Objective: The aim was to determine the maximum force that can be exerted on an object before it is pulled or slips from the grasp of the hand (“breakaway strength”) for fixed overhead handholds of varying orientation, shape, and friction. Background: Many studies have quantified hand strength by having participants squeeze, pull on, or create torque on an object or handle, but few studies have measured breakaway strength directly. Method: In two experiments, hand strength was measured as both overhead breakaway strength for handholds typical of fixed industrial ladders and as maximum isometric grip strength measured using a common Jamar grip dynamometer. Results: Breakaway strength was greatest for a fixed horizontal cylinder (“high friction”; 668 ± 40 N and 691 ± 132 N for Experiments 1 and 2, respectively), then for a horizontal cylinder that simulated low surface friction (“low friction”; 552 ± 104 N), then for a vertical cylinder (435 ± 27 N), and finally, for a vertical rectangular-shaped rail (337 ± 24 N). Participants are capable of supporting only their own body weight with one hand when grasping the fixed horizontal cylinder. Breakaway strength for both the high- and low-friction horizontal cylinders was significantly greater than isometric grip strength (1.58 ± 0.25 and 1.26 ± 0.19 times, respectively). Conclusion: Results support the hypothesis that hand-handhold coupling is composed of active (isometric or eccentric finger flexion) and passive (frictional) components. Traditional isometric grip strength alone does not predict the strength of a couple between a hand and a handhold well. Application: This research shows that handhold shape, orientation, and friction are important in the safe design of grab rails or ladders.
Amis, A.A. ( 1987). Variation of finger forces in maximal isometric grasp tests on a range of cylinder diameters. Journal of Biomedical Engineering, 9, 313-320.
2.
Armstrong, T.J., Buckle, P., Fine, L.J., Hagberg, M., Jonsson, B., Kilbom, A., Kuorinka, I.A., Silverstein, B.A., Sjogaard, G., & Viikari-Juntura, E.R. (1993). A conceptual model for work-related neck and upper-limb musculoskeletal disorders. Scandinavian Journal of Work, Environment and Health, 19, 73-84.
3.
Barnett, R., & Poczynck, P. ( 2000). Ladder rung vs. siderail hand grip strategies. Safety Brief (Triodyne Inc.), 16(4), 1-15.
4.
Basmajian, J.V., & De Luca, C.J. (1985). Muscles alive: Their functions revealed by electromyography. Baltimore: Williams and Wilkins.
5.
Bureau of Labor Statistics. (2007). 2006 census of fatal occupational injuries (revised data). Washington, DC: Author.
6.
Bobjer, O., Johansson, S.E., & Piguet, S. ( 1993). Friction between the hand and handle. Effects of oil and lard on textured and non-textured surfaces; perception of discomfort. Applied Ergonomics, 24, 190-202.
7.
Bottoms, D.J. ( 1983). Design guidelines for operator entry-exit systems on mobile equipment. Applied Ergonomics, 14, 83-90.
8.
Buchholz, B., Frederick, L.J., & Armstrong, T.J. (1988). An investigation of human palmar skin friction and the effects of materials, pinch force and moisture . Ergonomics, 31, 317-325.
9.
Cochran, D.J., & Riley, M.W. ( 1986). The effects of handle shape and size on exerted forces . Human Factors, 28, 253-265.
10.
Comaish, S., & Bottoms, E. ( 1971). The skin and friction: Deviations from Admanton’s laws, and the effects of hydration and lubrication. British Journal of Dermatology, 84, 37-43.
11.
Das, B., & Wang, Y. ( 2004). Isometric pull-push strengths in workspace: 1. Strength profiles. International Journal of Occupational Safety and Ergonomics, 10, 43-58.
12.
Dempsey, D.G., & Ayoub, M.M. ( 1996). The influence of gender, grasp type, pinch width, and wrist position on sustained pinch strength. International Journal of Industrial Ergonomics, 17, 259-273.
13.
D’Souza, A., Smith, G., & Trifiletti, L. (2007). Ladder-related injuries treated in emergency departments in the United States, 1990-2005. American Journal of Preventive Medicine, 32, 413-418.
14.
Dvir, Z. ( 1997). The measurement of isokinetic finger flexion strength . Clinical Biomechanics, 12, 473-481.
15.
Edgren, C.S., Radwin, R.G., & Irwin, C.B. ( 2004). Grip force vectors for varying handle diameters and hand sizes. Human Factors, 46, 244-251.
16.
Fothergill, D.M., Grieve, D.W., & Pheasant, S.T. (1992). Influence of some handle designs and handle height on the strength of the horizontal pulling action . Ergonomics, 35, 203-212.
17.
Garrett, J.W. ( 1971). The adult human hand: Some anthropometric and biomechanical considerations. Human Factors, 13, 117-131.
18.
Holewijn, M., & Heus, R. ( 1992). Effects of temperature on electromyogram and muscle function . European Journal of Applied Physiology and Occupational Physiology, 65, 541-545.
19.
Imrhan, S.N., & Farahmand, K. ( 1999). Male torque strength in simulated oil rid tasks: The effects of grease-smeared gloves and handle length, diameter and orientation . Applied Ergonomics, 30, 455-462.
