Polyurethane (PU) foams are finding increasingly wider applications ranging from memory foams and mattresses to cushions and insulation materials. They are prepared by reactions between multifunctional isocyanates and polyols as the two main building blocks, along with other additives, including the blowing agents. A non-contact near-infrared (NIR) hyperspectral imaging (HSI) camera was used in this study to monitor PU foaming reactions between a polymeric methylene diphenyl diisocyanate, polyol, and water. Five foams were prepared with three process variables: water content, mixing time, and catalyst levels. Spectral changes characteristic of the PU reactions were observed and clear difference in kinetics could be effectively extracted from such NIR HSI results. The NIR HSI technology offers two substantial advantages over the conventional Fourier transform- (FT-) NIR systems: (i) faster spectral acquisition time and (ii) higher spatial resolution of line images rather than the point measurement. Examples are provided to illustrate these two advantages. The potential to acquire chemical images of PU foams is also demonstrated.
KausarA.“Polyurethane Composite Foams in High-Performance Applications: A Review”. Polym.-Plast. Technol. Eng. 2018. 57(4): 346–369.
2.
AkindoyoJ.O.BegM.D.H.GhazaliS., et al.“Polyurethane Types, Synthesis and Applications: A Review”. RSC Adv. 2016. 6(115): 114453–114482.
3.
SonnenscheinM.F.Polyurethanes: Science, Technology, Markets, and Trends., Hoboken, New Jersey: John Wiley and Sons, 2014.
4.
M. Szycher. Szycher's Handbook of Polyurethanes. Boca Raton, Florida: CRC Press, 2013.
5.
BaserS.A.KhakharD.V.“Modeling of the Dynamics of Water and R-11 Blown Polyurethane Foam Formation”. Polym. Eng. Sci. 1994. 34(8): 632–641.
6.
LefebvreL.KeuningsR.“Finite Element Modeling of the New Flow of Chemically Reactive Polymeric Liquids”. Int. J. Numer. Methods. 1995. 20(4): 319–334.
7.
RaoR.R.MondyL.A.NobleD., et al.“Density Predictions Using a Finite Element/Level Set Model of Polyurethane Foam Expansion and Polymerization”. Comput. Fluids. 2018. 175: 20–35.
8.
BikardJ.BruchonJ.CouplezT., et al.“Numerical Prediction of the Foam Structure of Polymeric Materials by Direct 3D Simulation of Their Expansion by Chemical Reaction Based on a Multidomain Method”. J. Mater. Sci. 2005. 40: 5875–5881.
9.
BikardJ.BruchonJ.CouplezT., et al.“Numerical Simulation of 3D Polyurethane Expansion During Manufacturing Process”. Colloids Surf., A. 2007. 309(1–3): 49–63.
10.
RaoR.R.MondyL.A.LongK.N., et al.“The Kinetics of Polyurethane Structural Foam Formation: Foaming and Polymerization”. AIChE J. 2017. 63(7): 2945–2957.
11.
PapadopoulosE.MilenaG.M.ClarkeS.“Reaction Kinetics of Polyurethane Formation Using a Commercial Oligomeric Diisocyanate Resin Studied by Calorimetric and Rheological Methods”. Macromol. Chem. Phys. 2008. 209: 2302–2311.
12.
ChiacchiarelliL.M.KennyJ.M.TorreL.“Kinetic and Chemorheological Modeling of the Vitrification Effect of Highly Reactive Poly(Urethane-Isocyanurate) Thermosets”. Thermochim. Acta. 2013. 574: 88–97.
13.
ChernC.S.“Curing Kinetics of Polyurethane Reactions”. J. Appl. Polym. Sci. 1990. 40(11–12): 2189–2205.
ProchazkaF.NicolaiT.DurandD.“Dynamic Viscoelastic Characterization of a Polyurethane Network Formation”. Macromolecules. 1996. 29(6): 2260–2264.
16.
RocheryM.LamT.M.“Chemorheology of Polyurethane. I. Vitrification and Gelation Studies”. J. Polym. Sci.Part B: Polym. Phys. 2000. 38(4): 544–551.
17.
DimierF.SbirrazzuoliN.VergnesB., et al.“Curing Kinetics and Chemorheological Analysis of Polyurethane Formation”. Polym. Eng. Sci. 2004. 44(3): 518–527.
18.
LiS.VatanparastR.LemmetyinenH.“Cross-Linking Kinetics and Swelling Behaviour of Aliphatic Polyurethane”. Polymer. 2000. 41(15): 5571–5576.
19.
BurelF.FeldmanA.BunelC.“Hydrogenated Hydroxy-Functionalized Polyisoprene (H-HTPI) and Isocyanurate of Isophorone Diisocyanates (I-IPDI): Reaction Kinetics Study Using FTIR Spectroscopy”. Polymer. 2005. 46(1): 15–25.
20.
KincalD.ÖzkarS.“Kinetic Study of the Reaction Between Hydroxyl-Terminated Polybutadiene and Isophorone Diisocyanate in Bulk by Quantitative FTIR Spectroscopy”. J. Appl. Polym. Sci. 1997. 66(10): 1979–1983.
