A simple multiscale model was developed and used to predict gas diffusivities through expanded polystyrene foam at near standard temperature and pressure conditions. The technique involves measuring gas diffusivities at various length scales then combining them using an electrical analogy for parallel resistances to construct an effective property. A commonly used experimental technique, the continuous flow method, was used to obtain diffusivity data for argon through polystyrene films and foams. Although a simple Fickian mathematical model was able to predict diffusivities through films, a simple ‘coarse’ multiscale model that accounts for the morphological features was developed for the foam.
Bates, C.E., Griffin, J. and Littleton, H. ( 1994). Expendable Pattern Casting-Process Manual, Des Plaines, IL, AFS Publication, Vol. 1.
2.
Pilon, L., Fedorov, A.G. and Viskanta, R.Gas Diffusion in Closed Cell Foams, J. Cell. Plast., 2000: 36: 451-474.
3.
Currie, K., Walford, G., Abdelrahman, M., Vondra, F. and Renfro, M.A Flask and Methodology for Lost Foam Casting Under a Controlled Environment , AFS Trans., 2005: 05-10: 1-8.
4.
Walford, G.V., Frafjord, J.J. and Dekanvich, S.P. ( 2008). Use of Infrared Imaging Techniques to Understand and Quantify Expanded Polymer Molding Operations and Part Quality, In: Inframation Proceedings, ITC 126 A, Reno Nevada .
5.
Dhingra, S.S. ( 1997). Mixed Gas Transport Study Through Polymeric Membranes: A Novel Technique, PhD Dissertation, Virginia Polytechnic Institute and State University.
6.
Haraya, K. and Hwang, S.T.Permeation of Oxygen, Argon and Nitrogen Through Polymer Membranes, J. Membr. Sci., 1992: 71: 13-27.
7.
Ganesh, K., Nagarajan, R. and Duda, J.L.Rate of Gas Transport in Glassy Polymers: A Free Volume Based Predictive Model , Ind. Eng. Chem. Res., 1992: 31: 746-755.
8.
Bondi, A.van der Waals Volumes and Radii, J. Phys. Chem., 1964: 68: 441-451.
9.
Lee, W.M.Selection of Barrier Materials from Molecular Structure, Polym. Eng. Sci., 1980: 20: 65-69.
10.
Booth, J.R. and Holstein, T.J.Determination of Effective Diffusion Coefficients of Nitrogen in Extruded Polystyrene Foam by Gravimetric Sorption, J. Therm. Insul. Build. Envelopes, 1993: 16: 246-262.
11.
Pasternak, R.A., Schimscheimer , J.F. and Heller, J.A Dynamic Approach to Diffusion and Permeation Measurements, J. Polym. Sci., 1970: 8: 467-479.
12.
Felder, R.M. , Spence, R.D. and Ferrell, J.K.A Method for the Dynamic Measurement of Diffusivities of Gases in Polymers, J. Appl. Polym. Sci., 2003: 19: 3193-3200.
13.
Aminabhavi, T.M., Aithal, U.S. and Shukla, S.S.An Overview of the Theoretical Models Used to Predict Transport of Small Molecules through Polymer Membranes, Macromol. Chem. Phys., 1988: C28: 421-474.
14.
Gendron, R. ( 2005). Thermoplastic Foam Processing: Principles and Development , New York, CRC Press LLC.
15.
Alsoy, S.Modeling of Diffusion in Closed Cell Polymeric Foams, J. Cell. Plast., 1999: 35: 247-271.
16.
Cuddihy, E.F. and Moacanin, J.Diffusion of Gases in Polymeric Foams, J. Cell. Plast., 1967: 3: 73-80.
17.
Mehta, B.S. and Colombo, E.A. ( 1978). Gaseous Diffusion and Permeation in Closed Cell Polymeric Foams, In: Society of Plastics Engineers, Annual National Technical Conference, Washington D.C., Vol. 24, pp. 689-692.
18.
Svanstrom, M. , Ramnas, O., Olsson, M. and Jarfelt, U.Determination of Effective Diffusion Coefficients in Rigid Polyurethane Foam, Cell. Polym., 1997: 16: 182-193.
19.
Norton, F.J.Diffusion of Chlorofluorocarbon Gases in Polymer Films and Foams, J. Cell. Plast., 1982: 18: 300-318.
20.
Crank, J. ( 1975). The Mathematics of Diffusion, London , Oxford University Press.
21.
Ostrogorsky, A.G. and Glicksman , I.R.Electrical Analogy of Gas Diffusion in Closed-Cell Foams, J. Cell. Plast., 1988: 24: 215-231.
22.
Reid, R.C., Prausnitz, J.M. and Sherwood, T.K. ( 1977). The Properties of Gases and Liquids, New York City, New York, McGraw-Hill Book Company.
23.
Durrill, P. and Griskey, R.Diffusion and Solution of Gases in Thermally Softened or Molten Polymers, AIChE J., 1966: 12: 1147-1151.
