Understanding the Compressive Behavior of Linear and Cross-linked Poly(vinyl chloride) Foams

Abstract

The work reported in this article was initiated by the IUPAC Subcommittee ‘Structure and Properties of Commercial Polymers’ to study the ‘Structure and properties of linear and cross-linked structural poly(vinyl chloride) (PVC) foams’, and intends in particular to give a good understanding of the compressive response of these PVC foams with various foam densities. From a careful review of chemical reactions of polymeric methylene diphenyl diisocyanate [a mixture of 4,4'-methylene-bis(phenyl-isocyanate) and oligomeric isocyanates] with water or phthalic acid, it is known from the material supplier that a semi-interpenetrating polymer network of polyureas and/or polyamides is formed by cross-linking. The amide groups in these polymers are hydrophilic and can affect the overall mechanical response of PVC foams, especially under water. Scanning electron microscopy is used to study the morphology of linear and cross-linked foams and their heterogeneous foam deformation. Compression testing of these PVC foams is conducted in air and water, and illustrates the influence of foam density and cross-linking. Correlation of compressive testing of foams with the corresponding cross-linked PVC bulk materials suggests that elastic collapse of cells during compression may be linked to strain-softening of the corresponding bulk material. Finally, new predictive models are adopted for the PVC foams to give reasonable estimates of their compressive modulus and yield strength.

Keywords

PVC foam cross-linking compression predictive model.

Get full access to this article

View all access options for this article.

References

Klempner, H. and Sendijarevic, V. ( 2004). Polymeric Foams and Foam Technology, München, Hanser Verlag.

Wang, Y. and Cuitino, A.M. ( 2002). Full-field Measurements of Heterogeneous Deformation Patterns on Polymeric Foams Using Digital Image Correlation, Int. J. Solids Struct., 39: 3777-3796.

Han, X.M. , Koelling, K.W. , Tomasko, D.L. and Lee , L.J. (2003). Effect of Die Temperature on the Morphology of Microcellular Foams, Polym . Eng. Sci. , 43: 1206-1220.

Ramsteiner, F. , Fell, N. and Forster, S. (2001). Testing the Deformation Behaviour of Polymer Foams, Polym. Test., 20: 661-670.

Park, C.B. and Cheung, L.K. ( 1997). A Study of Cell Nucleation in the Extrusion of Polypropylene Foams, Polym. Eng. Sci., 37: 1-10.

Widya, T. and Macosko, C.W. ( 2005). Nanoclay-modified Rigid Polyurethane Foam, J. Macromol. Sci., Part B, 44: 897-908.

Viana, G.M. and Carlsson, L.A. ( 2002). Mechanical Properties and Fracture Characterization of Cross-linked PVC Foams, J. Sandwich Struct. Mater., 4: 99-113.

Saha, M.C. , Mahfuz, H. , Chakravarty, U.K. , Kabir, M.E. and Jeelani, S. ( 2005). Effect of Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric Foams, Mater. Sci. Eng. A, 406: 328-336.

Kabir, M.E. , Saha, M.C. and Jeelani, S. ( 2006). Tensile and Fracture Behavior of Polymer Foams, Mater . Sci. Eng. A, 429: 225-235.

10.

Taki, K. , Nitta, K. , Kihara, S. and Ohshima, M. ( 2005). CO2 Foaming of Poly(ethylene glycol)/Polystyrene Blends: Relationship of the Blend Morphology, CO2 Mass Transfer, and Cellular Structure , J. Appl. Polym. Sci., 97: 1899-1906.

11.

Shishesaz, M.R. and Hornsby , P.R. (1993). Structural Characterization of Extruded Polyolefin Foams Made Using a Chemical Expansion System, Cell . Polym., 12: 275-302.

12.

Gibson, L.J. and Ashby, M.J. ( 1997). Cell. Solids: Struct. Prop., 2nd edn, Cambridge, Cambridge University Press.

13.

Weaire, D. and Phelan, R. ( 1994). A Counter-example to Kelvin’s Conjecture on Minimal Surfaces, Philos. Mag. Lett., 69: 107-110.

14.

Ulrich, H. ( 1996). Chemistry and Technology of Isocyanates, Chichester, John Wiley & Sons.

15.

Kumar, V. and Suh, N.P. ( 1990). A Process for Making Microcellular Thermoplastic Parts, Polym. Eng. Sci., 30: 1323-1329.

16.

Lakes, R. ( 1993). Materials with Structural Hierarchy, Nature, 361: 511-515.

17.

Beer, F.P. , Johnston, J.E.R. and Dewolf, J.T. ( 2002). Mech. Mater., 3rd edn, Boston, McGraw-Hill.

18.

Simone, A.E. and Gibson, L.J. ( 1998). The Effects of Cell Face Curvature and Corrugations on the Stiffness and Strength of Metallic Foams, Acta Mater., 46: 3929-3935.