A Feasible Methodology for Engineering Applications in Damage Tolerance of Composite Sandwich Structures

Abstract

In this paper, a feasible methodology is proposed for the damagetolerant design of composite sandwich structures and the residual safety evaluation of low-velocity impacted composite sandwich structures. This methodology is based upon the implementation of an event-driven failure criterion called Damage Propagation Criterion. In this criterion, the impact-damaged composite sandwich structure is considered to be unsafe if the damage will propagate to a specified characteristic location near the damage zone under the desired compressive load. The critical far field stress corresponding to the initiation of damage propagation at the specified characteristic location is used as the only characteristic value in this criterion. For a sandwich structure with low-velocity impact damage, this critical far field stress can be determined through either Sandwich Compression After Impact (SCAI) test or numerical analysis by using a modified analytical model or a nonlinear finite element model. Both the experimental and numerical approaches are briefly introduced with examples in this paper. At the end of this paper, the feasible methodology is introduced for the engineering applications in damage-tolerant design of composite sandwich structures and the residual safety evaluation of impact-damaged composite sandwich panels.

Keywords

sandwich structures composite damage tolerance impact failure criterion

Get full access to this article

View all access options for this article.

References

1. Kassapoglou, C. , Jonas, P.J. and Abbott, R. (1988). Compressive Strength of Composite Sandwich Panels After Impact Damage: An Experimental and Analytical Study, Journal of Composite Technology & Research, Summer 1988, 10: 65–73.

2. Lie, Simon C. (1989). Damage Resistance and Damage Tolerance of Thin Composite Facesheet Honeycomb Panels, TELAC Report 89–83.

3. Cairns, Douglas S. (1987). Impact and Post Impact Response of Graphite/Epoxy and Kevlar/Epoxy Structures, TELAC Report 87–15.

4. Kassapoglou, C. (1988). Buckling, Postbuckling, and Failure of Elliptical Delaminations in Laminates Under Compression, Composite Structures, 9: 139–160.

5. Minguet, P.J. (April 1991). A Model for Predicting the Behavior of Impact-Damaged Minimum Gage Sandwich Panels under Compression, In: Proceedings of the AIAA/ASME/ASCE/AHS/ASC 32nd Structures, Structural Dynamics, and Materials Conference, pp. 1112–1122, Baltimore, MD.

6. Tsang, P.H.W. (June 1994). Impact Resistance and Damage Tolerance of Composite Sandwich Panels, Ph.D. Dissertation, Massachusetts Institute of Technology.

7. Moody, R.C. and Vizzini, A.J. (June 2001). Incorporation of a Compliance Change Due to Impact in the Prediction of Damage Growth in Sandwich Panels, In: Proceedings of the 13th International Conference on Composite Materials, Beijing, China.

8. Moody, R.C. and Vizzini, A.J. (January 2000). Damage Tolerance of Composite Sandwich Panels, DOT/FAA/AR-99/91.

9. Lekhnitskii, S.G. (1981). Theory of Elasticity of an Anisotropic Body, Mir Publishers.

10.

10. Lagace, P.A. , Tsang, P.H.W. and Williamson, J.E. (1990). Damage Resistance and Damage Tolerance of AMOCO ERLX-1983 3K-70 PW Sandwich Panels, TELAC Report 90–91.

11.

11. Moody, R.C. (2002). Damage Tolerance of Impacted Composite Sandwich Panels, Thesis for Master of Science, University of Maryland at College Park.

12.

12. Xie, Z. and Vizzini, A.J. (October 2002). A Modified Analytical Model for Damage Propagation of a Low Velocity Impacted Sandwich Panel, In: Proceeding of the 17th Annual Technical Conference of American Society for Composites, West Lafayette, IN, CD-ROM, paper #150.

13.

13. Xie, Z. (2003). Damage Tolerance of Low Velocity Impacted Composite Sandwich Structures, Ph.D. dissertation, University of Maryland at College Park.

14.

14. Xie, Z. and Vizzini, A. J. (September 2001). The Presence of a Delamination in Damage Growth of an Impacted Sandwich Panel, In: Proceeding of the 16th Annual Technical Conference of American Society for Composites, Blacksburg, VA.

15.

15. Chia, C.Y. (1980). Nonlinear Analysis of Plates, McGraw-Hill Inc.

16.

16. Mallick, P.K. (1988). Fiber-reinforced Composites Materials, Manufacturing and Design, Marcel Dekker Inc.