The development of non-contact in situ techniques for monitoring cure kinetics has the potential to greatly improve both resin formulation and processing. We have recently shown that low-frequency Raman spectroscopy is a viable method for assessing resin structural cure kinetics and complements the traditional chemical conversion determined from the fingerprint region of the spectrum. In this work, we further evaluate the relationship between structural and chemical conversion by investigating two chemically identical yet rheologically different interpenetrating polymer network resin formulations. Rheological analysis demonstrates a relationship between structural conversion and storage modulus, which is not observed in the chemical conversion data. We show that one can produce master cure kinetics curves with comparable kinetic constants using both the chemical and structural conversion methodologies. Parametric analysis of the structural conversion, chemical conversion, and photorheological conversion was combined with a semi-empirical model for the storage shear modulus as a function of the extent of cure.
Mashouf RoudsariG.MohantyA.K.MisraM.. “Study of the Curing Kinetics of Epoxy Resins with Biobased Hardener and Epoxidized Soybean Oil”. ACS Sustainable Chem. Eng. 2014. 2(9): 2111–2116. https://doi.org/10.1021/Sc500176z
2.
KopatzJ.W.UnangstJ.CookA.W.AppelhansL.N.. “Compositional Effects on Cure Kinetics, Mechanical Properties and Printability of Dual-Cure Epoxy/Acrylate Resins for DIW Additive Manufacturing”. Addit. Manuf. 2021. 46: 102159. https://doi.org/10.1016/j.addma.2021.102159
3.
JiangF.DrummerD.. “Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC”. Polymers. 2020. 12(5): 1080. https://doi.org/10.3390/polym12051080
4.
KaramiM.H.KalaeeM.R.MazinaniS.ShakibaM., et al. “Curing Kinetics Modeling of Epoxy Modified by Fully Vulcanized Elastomer Nanoparticles Using Rheometry Method”. Molecules. 2022. 27(9): 2870. https://doi.org/10.3390/molecules27092870
5.
WuF.ZhouX.YuX.. “Reaction Mechanism, Cure Behavior and Properties of a Multifunctional Epoxy Resin, TGDDM, with Latent Curing Agent Dicyandiamide”. RSC Adv. 2018. 8(15): 8248–8258. https://doi.org/10.1039/C7RA13233F
6.
IshidaT.WatanabeR.ShinzawaH.MizukadoJ., et al. “In-Situ Infrared Cure Monitoring Combined with Two-Trace Two-Dimensional (2T2D) Correlation Analysis to Elucidate the Matrix–Filler Interaction of Nanocomposites: Case of Thermosetting Urethane/Silica Nanospheres”. Polym. Test. 2022. 112: 107587. https://doi.org/10.1016/j.polymertesting.2022.107587
7.
TuJ.MakarianK.AlvarezN.J.PalmeseG.R.. “Formulation of a Model Resin System for Benchmarking Processing–Property Relationships in High-Performance Photo 3D Printing Applications”. Materials. 2020. 13(18): 4109. https://doi.org/10.3390/ma13184109
8.
ChimentiR.V.CarriereJ.T.D’AscoliD.M.EngelhardtJ.D.. “Toward a Practical Method for Measuring Glass Transition in Polymers with Low-Frequency Raman Spectroscopy”. Appl. Phys. Lett. 2023. 122(26): 264101. https://doi.org/10.1063/5.0155631
9.
ChimentiR.V.Lehman-ChongA.M.SepcicA.M.EngelhardtJ.D., et al. “Method for Determining Resin Cure Kinetics with Low-Frequency Raman Spectroscopy”. Analyst. 2023. 148(22): 5698–5706. https://doi.org/10.1039/D3AN01099F
10.
RombergS.K.KotulaA.P.. “Simultaneous Rheology and Cure Kinetics Dictate Thermal Post-Curing of Thermoset Composite Resins for Material Extrusion”. Addit. Manuf. 2023. 71: 103589. https://doi.org/10.1016/J.Addma.2023.103589
11.
KotulaA.P.WoodcockJ.W.GilmanJ.W.HolmesG.A.. “A Cure Kinetics Investigation of Amine-Cured Epoxy by Rheo-Raman Spectroscopy”. Polymer. 2023. 278: 125967. https://doi.org/10.1016/j.polymer.2023.125967
12.
MartinB.PuentesJ.WruckL.OsswaldT.A.. “Degree of Cure of Epoxy/Acrylic Photopolymers: Characterization with Raman Spectroscopy and a Modified Phenomenological Model”. Polym. Eng. Sci. 2018. 58(2): 228–237. https://doi.org/10.1002/Pen.24550
13.
FengL.NgK.Y.S.. “In Situ Kinetic Studies of Microemulsion Polymerizations of Styrene and Methyl Methacrylate by Raman Spectroscopy”. Macromolecules. 1990. 23(4): 1048–1053. https://doi.org/10.1021/Ma00206a023
14.
Bertoldo MenezesD.ReyerA.BenisekA.DachsE.PrunerC.MussoM.. “Raman Spectroscopic Insights into the Glass Transition of Poly(Methyl Methacrylate)”. Phys Chem Chem Phys. 2021. 23(2): 1649–1665. https://doi.org/10.1039/d0cp05627h
15.
