique for long-term ileal cannulation in ponies. Can J Vet Res, 1994; 58:181–184.

11.

Coleman

, et al. Cannulation of the distal ileum in ponies. Can J Anim Sci, 1998; 78:445–447.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

1.46 MB