20.
Kattel, B.P., Fredericks, T.K., Fernandez, J.E., & Lee, D.C. ( 1996). The effect of upper-extremity posture on maximum grip strength. International Journal of Industrial Ergonomics, 18, 423-429.
21.
Katz, B. ( 1939). The relation between force and speed in muscular contraction . Journal of Physiology, 96, 45-64.
22.
Kong, Y.K., & Freivalds, A. ( 2003). Evaluation of meat-hook handle shapes. International Journal of Industrial Ergonomics, 32, 13-23.
23.
Kong, Y.K., & Lowe, B.D. ( 2005a). Evaluation of handle design characteristics in a maximum screwdriving torque task. Ergonomics, 50, 1404-1418.
24.
Kong, Y.K., & Lowe, B.D. ( 2005b). Optimal cylindrical handle for grip force tasks. International Journal of Industrial Ergonomics, 35, 495-507.
25.
Kuzala, E.A., & Vargo, M.C. ( 1992). The relationship between elbow position and grip strength . American Journal of Occupational Therapy, 46, 509-512.
26.
Lanska, D.J. ( 2000). William Hammond, the dynamometer, the dynamograph. Archives of Neurology, 57, 1649-1653.
27.
Laumoreaux, L., & Hoffer, M.M. ( 1995). The effect of wrist deviation on grip and pinch strength . Clinical Orthopaedics and Related Research, 314, 152-155.
28.
Lehman, K.R., Allread, G.W., Wright, P.L., & Marras, W.S. ( 1993). Quantification of hand grip force under dynamic conditions . In Proceedings of the Human Factors and Ergonomics Society 37th Annual Meeting (pp. 715-719). Santa Monica, CA: Human Factors and Ergonomics Society.
29.
Leyk, D., Rohde, U., Erley, O., Gorges, W., Wunderlich, M., Ruther, T., & Essfeld, D. ( 2006). Recovery of hand grip strength and hand steadiness after exhausting manual stretcher carriage. European Journal of Applied Physiology, 96, 593-599.
30.
Mathiowetz, V., Kashman, N., Volland, G., Weber, K., Dowe, M., & Rogers, S. ( 1985). Grip and pinch strength: Normative data for adults. Archives of Physical Medicine and Rehabilitation, 66, 69-74.
31.
McGorry, R.W., & Lin, J.H. ( 2007). Power grip strength as a function of tool handle orientation and location. Ergonomics, 50, 1392-1403.
32.
Mogk, J., & Keir, P. ( 2003). The effects of posture on forearm muscle loading during gripping. Ergonomics, 46, 956-975.
33.
Morse, J.L., Jung, M., Bashford, G.R., & Hallbeck, M.S. (2006). Maximal dynamic grip force and wrist torque: The effects of gender, exertion direction, angular velocity, and wrist angle. Applied Ergonomics, 37, 737-742.
34.
O’Driscoll, S.W., Horii, E., Ness, R., Cahalan, T.D., Richards, R.R., & An, K.N. ( 1992). The relationship between wrist position, grasp size, and grip strength. Journal of Hand Surgery, 17, 169-177.
35.
Pheasant, S., & O’Neill, D. (1975). Performance in gripping and turning: A study in hand/handle effectiveness. Applied Ergonomics, 6, 205-208.
36.
Rajulu, S.L., & Klute, G.K. ( 1993). A comparison of hand grasp breakaway strengths and bare-handed grip strengths of the astronauts, SML III test subjects, and the subjects from the general population (NASA Technical Paper 3286). Washington, DC: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program.
37.
Seo, N.J., Armstrong, T.J., Ashton-Miller, J.A., & Chaffin, D.B. ( 2007). The effect of torque direction and cylindrical handle diameter on the coupling between the hand and a cylindrical handle. Journal of Biomechanics, 40, 3236-3243.
38.
Seo, N.J., Armstrong, T.J., Chaffin, D.B., & Ashton-Miller, J.A. (2008). The effect of handle friction and inward or outward torque on maximum axial push force. Human Factors, 50, 227-236.
39.
Stegink Jansen, C.W., Niebuhr, B.R., Coussirat, D.J., Hawthorne, D., Moreno, L., & Phillip, M. ( 2008). Hand force of men and women over 65 years of age as measured by maximum pinch and grip force. Journal of Aging and Physical Activity, 16, 24-41.
40.
Tsaousidis, N., & Freivalds, A. ( 1998). Effects of gloves on maximum force and the rate of force development in pinch, wrist flexion and grip. International Journal of Industrial Ergonomics, 21, 353-360.
41.
Yoxall, A., & Janson, R. ( 2008). Fact or fiction: A model for understanding the openability of wide mouth closures. Packaging Technology and Science, 21, 137-147.
42.
White, R.M. ( 1980). Comparative anthropometry of the hand. U.S. Army Research and Development Command, Natick, Massachusetts Technical Report NATICK/TR-81/010 (AD A101070). Retrieved October 30, 2009, from http://handle.dtic.mil/100.2/ADA101070
