Effect of Concrete Based Alkali Solutions on Short-Term Durability of E-Glass/Vinylester Composites

Abstract

Although the mechanisms of degradation of bare E-glass fibers by concrete based alkaline solutions are fairly well documented, the effects on ambient temperature cure E-glass/Vinylester composites have heretofore not been well investigated. This paper reports on the results of a study of effects on E-glass/Vinylester composites immersed in a number of concrete-based, and derived, solutions for a period of 18 months. It is shown that degradation is not merely due to pH levels, but to a combination of pH level and solution chemistry. The degradation is at the levels of the fiber-matrix interface and the fiber. A range of damage states are identified and correlated to changes in mechanical properties. In addition to tensile testing, dynamic mechanical thermal analysis, optical microscopy, and SEM/EDX analyses were conducted. It is shown that alkali salts do migrate by diffusion through the composite and by wicking along the fiber-matrix interface into the composite and can cause pitting of the fiber surface.

Keywords

E-glass/vinylester alkali concrete calcium hydroxide pH damage tensile tests DMTA SEM/EDX

Get full access to this article

View all access options for this article.

References

1. Yilmaz, Y.T. (1992). Chemical Attack on Alkali-Resistant Glass Fibers in a Hydrating Cement Matrix: Characterization of Chemical Products, Journal of Non-Crystalline Solids, 151: 236–244.

2. Cheikh, A.Al. and Murat, M. (1988). Kinetics of Non-Congruent Dissolution of E-Glass Fiber in Saturated Calcium Hydroxide Solution, Cement and Concrete Research, 18: 943–950.

3. Holmes, T.M. , Leatherman, G.L. and El-Korchi, T. (1991). Alkali-Resistant Oxynitride Glasses, Journal of Materials Research, 6(1): 152–158.

4. Schutte, C.L. (1994). Environmental Durability of Glass-Fiber Composites, Materials Science and Engineering, R13(7): 265–322.

5. Nanni, A. , Bakis, C.E. and Boothby, T.E. (1995). Test Methods for FRP-Concrete Systems Subjected to Mechanical Loads: State of the Art Review, Journal of Reinforced Plastics and Composites, 14: 524–588.

6. Porter, M.L. , Mehus, J. and Young, K.A. (1995). Aging Degradation of Fiber Composite Reinforcements for Structural Concrete, Final Report, 214-214 pp., Iowa State University, Engineering Research Institute.

7. Vijay, P.V. , Ganga Rao, H.V.S. and Kalluri, R. (1998). Hygrothermal Response of GFRP Bars Under Different Conditioning Schemes, In: Proceedings of CDCC ’98, pp. 243–252, Sherbrooke, Canada.

8. Ton-That, T.M. , Benmokrane, B. , Rahman, H. and Robert, J-F (1999). Durability Test of GFRP Rod in Alkaline Environment, In: Proceedings of the International Conference on Infrastructure Regeneration and Rehabilitation, pp. 553–566, Sheffield, UK.

9. Sen, R. , Mariscal, D. and Shahawy, M. (1993). Durability of Fiberglass Pretensioned Beams, ACI Structural Journal, 90(5): 525–533.

10.

10. Sen, R. Mariscal, D. and Shahawy, M. (1993). Investigation of S-2Glass/Epoxy Strands in Concrete, Fiber Reinforced Plastic Reinforcement for Concrete Structures, ACI-SP-138, pp. 15–33.

11.

11. Porter, M. and Barnes, B.A. (1998). Accelerated Durability of FRP Reinforcement for Concrete Structures, In: Proceedings of CDCC ’98, pp. 191–201, Sherbrooke, Canada.

12.

12. Anderson, G. , Bank, L. and Munley, E. (1994). Durability of Concrete Reinforced with Pultruded Fiber Reinforced Concrete Grating, In: Proceedings of the Composites Institute Annual Conference, 2-B, pp. 1–7.

13.

13. FRP Dowel Bar Team (1999). FRP Composite Dowel Bars, a 15 Year Durability Study, Composites Institute Report.

14.

14. Uomoto, T. and Nishimura, T. (1997). Development of New Alkali Resistant Hybrid AGFRP Rod, In: Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 2, pp. 67–74, Sapporo, Japan.

15.

15. Rostasy, F. (1997). On Durability of FRP in Aggressive Environments, In: Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 2, pp. 107–114, Sapporo, Japan.

16.

16. Hawkins, G.F. , Steckel, G.L. , Bauer, J.L., Jr. and Sultan, M. (1998). Qualification of Composites for Seismic Retrofit of Bridge Columns, In: Proceedings of CDCC ’98, pp. 25–36, Sherbrooke, Canada.

17.

17. Christensen, B.J. , Mason, T.O. and Jennings, H.M. (1992). Influence of Silica Fume on the Early Hydration of Portland Cements Using Impedence Spectroscopy, Journal of the American Ceramic Society, 75: 939-939.

18.

18. Conrad, J.O. , Bakis, C.E. , Boothby, T.E. and Nanni, A. (1998). Durability of Bond of Various FRP Rods in Concrete, In: Proceedings of CDCC ’98, pp. 299–310, Sherbrooke, Canada.

19.

19. Harper, J.F. and Naeem, M. (1989). The Moisture Absorption of Glass Fibre Reinforced Vinylester and Polyester Composites, Materials and Design, 10(6): 297–300.

20.

20. Weitsman, Y.A. (1990). A Continuum Diffusion Model for Viscoelastic Materials, Journal Phys. Chem., 94: 961–968.

21.

21. Mills, R.H. (1981). Preferential Precipitation of Calcium Hydroxide on Alkali-Resistant Glass Fibers, Cement and Concrete Research, Vol. II, pp. 689–697.

22.

22. Chin, J.W. , Haight, M.R. , Hughes, W.L. and Nguyen, T. (1998). Environmental Effects on Composite Matrix Resins Used in Construction, In: Proceedings of CDCC ’98, pp. 229–242. Sherbrooke, Canada.