An Improved Thermal Lamination Model for Analysis of Heat Transfer in Composite Structures

Abstract

A new thermal lamination model and its associated finite element model are presented for analysis of heat transfer in laminated composite structures. The form of the present model closely resembles that of recent zig-zag sublaminate structural laminate theories. The through-thickness distribution of temperature is assumed to vary linearly within each ply, and continuity of transverse flux at ply interfaces is enforced analytically. Thus, the number of computational degrees-offreedom (DOFs) is made independent of the number of plies in the sublaminate. In its present form, the model contains only two computational DOFs in each sublaminate–the temperature at the top and bottom surface of the sublaminate. This model lends itself well to development of convenient and efficient finite element models, as demonstrated herein. Both linear and nonlinear numerical results are presented to demonstrate the effectiveness of the present approach.

Get full access to this article

View all access options for this article.

References

1. Rolfes, R. (1990). Efficient thermal analysis of anisotropic composite plates using new finite elements. In: Fuller, J. , Gruninger, G. , Schulte, K. , Bunsell, A.R. and Massiah, A. (eds.), Developments in the Science and Technology of Composite Materials. Proceedings of the 4th European Conference on Composite Materials. pp. 743–748.

2. Rolfes, R. (1991). Higher order theory and finite element for heat conduction in composites. In: Lewis, R.W. , Chin, J.H. and Homsy, G.M (eds.), Numerical Methods in Thermal Problems. Proceedings of the 7th International Conference. Vol. VII, Part 2. pp. 880–889.

3. Noor, A.K. and Tenek, L.H. (1992). Steady-state nonlinear heat transfer in multi-layered composite panels. ASCE Journal of Engineering Mechanics, 118: 1661–1679.

4. DiSciuva, M. (1987). An improved shear-deformation theory for moderately thick multilayered anisotropic shells and plates. Journal of Applied Mechanics, 54: 589–596.

5. Cho, M. and Parmerter, R.R. (1993). Efficient higher order composite plate theory for general lamination configurations. AIAA Journal, 31: 1299–1306.

6. Averill, R.C. and Yip, Y.C. (1996). Development of simple, robust finite elements based on refined theories for thick laminated beams. Computers & Structures, 59: 529–546.

7. Noack, J. and Rolfes, R. (1998). Efficient thermal analysis of hot structures using new finite elements. In: Proceedings of the European Conference on Spacecraft Structures, Materials and Mechanical Testing. 4–6 November, ESA SP-428. pp. 117–122.

8. Yip, Y.C. and Averill, R.C. (1996). Thick beam theory and finite element model with zig-zag sublaminate approximations. AIAA Journal, 34: 1627–1632.

9. Cho, Y.B. and Averill, R.C. (1997). An improved theory and finite element model for laminated beams using first order zig-zag sublaminate approximations. Composite Structures, 37: 281–298.

10.

10. Savoia, M. and Reddy, J.N. (1995). Three-dimensional thermal analysis of laminated composite plates. Int. J. Solid Structures, 32(5): 593–608.

11.

11. Kumar, K.T. and Yurko, A.A. (1989). Finite-element thermal modeling/analysis formulations for layered composite materials. Numerical Heat Transfer, Part B, 15: 73–97.

12.

12. ANSYS Inc. (1996). User’s Manual. Edn. 5.3.