Thermoelastic Determination of KI and KII in an Orthotropic Graphite

Abstract

Motivated by difficulties in recording reliable data in the immediate vicinity of a crack tip, the general fracture mechanics concept often employed for isotropy of utilizing stresses which are valid away from the crack with distance measurements is extended to orthotropy. Specifically, stress intensity factors, KI and KII, for inclined cracks are determined here in a uniaxially-loaded orthotropic graphite–epoxy composite using measured temperatures and least-squares. An advantageous novel technique for evaluating the thermo-mechanical coefficients is also implemented by commingling numerical and measured information. The through cracks are inclined at either 85 or 45 with respect to the load, the latter also being the strong/stiff composite direction. Retaining higher-order terms in the stress representations enables using measured temperatures away from the crack. The present method of determining the two thermo-mechanical coefficients circumvents the challenges encountered when attempting to evaluate the largest thermo-mechanical coefficient from uniaxial coupons since this coefficient typically occurs in the weakest direction of the composite.

Get full access to this article

View all access options for this article.

References

1. Feng, Z., Zhang, D., Rowlands, R.E. and Sandor, B.I. (1992). Thermoelastic Determination of Individual Stress Components in Loaded Composites, Experimental Mechanics, 32: 89–95 .

2. Bowie, O.L. and Freese, C.E. (1972). Central Crack in Plane Orthotropic Rectangular Sheet , Int’l Jour. of Fracture Mech. 8(1): 49–58 .

3. Lakshmikantham, C. (March 1973). Analysis of Transverse Cracks in an Orthotropic Strip with Edge Stiffeners , Jour. Applied Mech., pp. 227–232 .

4. Shukla, A., Agarwal, B.D. and Bhushan, B. (1989). Determination of Stress Intensity Factor in Orthotropic Composite Materials using Strain Gages , Engr. Fracture Mech., 32(3): 469–477 .

5. Saxce, G.D. and Kang, C.H. (1992). Application of the Hybrid Mongrel Displacement Finite Method to the Computation of Stress Intensity Factors in Anisotropic Material , Engr. Fracture Mech., 41(1): 71–83 .

6. Ju, S.H., Lesniak, J.R. and Sandor, B.I. (1997). Numerical Simulation of Stress Intensity Factors via Thermoelastic Techniques , Experimental Mechanics, 37: 278–284 .

7. Hawong, J.S., Suh, J.G. and Rowlands, R.E. (1995). Measuring Stress Intensity Factor in Orthotropic Materials using SPATE , Conf. on Product Liability and Technical Insurance, Vienna.

8. Dally, J.W. and Riley, W.F. (1991). Experimental Stress Analysis, McGraw-Hill, New York .

9. Kobayashi, A.S. (1993). Handbook of Experimental Stress Mechanics, 2nd edn, VCH Publications, New York .

10.

10. Bearden, K., Dally, J.W. and Sanford, R.J. (2001). Experimental Determination of KI for Short Internal Cracks , Journal of Applied Mechanics, 68: 937–943 .

11.

11. Lekhnitskii, S.G. (1963). Theory of Elasticity of an Anisotropic Body, Holden-Day, San Francisco .

12.

12. Khalil, S.A., Sun, C.T. and Hwang, W.C. (1986). Application of a Hybrid Finite Element Method to Determine Stress Intensity Factors in Unidirectional Composites , Int. J. of Fracture, 31: 37–51 .

13.

13. Rauch, B.J. and Rowlands, R.E. (1993). Thermoelastic Stress Analysis, Chap. 14, In: Kobayashi, A.S. (ed), Handbook of Experimental Mechanics, 2nd edn, pp. 581–599, VCH Publishers, New York .

14.

14. Ju, S.H. (1996). Simulating Stress Intensity Factors for Anisotropic Materials by the Leastsquares Method , Int. J. of Fracture, 81: 283–297 .

15.

15. Ju, S.H. (1998). Simulating Three-dimensional Stress Intensity Factors by the Least-squares Method , International Journal for Numerical Method in Engineering 43: 1437–1451 .

Thermoelastic Determination of KI and KII in an Orthotropic Graphite–Epoxy Composite

Abstract

Get full access to this article

References