21.
CatetoC.BarreiroM.RodriguesA.“Monitoring of Lignin-Based Polyurethane Synthesis by FTIR-ATR”. Ind. Crops Prod. 2008. 27(2): 168–174.
22.
ElwellM.J.RyanA.J.GrünbauerH.J., et al.“An FT IR Study of Reaction Kinetics and Structure Development in Model Flexible Polyurethane Foam Systems”. Polymer. 1996. 37(8): 1353–1361.
23.
YangY.LeeL.J.“Comparison of Thermal and Infrared Spectroscopic Analyses in the Formation of Polyurethane, Unsaturated Polyester, and Their Blends”. J. Appl. Polym. Sci. 1988. 36(6): 1325–1342.
24.
XuL.C. LiNgK.S.“In-Situ Monitoring of Urethane Formation by FTIR and Raman Spectroscopy”. J. Phys. Chem. A. 2000. 104(17): 3952–3957.
25.
CrandallE.W.JagtapA.N.“The Near-Infrared Spectra of Polymers”. J. Appl. Polym. Sci. 1977. 21(2): 449–454.
26.
MillerC.E.EichingerB.“Analysis of Rigid Polyurethane Foams by Near-Infrared Diffuse Reflectance Spectroscopy”. Appl. Spectrosc. 1990. 44(5): 887–894.
DethomasF.A.HallJ.W.MonfreS.L.“Real-Time Monitoring of Polyurethane Production Using Near-Infrared Spectroscopy”. Talanta. 1994. 41(3): 425–431.
29.
DupuyJ.BenaliS.MaazouzA., et al.“FT-NIR Monitoring of a Scattering Polyurethane Manufactured by Reaction Injection Molding (RIM): Univariate and Multivariate Analysis Versus Kinetic Predictions”. Macromol. Symp. 2002. 184(1): 249–260.
30.
ParnellS.MinK.CakmakM.“Kinetic Studies of Polyurethane Polymerization with Raman Spectroscopy”. Polymer. 2003. 44(18): 5137–5144.
KamruzzamanM.ElmasryG.SunD.-W., et al.“Non-Destructive Prediction and Visualization of Chemical Composition in Lamb Meat Using NIR Hyperspectral Imaging and Multivariate Regression”. Innovative Food Sci. Emerging Technol. 2012. 16: 218–226.
33.
GowanA.O'DonnellC.CullenP., et al.“Hyperspectral Imaging: An Emerging Process Analytical Tool for Food Quality and Safety Control”. Trends Food Sci. Technol. 2007. 18(12): 590–598.
34.
DaleL.M.ThewisA.BoudryC., et al.“Hyperspectral Imaging Applications in Agriculture and Agro-Food Product Quality and Safety Control: A Review”. Appl. Spectrosc. Rev. 2013. 48(2): 142–159.
35.
WilliamsP.J.GeladiP.BritzT.J., et al.“Investigation of Fungal Development in Maize Kernels Using NIR Hyperspectral Imaging and Multivariate Data Analysis”. J. Cereal Sci. 2012. 55(3): 272–278.
36.
OkamotoH.MurataT.KataokaT., et al.“Plant Classification for Weed Detection Using Hyperspectral Imaging with Wavelet Analysis”. Weed Biol. Manage. 2007. 7(1): 31–37.
37.
GomezC.RosselR.A.V.McBratneyA.B.“Soil Organic Carbon Prediction by Hyperspectral Remote Sensing and Field Vis-NIR Spectroscopy: An Australian Case Study”. Geoderma. 2008. 146(3–4): 403–411.
38.
ClarkR.N.RoushT.L.“Reflectance Spectroscopy: Quantitative Analysis Techniques for Remote Sensing Applications”. J. Geophys. Res.: Solid Earth. 1984. 89(B7): 6329–6340.
39.
GaoB.-C.“NDWI: A Normalized Difference Water Index for Remote Sensing of Vegetation Liquid Water from Space”. Remote Sens. Environ. 1996. 58(3): 257–266.
40.
WorkmanJ.JrWeyerL.Practical Guide and Spectral Atlas for Interpretive Near-Infrared Spectroscopy., Boca Raton, FL: CRC Press, 2012.
41.
ZvetkovV.L.“Comparative DSC Kinetics of the Reaction of DGEBA with Aromatic Diamines. I. Isothermal Kinetic Study of the Reaction of DGEBA with m-Phenylene Diamine”. Polymer. 2001. 42(16): 6687–6697.
42.
DupuyJ.BenaliS.MaazouzA., et al.“FT-NIR Monitoring of a Scattering Polyurethane Manufactured by Reaction Injection Molding (RIM): Univariate and Multivariate Analysis Versus Kinetic Predictions”. Macromol. Symp. 2002. 184(1): 249–260.
43.
ShkapenkoG.GmitterG.T.GruberE.E.“Mechanism of the Water–Lsocyanate Reaction”. Ind. Eng. Chem. 1960. 52(7): 605–608.
