Volatile-Induced Void Formation in Amorphous Thermoplastic Polymeric Materials: I. Modeling and Parametric Studies

Abstract

Void formation in polymeric materials is of critical importance in a wide range of process technologies such as composites manufacturing, polymer devolatilization and foam molding. A predictive model for volatile-induced void formation and growth during the processing of thermoplastic polymeric materials is presented. This model is comprehensive, incorporating the effect of material properties, such as surface tension and moisture solubility and diffusivity in these materials, and processing conditions and part thickness on the spatial nucleation and growth of voids. Fickian diffusion of volatiles during polymer processing provides concentration profiles that are coupled with classical nucleation theory to predict nucleation density through the part thickness as a function of process temperature, heating rate and applied pressure. Void growth is predicted at each material point based on local vapor pressure, material properties and process conditions. Parametric studies to elucidate the effect of various processing parameters and material properties on moisture-driven Void Formation in Amorphous Thermoplastic Polymeric Materials: I 341 void formation are conducted for amorphous thermoplastic engineering polymers such as polyetherimide (PEI). Further, the role of material and processing parameters in the generation of a spatial distribution of void content within the part being processed is also demonstrated.

Keywords

voids nucleation growth polymer processing

Get full access to this article

View all access options for this article.

References

1. S. Roychowdhury , J. W. Gillespie, Jr. and S. G. Advani , Proceedings of Third International Conference on Computer Aided Design in Composite Material Technology, Computational Mechanics Institute Conference, Newark, DE, USA, 89-89 (1992).

2. S. Roychowdhury, Ph.D. Dissertation, Materials Science and Engineering, University of Delaware, Newark, DE (1995).

3. T. J. Jarvis , M. D. Donohue and J. L. Katz , J. Colloid and Interf. Sci., 50, 359-359 (1975).

4. M. Blander and J. L. Katz , AIChE J., 21, 833-833 (1975).

5. S. K. Goel and E. J. Beckman , Cellular Polymers, 12, 251-251 (1993).

6. J. H. Han and C. D. Han , J. of Polym. Sci., Part B: Polym. Phys., 28, 743-743 (1990).

7. J. S. Colton and N. P. Suh , Polym. Eng. Sci., 27, 485-485 (1987).

8. J. S. Colton and N. P. Suh , Polym. Eng. Sci., 27, 500-500 (1987).

9. V. P. Skripov and E. I. Blednykh , Doklady Akademi Nauk, 323, 326-326 (1992).

10.

10. S. T. Lee and J. A. Biesenberger , Polym. Eng. Sci., 29, 782-782 (1989).

11.

11. S. T. Lee , N. S. Ramesh and G. A. Campbell , Proceedings of SPE ANTEC ’93, 3033-3033 (1993).

12.

12. S. T. Lee , J. Cellular Plast., 30, 444-444 (1994).

13.

13. V. Kumar and J. E. Weller , Proceedings of SPE ANTEC ’91, 1401-1401 (1991).

14.

14. C. W. Stewart , J. of Polym. Sci., A-2, 8, 937-937 (1970).

15.

15. J. R. Youn and N. P. Suh , Polym. Comp., 6, 175-175 (1985).

16.

16. K. Joshi , M. A. Shafi and F. W. Flumerfelt , Proceedings of the First International Conference of Transport Phenomena in Processing, Honolulu, Hawaii, 879-879 (1992).

17.

17. J. A. Kweeder , N. S. Ramesh , G. A. Campbell and D. H. Rasmussen , Proceedings of SPE ANTEC ’91, 1398-1398 (1991).

18.

18. R. J. Albalak , Z. Yadmar and Y. Talmon , AIChE J., 36, 1313-1313 (1990).

19.

19. Lord Rayleigh , Phil. Mag., 6th Ser., 34-34 (1917).

20.

20. H. K. Forster and N. J. Zuber , J. Appl. Phys., 25, 474-474 (1954).

21.

21. P. Dergarabedian , J. Appl. Mech., 20, 537-537 (1953).

22.

22. P. Dergarabedian , J. Fluid Mech., 9, 39-39 (1960).

23.

23. R. S. Margulies , G. Birkhoff and W. A. Horning , Physics of Fluids, 3, 201-201 (1958).

24.

24. L. E. Scriven , Chem. Eng. Sci., 10, 1-1 (1959).

25.

25. E. J. Barlow and W. E. Langlois , IBM Journal, 6, 329-329 (1962).

26.

26. M. S. Plesset and S. A,. Zwick , J. Appl. Phy., 25, 493-493 (1954).

27.

27. M. Cable and J. R. Frade , J. Mat. Sci., 22, 149-149 (1987).

28.

28. R. D. Patel , Chem. Eng. Sci., 35, 2356-2356 (1980).

29.

29. J. Szekely and G. P. Martins , Chem. Eng. Sci., 26, 147-147 (1971).

30.

30. M. Amon and C. D. Denson , Polym. Eng. Sci., 26, 255-255 (1986).

31.

31. M. Amon, Ph.D. Dissertation, Chemical Engineering, University of Delaware, Newark, DE(1982).

32.

32. A. Arefmanesh , S. G. Advani and E. E. Michaelides , Int. J. Heat and Mass Trans., 35, 1711-1711 (1992).

33.

33. A. Arefmanesh, Ph.D. Dissertation, Mechanical Engineering, University of Delaware, Newark, DE (1991).

34.

34. S. G. Advani , Chapter 10 in Advances in Transport Processes, R. A. Mashelkar and A. Muzumdar , eds. (1994).

35.

35. A. Arefmanesh and S. G. Advani , Polym. Eng. Sci., 35, 252-252 (1995).

36.

36. R. C. Progelhof and J. L. Throne , Polymer Engineering Principles—Properties, Processes and Tests for Design, Hanser, New York (1993).