Finite Element Micromechanics for Stiffness and Strength of Wavy Fiber Composites

Abstract

In this paper, a micromechanical model of a composite lamina material with fiber waviness is described. Results are presented and discussed with regard to stiffness and strength predictions for composite lamina. A micromechanical model of a unit cell from periodically distributed unidirectional waved cylindrical fibers embedded within matrix is proposed to withdraw the different material stiffness parameters. Finite element analysis of the periodic unit cell characterizing the structural stiffness of the composite material is carried out to determine the average stress and strain components. The composite stress-strain relations are then employed to determine the stiffness parameters. Numerical results for a typical composite constituted of polymer matrix and carbon fibers in the form of periodically hexagonal packing and initially sinusoidal waviness are presented for different amplitude to wavelength ratios and a range of fiber volume fractions. The results reveal the presence of local periodic-antisymmetric stresses that are usually unaccounted for in conventional structural analysis. The potential influence of these stresses on failure prediction is discussed.

Keywords

fiber waviness stiffness micromechanics composites

Get full access to this article

View all access options for this article.

References

1. Adams, D.O. and Hyer, M.W. (1994). Effects of Layer Waviness on the Compression Fatigue Performance of Thermoplastic Composite Laminates, Fatigue, 16: 385-392.

2. Piggott, M.R. (1995). The Effect of Fiber Waviness on the Mechanical Properties of Unidirectional Fiber Composites - A Review, Composite Science and Technology, 53: 201-205.

3. Hsiao, H.M. and Daniel, I.M. (1996). Effect of Fiber Waviness on Stiffness and Strength Reduction of Unidirectional Composites under Compressive Loading, Composite Science and Technology, 56: 581-593.

4. Hsiao, H.M. and Daniel, I.M. (1996). Nonlinear Elastic Behavior of Unidirectional Composites with Fiber Waviness under Compressive Loading, ASME Journal of Engineering Materials and Technology, 118: 561-570.

5. Stecenko, T. and Piggott, M.R. (1997). Fiber Waviness and Other Mesostructures in Filament Wound Materials, Journal of Reinforced Plastics and Composites, 16: 1659-1674.

6. De Morais, A.B. and Marques, A.T. (1997). A Micromechanical Model for the Prediction of the Lamina Longitudinal Compression Strength of Composite Laminates, Journal of Composite Materials, 31(14): 1397-1412.

7. Joyce, P.J. , Kugler, D. and Moon, T.J. (1997). A Technique for Characterizing Process-Induced Fiber Waviness in Unidirectional Composite Laminates - Using Optical Microscopy, Journal of Composite Materials, 31(17): 1694-1727.

8. Bradley, D.J. , Adams, D.O. and Gascoigne, H. E. (1998). Interlaminar Strains and Compressive Strength Reductions due to Nested Layer Waviness in Composite Laminates, Journal of Reinforced Plastic and Composites, 17(11): 989-1011.

9. Wisnom, M.R. and Atkinson, J.W. (2000). Fiber Waviness Generation and Measurement and Its Effect on Compressive Strength, Journal of Reinforced Plastics and Composites, 19: 96-110.

10.

10. Chun, H-J. , Shin, J-Y. and Daniel, I.M. (2001). Effect of Material Geometric Nonlinearities on the Tensile and Compressive Behavior of Composite Materials with Fiber Waviness, Composite Science and Technology, 61: 125-134.

11.

11. Highsmith, A.L. , Davis, J.J. , and Helms K. L. E. (1992). The Influence of Fiber Waviness on the Compressive Behavior of Unidirectional Continuous Fiber Composites, Composite Materials: Testing and Design, Vol. 10, pp. 20-36, ASTM STP 1120, American Society for Testing and Materials, Philadelphia.

12.

12. ABAQUS Standard Finite Element Software (2002). ABAQUS, Inc. USA.

13.

13. Mayes, J.S. (1999). Multicontinuun Failure Analysis of Composite Structural Analysis, PhD Dissertation, University of Wyoming.

14.

14. Garnich, M.R. and Hansen, A.C. (1997). A Multicontinuum Approach to Structural Analysis of Linear Viscoelastic Composite Materials, ASME Journal of Applied Mechanics, 64: 795-803.

15.

15. Garnich, M.R. and Hansen, A.C. (1997). A Multicontinuum Theory for Thermal-Elastic Structural Analysis of Composites, Journal of Composite Materials, 31(1): 71-86.

16.

16. Mayes, J.S. and Hansen, A.C. (2001). Multicontinuum Failure Analysis of Composite Structural Laminates, Mechanics of Composites Materials and Structures, 8(4): 249-262.

17.

17. Tsai, S.W. and Wu, E.M. (1971). A General Theory of Strength of Anisotropic Materials, Journal of Composite Materials, 5: 58-69.

18.

18. Narayanaswami, R. and Adelman, H.M. (1977). Evaluation of the Tensor Polynomial and Hoffman Strength Theories for Composite Materials, Journal of Composite Materials, 11: 366-377.