Modeling of Heat Transfer and Void Dynamics for the Thermoplastic Composite Tow-Placement Process

Abstract

Thermoplastic composite tow-placement technology is a nonautoclave consolidation process that offers the potential to significantly reduce fabrication costs by using in situ consolidation as a method for manufacturing large composite components. The temperature history and resulting degree of consolidation directly control the final part quality and are directly affected by the process set points. In this work, series of integrated submodels are developed for predicting the heat transfer and void dynamics within the laminate. The final through thickness void fraction is predicted as a function of process parameters. Experiments are carried out to validate these results for a wide variety of process conditions.

The model is used to quantify the relationships between variation of quality of incoming material (e.g., void content ranges 3.1 and 5.5% and final void content gradients. It was found that significant gradients in final void content exist through the thickness and is directly related to processing conditions. Recommendations for process optimization are discussed.

Get full access to this article

View all access options for this article.

References

1. Benjamin, W.P. (1998). The Fiber Placement Path Toward Affordability , SAMPE Journal, 34(3).

2. Beyeler, E., Philips, W. and Güçeri, S.I. (1998). Experimental Investigation of Laser-Assisted Thermoplastic Tape Consolidation , Journal of Thermoplastic Composite Materials, 1: 107-121 .

3. Beyeler, E.P. and Güçeri, S.I. (1998). Thermal Analysis of Laser-Assisted Thermoplastic-Matrix Composite Tape Consolidation , ASME Journal of Heat Transfer, 110: 424-430 .

4. Mazumdar, S.K. and Hoa, S.V. (1993). Experimental Determination of Process Parameters for Laser Assisted Processing of PEEK/Carbon Thermoplastic Composites , 38th International SAMPE Symposium, pp. 189-203 .

5. Werdermann, C., Friedrich, K., Cirino, M. and Pipes, R.B. (1989). Design and Fabrication of an On-Line Consolidation Facility for Thermoplastic Composites , Journal of Thermoplastic Composite Materials, 2: 293-306 .

6. Haupert, F., Chen, C. and Friedrich, K. (1995). Manufacturing of Thermoplastic Composite Parts by Combined Filament Winding and Injection Molding , Proc. ICCM 10, Canada.

7. Benatar, A. and Gutowski, T.G. (1987). A Review of Methods for Fusion Bonding Thermoplastic Composites , SAMPLE Journal, 23: 33-39 .

8. Bullock, D.E. and Boyce, J. (1994). On-Line Consolidation of Thermoplastic Matrix Composite Tape Using Ultrasonic Heating , 39th International SAMPE Symposium, pp. 1500-1506 .

9. Felderhoff, K.D. and Steiner, K.V. (1993). A New Compact Robotic Head for Thermoplastic Fiber Placement , 38th International SAMPLE Symposium, pp. 138-151 .

10.

10. Pitchumani, R., Don, R. C., Ranganathan, S., and Gillespie, J. W. Jr. (1994). Analysis of Online Consolidation During the Thermoplastic Fiber Placement Process, In: Thermal Processing of Materials: Thermomechanics, Controls, and Composites, ASME-HTD-289 223-234, New York .

11.

11. Faude, E. and Steiner, K. (1993). Investigation and Design of a Cut-and-Restart Mechanism for the Robotic Tape Placement Process, CCM Tech. Report 93-39.

12.

12. Gillespie, J.W. (1997). Adjustable Hot Gas Torch Nozzle, U.S. Patent No. 5,626,472; issued May 6, 1997; co-inventors: Howie, I., Don, R.C. and Holmes, S.T.

13.

13. Pitchumani, R., Gillespie, J.W. Jr. and Lamontia, M.A. (1997). Design and Optimization of a Thermoplastic Tow-Placement Process with In-Situ Consolidation , Journal of Composite Materials, 31(3): 244-275 .

14.

14. Colton, J. and Leach, D. (1992). Processing Parameters for Filament Winding Thick-Section PEEK/Carbon Fiber Composites , Polymer Composites, 13(6): 427-434 .

15.

15. Pitchumani, R., Don, R.C. and Gillespie, J.W. Jr. (1994). Simulation of the Transients in Thermoplastic Fiber Placement , In: Proceedings of 9th International SAMPE Symposium, pp. 1521-1535 .

16.

16. Grove, S.M. (1998). Thermal Modeling of Tape Laying with Continuous Carbon Fiber-Reinforced Thermoplastic , Composites, 19(2): 367-375 .

17.

17. Tierney, J.J., Heider, D. and Gillespie, J.W. Jr. Welding of Thermoplastic Composites Using The Automated Tow Placement Process: Modeling and Control, ANTEC'97, pp. 1165-1170, Toronto .

18.

18. Martin, H. (1977). Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces, In: Harnett, J.P. and Irvine, T.F. Jr. (eds), Advances in Heat Transfer, Vol. 13, Academic Press, New York .

19.

19. Popiel, C.O. and Bogusiawski, L. (1986). Mass or Heat Transfer in Impinging Single Round Jets Emitted by a Bell-Shaped Nozzle and Sharp-Ended Orifice, In: Tien, C.L., Carey, V.P. and Ferrell, J.K. (eds), Heat Transfer 1986, Vol. 3, Hemisphere Publishing Corp., New York .

20.

20. Ranganathan, S., Advani, S.G. and Lamontia, Mark A. (1995). Non-isothermal Process Model for Consolidation and Void Reduction during In-situ Tow Placement of Thermoplastic Composites , Journal of Composite Materials, 29(8): 1040-1062 .

21.

21. Pitchumani, R., Ranganathan, S., Don, R.C., Gillespie, J.W. Jr. and Lamontia, M.A. (1996). Analysis of Transport Phenomena Governing Interfacial Bonding and Void Dynamics during Thermoplastic Tow-Placement , International Journal of Heat and Mass Transfer, 39(9): 1883-1897 .

22.

22. Mantell, S.C. and Springer, G.S. (1992). Manufacturing Process Models for Thermoplastic Composites , Journal of Composite Materials, 26(16): 2348-2377 .

23.

23. Tierney, J. and Material, J. (2002). Quality Development during the Automated Tow Placement Process, Ph.D. Dissertation, University of Delaware, Newark DE 19711.

24.

24. Heider, D., Don, R.C. and Gillespie, J.W. Jr. (1997). Model-Based Predictive Control for the Tow-Placement Technique , In: Proceedings of QNDE, San Diego, CA, August 27-September 2.

25.

25. Heider, D., Bradley, J.E., Don, R.C. and Gillespie, J.W. Jr. (1996). An Advanced Control Method for Thermoplastic Placement , In: Proceedings of the Second Conference on Nondestructive Evaluation applied to Process Control of Composite Fabrication, October 1-2, St. Louis, MO.