The deformation and failure of fused, porous networks are key concerns in microscale power sources and open trusses for structural applications. We have found that the behavior of the connection points in these open networks is the most critical determinant of materials response. For many manufacturable material geometries, both stiffness and strength are largely controlled by these interparticle or interelement bonds, rather than by the response of the longer aspect ratio sections. Classic work in sintered materials is of limited applicability in this context, since formation of multiphase porous networks often involves volume-conserving interconnects, or fused sections created by additional material, rather than via (heated) compaction of particles or elements. Here we expand on previous work in 2D network behavior (reviewed in [1]) by focusing on the geometry and response of 3D interconnects between cylindrical elements. We present computational results for deformation of 3D interconnects in a large class of stochastic fibrous and particulate structures. Further, we suggest methodologies for adapting tractable 2D simulations to account for the known 3D stress-enhancing effects. We conclude with some comments on limiting strengths and toughnesses in these materials, and suggest divisions for classifications of these porous network bonds.
1. Sastry, A.M., Wang, C.-W. and Berhan, L. (2001). Deformation and Failure in Stochastic Fibrous Networks: Scale, Dimension and Application, Key Engineering Materials, Vol. 200, pp. 229–250, Trans Tech Publications, Switzerland.
2.
2. Sastry, A.M., Cheng, X. and Wang, C.W. (1998). Mechanics of Stochastic Fibrous Networks, Journal of Thermoplastic Composite Materials, 11(3): 288–296.
3.
3. Cheng, X. and Sastry, A.M. (1999). On Transport in Stochastic, Heterogeneous Fibrous Domains, Mechanics of Materials, 31: 765–786.
4.
4. Cheng, X., Sastry, A.M. and Layton, B.E. (2001). Transport in Stochastic Fibrous Networks, Journal of Engineering Materials and Technology, 123: 12–19.
5.
5. Cheng, X., Wang, C., Sastry, A.M. and Choi, S.B. (1999). Investigation of Failure Processes in Porous Battery Substrates: Part II–Simulation Results and Comparisons, Journal of Engineering Materials and Technology, 121: 514–523.
6.
6. Wang, C.W., Berhan, L. and Sastry, A.M. (2000). Structure, Mechanics and Failure of Stochastic Fibrous Networks: Part I–Microscale Considerations, Journal of Engineering Materials and Technology, 122: 450–459.
7.
7. Wang, C., Cheng, X., Sastry, A.M. and Choi, S.B. (1999). Investigation of Failure Processes in Porous Battery Substrates: Part I–Experimental Findings, Journal of Engineering Materials and Technology, 121: 503–513.
8.
8. Wang, C.W. and Sastry, A.M. (2000). Structure, Mechanics and Failure of Stochastic Fibrous Networks: Part II–Network Simulations and Application, Journal of Engineering Materials and Technology, 122: 460–468.
9.
9. Lu, W., Carlsson, L.A. and Andersson, Y. (1995). Micro-Model of Paper Part 1: Bounds on Elastic Properties, Tappi Journal, 78(12): 155–164.
10.
10. Lu, W. and Carlsson, L.A. (1996). Micro-Model of Paper Part 2: Statistical Analysis of the Paper Structure, Tappi Journal, 79(1): 203–210.
11.
11. Lu, W., Carlsson, L.A. and de Ruvo, A. (1996). Micro-Model of Paper Part 3: Mosaic Model, Tappi Journal, 79(2): 197–205.
12.
12. Taya, M. and Ueda, N. (1987). Prediction of the In-Plane Electrical Conductivity of a Misoriented Short Fiber Composite: Fiber Percolation Model Versus Effective Medium Theory, Journal of Engineering Materials and Technology, 109: 252–256.
13.
13. Sastry, A.M., Choi, S.B. and Cheng, X. (1998). Damage in Composite NiMH Positive Electrodes, Journal of Engineering Materials and Technology, 120: 280–283.
14.
14. Wang, C.W., Cook, K.A. and Sastry, A.M. (2003). Conduction in Multiphase Particulate/Fibrous Networks: Simulations and Experiments on Li-ion Anodes, Journal of the Electrochemical Society, 150(3): A385–A397.
15.
15. Kuczynski, G.C. (1949). Self-diffusion in Sintering of Metallic Particles. Transactions of the American Institute of Mining and Metallurgical Engineers, 185: 169–178.
16.
16. German, R.M. (1996). Solid State Sintering Fundamentals, Sintering Theory and Practice, pp. 68–72, John Wiley and Sons, Inc. Publication, New York.
17.
17. Siddiqui, F.M.A. and Beseler, J.W. (1989). Stress Concentration Factors in Angled Flexural Members of Rectangular Cross-Section, Journal of Vibration, Acoustics, Stress, and Reliability in Design, 111: 490–491.
18.
18. Skopinsky, V.N. (1993). Numerical Stress Analysis of Intersecting Cylindrical Shells, Journal of Pressure Vessel Technology, 115: 275–282.
19.
19. Pilkey, W.D. (1997). Shoulder Fillets, Peterson’s Stress Concentration Factors, 2nd Edn., pp. 135–174, Wiley-Interscience Publication, New York.
20.
20. Roark, R.J. (1965). Miscellaneous Tables, Formulas for Stress and Strain, pp. 382–422, McGraw-Hill Publication, New York.
