Development of remote monitoring and control system for mechatronics engineering practice: The case of flexible manufacturing system

Abstract

The purpose of this study is to design a test set with remote access so that it can be used in laboratory applications in a multidisciplinary engineering education. The test set equipment used in the study consists of work stations that belong to the flexible manufacturing system, which is designed by the Festo Didactic Company. The flexible manufacturing system is a didactic set for mechatronics training. It can be used with different configurations and training purposes. In this study, the flexible manufacturing system set has nine work stations with different functions from each other. These stations such as distributing, testing, processing, handling, sorting, etc. can be worked alone and together with several assembly line configurations. In the developed didactic model, the existing equipment of the system such as mechanical and electrical infrastructure was used. Control of all the stations was realized by designing PIC 18F4580 and 18F2585 microcontrollers-based hardware. Control area network was used as the communication protocol between the work stations of the flexible manufacturing system. Online monitoring and real-time control operations for all parameters of the designed system were performed over the software which was developed using the LabVIEW program. Users who are connected to the system via the Internet can control the system using the designed LabVIEW-based software. Furthermore, they can upload–download their programs which will be written by them to the system via the Internet, and they can see the results of their own operational scenarios. Thus, the system with its developed structure is not restricted to existing operational scenarios for students. Hence, it has gained flexibility by allowing students to try their programs remotely. Also, in order to obtain feedback about the designed structure of the didactic system, a survey, conducted on 29 engineering students, was realized. The presented structure of the mechatronic didactic system was found to be successful by the students who joined the survey.

Keywords

Engineering education mechatronics flexible manufacturing system remote laboratory control and automation LabVIEW

Get full access to this article

View all access options for this article.

References

Erten

. A conversation on mechatronics engineering. J Assoc Elect Eng(In Turkish) 2003, pp. 419.

Bassily

Sekhon

Butts

. A mechatronics educational laboratory—programmable logic controllers and material handling experiments. Mechatronics 2007; 17: 480–488.

Akpinar

. Mechatronics education in Turkey. Mechatronics 2006; 16: 185–192.

Hargrove

. Curriculum, equipment and student project outcomes for mechatronics education in the core mechanical engineering program at Kettering University. Mechatronics 2002; 12: 343–356.

Siegwart

. Grasping the interdisciplinarity of mechatronics. Robot Automat Mag IEEE 2001; 8: 27–34.

Ranaweera

Bamieh

Parmenter

. Sensors, actuators, and computer interfacing laboratory course at the University of California at Santa Barbara. Mechatronics 2005; 15: 639–650.

Furman

Hayward

. Asynchronous hands-on experiments for Mechatronics education. Mechatronics 2002; 12: 251–260.

Rojko

Hercog

Jezernik

. E-training in mechatronics using innovative remote laboratory. Math Comput Simul 2011; 82: 508–516.

Lee

. Investigation of mechatronic education in South Korea. Mechatronics 2010; 20: 341–345.

10.

Lima

Gomes

Putnik

. Mechatronics education at the University of Minho: a summary of the present; perspectives for the future. Mechatronics 2002; 12: 295–302.

11.

Meek

Field

Devasia

. Mechatronics education in the Department of Mechanical Engineering at the University of Utah. Mechatronics 2003; 13: 1–11.

12.

Giurgiutiu

Lyons

Rocheleau

. Mechatronics/microcontroller education for mechanical engineering students at the University of South Carolina. Mechatronics 2005; 15: 1025–1036.

13.

Saygın

Kahraman

. A web-based programmable logic controller laboratory for manufacturing engineering education. Int J Adv Manufac Technol 2004; 24: 590–598.

14.

Cho JM, Choi SI, Lee DK, et al. A flash-based multimedia interactive tutoring system for distance education of biomedical engineering students: new approach to teaching microcontroller-based systems. In: Proceedings of the 25th annual international conference of the IEEE Engineering in Medicine and Biology Society, 17–21 September 2003, 2003, pp. 3540–3543.

15.

Bellmunt

Miracle

Arellano

. A distance PLC programming course employing a remote laboratory based on a flexible manufacturing cell. IEEE Trans Educ 2006; 49: 278–284.

16.

Sanchez

Dormido

Pastor

. A Java/Matlab-based environment for remote control system laboratories: illustrated with an inverted pendulum. IEEE Trans Educ 2004; 47: 321–329.

17.

Stefanovic

Cvijetkovic

Matijevic

. A LabVIEW-based remote laboratory experiments for control engineering education. Comput Appl Eng Educ 2011; 19: 538–549.

18.

Aydogmus

. A web-based remote access laboratory using SCADA. IEEE Trans Educ 2009; 52: 126–132.

19.

Yeung

Huang

. Development of a remote-access laboratory: a dc motor control experiment. Comput Indus 2003; 52: 305–311.

20.

Vicente

Muñoz

Galilea

JLL

. Remote automation laboratory using a cluster of virtual machines. IEEE Trans Indus Electron 2010; 57: 3276–3283.

21.

Tzafestas

Palaiologou

Alifragis

. Virtual and remote robotic laboratory: comparative experimental evaluation. IEEE Trans Educ 2006; 49: 360–369.

22.

Ferrater-Simon

Molas-Balada

Gomis-Bellmunt

. A remote laboratory platform for electrical drive control using programmable logic controllers. IEEE Trans Educ 2009; 52: 425–435.

23.

Festo Didactic GmbH & Co. August, 2003.

24.

Microchip Technology Inc. PIC18F2480/2580/4480/4580 Data Sheet, 2007.