Abstract
ABSTRACT
The co-firing of conventional fossil fuel with hazardous waste-derived fuel (WDF) in cement and aggregate kilns has increased considerably since 1984. Data are compiled from compliance-test reports for cement and light-aggregate kilns at steady-state conditions. These data reveal that the majority of each metal is incorporated into the kiln dust and product (cement clinker or aggregate product). Distribution ratios, for kiln dust and emissions relative to the total kiln system, are calculated for the metals arsenic (As), beryllium (Be), cadmium (Cd), chromium (Cr), and lead (Pb). Calculations, which use these ratios, balance the input and output metal mass by assigning the remaining metal to the product. These balance calculations include kilns that recirculate kiln dust and those that do not. Comparing reported and calculated metal concentrations in the product (cement clinker or aggregate product) provides a qualitative method for evaluating metals balance. Most compliance data yield poor agreement between the input and output masses. Metal distributions in kilns that recirculate different portions of cement kiln dust (CKD) indicate an increased tendency to concentrate As and Cr into CKD with increased CKD recirculation. This effect likely results from the rather low volatility of As and Cr. Metal concentrations in CKD, which are computed for the co-firing of WDF and fossil fuel in the kilns, are distinctly higher than those based on burning fossil fuel alone. A moderate to strong correlation of CKD metal concentrations with fuel metal concentrations indicates a fundamental control of CKD composition by fuel composition. Metal concentrations calculated for the transient approach to steady-state conditions provide a theoretical representation of that process. Equilibration test data, from compliance reports, show an irregular approach to steady-state conditions. This variable accumulation and release behavior appears typical of the transient part of the process, and may increase the uncertainty in assessing steady-state conditions.
Key words:
Cement kiln; hazardous waste derived fuel; heavy metal; kiln dust; mass balance; steady state
Get full access to this article
View all access options for this article.