21.
21. Eringen, A.C. and Suhubi, E.S. (1965). Stress Distribution at Two Normally Intersecting Cylindrical Shells, Nuclear Structural Engineering, 2: 235–270.
22.
22. Bijlaard, P.P., Dohrmann, R.J. and Wang, I.C. (1967). Stresses in Junction of Nozzle to Cylindrical Pressure Vessel for Equal Diameter of Vessel and Nozzle, Nuclear Engineering and Design, 5: 349–365.
23.
23. Hansberry, J.W. and Jones, N. (1969). A Theoretical Study of Elastic Behavior of Two Normally Intersecting Cylindrical Shells, Journal of Engineering for Industry, 91(3): 563–572.
24.
24. Xue, M.D., Chen, W. and Hwang, K.C. (1994). Stresses at the Intersection of Two Cylindrical Shells, Nuclear Engineering and Design, 154: 231–238.
25.
25. Khan, A.S. and Hsiao, C. (1984). Strain Field in Straight Cylindrical Shells due to Applied Forces on the Attached Shell. Part I: No Hole In The Intersection Region, Journal of Strain Analysis, 19(4): 269–274.
26.
26. Ma, A. and Sharp, J.V. (1997). Fatigue Design of Cast Steel Nodes in Offshore Structures Based on Research Data, In: Proceedings of the Institution of Civil Engineers-Water Maritime and Energy, 124(2): 112–126.
27.
27. Bathe, K.-J. (1996). Formulation and Calculation of Isoparametric Finite Element Matrices, Finite Element Procedures, pp. 369–371, Prentice Hall Publication, Englewood Cliffs, New Jersey.
28.
28. Cook, R.D., Malkus, D.S. and Plesha, M.E. (1989). Topics in Structural Mechanics, Concepts and Applications of Finite Element Analysis, pp. 248–250, John Wiley and Sons, Inc. Publication, New York.
29.
29. Panagiotopoulos, G.D. (1984). A Finite Element Procedure for the Stress Analysis of Tubular Joint Connections, International Journal for Numerical Methods in Engineering, 23: 317–329.
30.
30. Wang, C.M., Reddy, J.N. and Lee, K.H. (2000). Bending of Beams, Shear Deformable Beams and Plates: Relationships with Classical Solutions, pp. 17–20, Elsevier Science Publication, Oxford.
31.
31. Shigley, J.E. and Mischke, C.R. (1989). Deflection and Stiffness, Mechanical Engineering Design,p. 111-111, McGraw-Hill Publication, New York.
32.
32. Timoshenko, S.P. and Gere, J.M. (1972). Shear Deflection in Beams, Mechanics of Materials,p. 372-372, Van Nostrand Reinhold Company Publication, New York.
33.
33. Hutchinson, J.R. (2001). Shear Coefficients for Timoshenko Beam Theory, Journal of Applied Mechanics, 68(1): 87–92.
34.
34. Pai, P.F. and Schulz, M.J. (1999). Shear Correction Factors and An Energy-Consistent Beam Theory, International Journal of Solids and Structures, 36(10): 1523–1540.
35.
35. Ashby, M.F. (1987). Technology of the 1990s: Advanced Materials and Predictive Design, Philosophical Transactions of the Royal Society of London A, 322(1567): 393–403.
36.
36. Reddy, J.N. (1997). Classical and First Order Laminate Theories, Mechanics of Laminated Composite Plates, pp. 161–164, CRC Press Publication, Boca Raton.
37.
37. Bert, C.W. (1973). Simplified Analysis of Static Shear Factors for Beams of Nonhomogeneous Cross Section, Journal of Composite Materials, 7: 525–529.
38.
38. Whitney, J.M. (1973). Shear Correction Factors for Orthotropic Laminates Under Static Load, Journal of Applied Mechanics, 40: 302–304.
39.
39. Ahn, S. (1998). High Capacity, High Rate Lithium-Ion Battery Electrodes Utilizing Fibrous Conductive Additives, Electrochemical and Solid-State Letters, 1(3): 111–113.
40.
40. Sypeck, D.J. and Wadley, H.N.G. (2001). Cellular Metal Truss Core Sandwich Structures, In: Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), pp. 381–386, MIT-Verlag, Bremen.
41.
41. Yao, Z., Postma, H.W.C., Balents, L. and Dekker, C. (1999). Carbon Nanotube Intramolecular Junctions, Nature, 402, 273–276.
42.
42. Banhart, F. (2001). The Formation of a Connection between Carbon Nanotubes in an Electron Beam, Nano Letters, 1(6): 329–332.
43.
43. Terrones, M., Banhart, F., Grobert, N., Charlier, J.-C., Terrones, H. and Ajayan, P.M. (2002). Molecular Junctions by Joining Single-Walled Carbon Nanotubes, Physical Review Letters, 89(7): article number 075505.
44.
44. Nikolaev, P., Bronikowski, M.J., Bradley, R.K., Rohmund, F., Colbert, D.T., Smith, K.A. and Smalley, R.E. (1999). Gas-Phase Catalytic Growth of Single-Walled Carbon Nanotubes from Carbon Monoxide, Chemical Physics Letters, 313: 91–97.
