S2-Glass/Epoxy Polymer Nanocomposites: Manufacturing,Structures,Thermal and Mechanical Properties

Abstract

This paper is primarily focused in studying the effects of nanoclay particles such as montmorillonite on improving mechanical and thermal properties of fiber reinforced polymer matrix composite materials. Basic correlations between polymer morphology, strength, modulus, toughness, and thermal stability of thermoset nanocomposites were investigated as a function of layered silicate content. S2-glass/epoxy-clay nanocomposites were manufactured through an affordable vacuum assisted resin infusion method (VARIM). The nanocomposites are formed during polymerization when the adsorbing monomer separates the clay particles into nanometer scales. Transmission electron microscopy (TEM) and wide angle X-ray diffraction(WAXD) were used to characterize the morphology of the dispersed clay particles. The thermal properties such as onset of decomposition and glass transition temperatures were determined by Thermo Gravimetric Analysis (TGA) and Dynamic Modulus Analyzer (DMA). Mechanical properties such as interlaminar shear strength, flexural properties and fracture toughness are also determined for both conventional S2-glass/epoxy composites and S2-glass fiber reinforced nanocomposites.

The results show significant improvements in mechanical and thermal properties of conventional fiber reinforced composites with low loading of organo silicate nanoparticles. By dispersing 1% by weight nanosilicates, S2-glass/epoxy-clay nanocomposites attributed to almost 44, 24 and 23% improvement in interlaminar shear strength, flexural strength and fracture toughness in comparison to conventional S2-glass/epoxy composites. Similarly, the nanocomposites exhibit approximately 26 C higher decomposition temperatures than that of conventional composites. This improved properties of fiber reinforced polymer nanocomposites are achieved mostly due to increased interfacial surface areas, improved bond characteristics and intercalated/exfoliated morphology of the epoxy-clay nanocomposites. The TEM observations provide evidence of detailed morphology of the polymer layered-clay nanocomposites.

Get full access to this article

View all access options for this article.

References

1. Alexander, M. and Dubois, P. (2000). Polymer-layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials , Materials Science & Engineering, 28: 1-63 .

2. Morgan, A., Gilman, J.Kashiwagi, T. and Jackson, C. (2000). Flammability of Polymer-Clay Nanocomposites , In: Proceedings of Fire Safety Developments, Non-Halogen FR's, Standards and Regulations, National Institute of Standards and Technology, pp. 25-39 , March 12-15, Washington.

3. Lagly, G. (1999). Introduction: From Clay Mineral-Polymer Interactions to Clay Mineral-Polymer Nanocomposites , Applied Clay Sci, p. 15 .

4. Wang, Z and Pinnavaia, T. (1998). Hybrid Organic-Inorganic Nanocomposites: Exfoliation of Magadiite Nanolayers in an Elastomeric Epoxy , Chem. Mater, 10: 1820-1826 .

5. Novak, B.M. (1993). Advanced Materials, 5: 422 .

6. Giannelis, E.P. (1992). New Strategy for Synthesizing Polymer-Ceramic Nanocomposites , J. Minerals, Metals & Materials Soc, 44(3): 28-30 .

7. Kormann, X., Lindberg, H. and Berglund, L.A. (2001). Synthesis of Epoxy-Clay Nanocomposites: Influence of the Nature of the Clay on the Structure , Polymer, 42: 1303-1310 .

8. Chen, C. and Curliss, D. (2001). Resin Matrix Composites: Organoclay-Aerospace Epoxy Nanocomposites: Influence of the Nature of the Clay on the Structure , Polymer, 42: 1303-1310 .

9. Usuki, A., Kawasumi, M., Kozima, Y. and Okada, A.J. (1993). Material. Res., 8: 1174 .

10.

10. Fisher, H., Gielgens, L. and Koster, T. (1998). Nanocomposites from Polymers and Layered Minerals: TNO-TPD Report.

11.

11. Le Beron, P.C., Wang, Z. and Pinnavia, T.J. (1999). Applied Clay Science, 15: 11 .

12.

12. Okada, A. and Usuki, A. (1995). The Chemistry of Polymer-Clay Hybrid , Materials Science and Engineering, C3: 109-115 .

13.

13. Messersmith, B. Phillip and Giannelis, P. Emmanuel, (1994). Synthesis and Characterizationof Layered Silicate-Epoxy Nanocomposites , Chem. Mater. pp. 1719-1725 .

14.

14. Agarwal, B.D. and Broutman, J.L. (1980). Analysis and Performance of Fiber Composites, John Wiley and Sons, New York, USA .