SokolovA.P.BuchenauU.SteffenW.FrickB.WischnewskiA.. “Comparison of Raman- and Neutron-Scattering Data for Glass-Forming Systems”. Phys. Rev. B. 1995. 52(14): R9815–R9818. https://doi.org/10.1103/physrevb.52.R9815
KirillovS.A.NielsenO.F.. “Boson Peak in the Low-Frequency Raman Spectra of an Ordinary Liquid”. J. Mol. Struct. 2000. 526(1): 317–321. https://doi.org/10.1016/S0022-2860(00)00525-1
GrimsditchM.PolianA.VogelgesangR.. “The Phonon Density of States in Amorphous Materials”. J. Phys.: Condens. Matter. 2003. 15(31): S2335. https://doi.org/10.1088/0953-8984/15/31/309
20.
KirillovS.A.KolomiyetsT.M.. “Disorder in Binary Polymer Systems Near Their Critical Region Studied by Low-Frequency Raman Spectroscopy”. J. Phys. Chem. B. 2001. 105(16): 3168–3173. https://doi.org/10.1021/jp0016941
21.
ShukerR.GammonR.W.. “Raman-Scattering Selection-Rule Breaking and the Density of States in Amorphous Materials”. Phys. Rev. Lett. 1970. 25(4): 222–225. https://doi.org/10.1103/physrevlett.25.222
22.
AndoM.F.BenzineO.PanZ.GardenJ.-L., et al. “Boson Peak, Heterogeneity and Intermediate-Range Order in Binary SiO2–Al2O3 Glasses”. Sci. Rep. 2018. 8(1): 5394. https://doi.org/10.1038/S41598-018-23574-1
23.
ChimentiR.V.. Towards a Practical Method for Monitoring Kinetic Processes in Polymers with Low-Frequency Raman Spectroscopy. [Doctor of Philosophy in Physics and Astronomy Dissertation]. Glassboro, New Jersey: Rowan University, 2024.
24.
Lehman-ChongA.M.. Advancing Polymer Sustainability Through Custom Interpenetrating Polymer Network Synthesis, Processing, and Design. [Doctor of Philosophy in Chemical Engineering Dissertation]. Glassboro, New Jersey: Rowan University, 2023.
MenezesD.B.ReyerA.MarlettaA.MussoM.. “Glass Transition of Polystyrene (PS) Studied by Raman Spectroscopic Investigation of Its Phenyl Functional Groups”. Mater. Res. Express. 2017. 4(1): 015303. https://doi.org/10.1088/2053-1591/4/1/015303
27.
O’BrienD.J.MatherP.T.WhiteS.R.. “Viscoelastic Properties of an Epoxy Resin During Cure”. J. Compos. Mater. 2001. 35(10): 883–904. https://doi.org/10.1177/A037323
28.
AldridgeM.WinemanA.WaasA.KiefferJ.. “In Situ Analysis of the Relationship Between Cure Kinetics and the Mechanical Modulus of an Epoxy Resin”. Macromolecules. 2014. 47(23): 8368–8376. https://doi.org/10.1021/ma501441c
29.
PéronM.SobotkaV.BoyardN.Le CorreS.. “Bulk Modulus Evolution of Thermoset Resins During Crosslinking: Is a Direct and Accurate Measurement Possible?”. J. Compos. Mater. 2017. 51(4): 463–477. https://doi.org/10.1177/0021998316647119
30.
SaseendranS.WysockiM.VarnaJ.. “Cure-State Dependent Viscoelastic Poisson’s Ratio of LY5052 Epoxy Resin”. Adv. Manuf.: Polym. Compos. Sci. 2017. 3(3): 92–100. https://doi.org/10.1080/20550340.2017.1348002
31.
WangJ.MuX.LiD.YuC., et al. “Modeling and Application of Planar-to-3D Structures via Optically Programmed Frontal Photopolymerization”. Adv. Eng. Mater. 2019. 21(5): 1801279. https://doi.org/10.1002/adem.201801279.
32.
UzcateguiA.C.HigginsC.I.HergertJ.E.TomaschkeA.E., et al. “Microscale Photopatterning of Through-Thickness Modulus in a Monolithic and Functionally Graded 3D-Printed Part”. Small Sci. 2021. 1(3): 2000017. https://doi.org/10.1002/smsc.202000017
33.
Müller-PabelM.Rodríguez AgudoJ.A.GudeM.. “Measuring and Understanding Cure-Dependent Viscoelastic Properties of Epoxy Resin: A Review”. Polym. Test. 2022. 114: 107701. https://doi.org/10.1016/j.polymertesting.2022.107701
34.
PatilS.U.KriegA.S.OdegardL.K.YadavU., et al. “Simple and Convenient Mapping of Molecular Dynamics Mechanical Property Predictions of Bisphenol-F Epoxy for Strain Rate, Temperature, and Degree of Cure”. Soft Matter. 2023. 19(35): 6731–6742. https://doi.org/10.1039/D3SM00697B
35.
TuJ.KashcooliY.AlvarezN.J.PalmeseG.R.. “A Practical Framework for Predicting Conversion Profiles in Vat Photopolymerizations”. Addit. Manuf. 2022. 59: 103102. https://doi.org/10.1016/j.addma.2022.103102
36.
ZhangY.KranbuehlD.E.SautereauH.SeytreG.DupuyJ.. “Study of UV Cure Kinetics Resulting from a Changing Concentration of Mobile and Trapped Radicals”. Macromolecules. 2008. 41(3): 708–715. https://doi.org/10.1021/ma702117e
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
