Visual Experiments for Water Absorbing Process of Fiber-Reinforced Composites

Abstract

It is important to understand the aging mechanism of composites for their use in wet and thermal environments. Many researchers have carried out experiments or applied mathematic methods, such as finite element analysis (FEA) and Fick-diffusion law to establish a water-absorption-mechanism-model of composites. However, some visual experiments of the process have not been provided up to the present. In this paper, substituting CuSO4 powder for resins, visual experiments were carried out to qualitatively simulate the capillarity and watersorption process of a few fiber-reinforced composites under wet and thermal environments. In experiments, three kinds of fibers were used: amide fiber (including kevlar29 and kevlar49), poly- p-phenylenebenzobisoxazole fiber (PBO fiber), and carbon fiber (T300). The results showed that because of the capillarity, water molecules will enter rapidly the interface of composites between fibers and resin, and at the same time diffuse into the resin. Therefore, the interface is badly damaged and the performances of whole composites decrease after the process. The aim of our experiments is to prove the process visually in a unique technology.

Keywords

fiber absorbing water capillarity composites visual experiment

Get full access to this article

View all access options for this article.

References

1. Da, Youxian , Chun, Haijiang and Sun, Mujin (1996). Studies on the Behavior Sorption of Aromatic Polyamide Fibers, Journal of Composites, 13(4): 3–5 (in Chinese).

2. Wang, Bin , Qiu, Zheming and Yang, Jiankui (1995). Effect of Grafting of F-12 Aramid Fiber on Interlaminar Shear Properties of Composite, Journal of Solid Rocket Technology, 18(1): 64–68 (in Chinese).

3. Wang, Yulin , Wan, Yizao , Chen, Guicai , Zhou, Fugang and Cheng, Guoxiang (2002). Moisture Absorption Behavior of 3D Carbon-Fiber-Epoxy Composites and Effect of External Stress, Journal of Composites, 19(6): 101–105 (in Chinese).

4. Chateauminois, A. , Vincent, L. and Chabert, B. (1994). Study of the Interfacial Degradation of a Glass-epoxy Composite During Hygrothermal Ageing using Water Diffusion Measurements and Dynamic Mechanical Thermal Analysis, Polymer, 35: 4766–4774.

5. Komai, K. , Minoshima, K. and Shiroshita, S. (1991). Hygrothermal Degration and Fracture Process of Advanced Fiber-reinforced Plastics, Mater Sci. Engin., 143A: 155–166.

6. Nairn, John, A. (1985) Thermoelastic Analysis of Residual Stresses in Unidirectional, Highperformance Composites, Polymer Composites, 6(2): 123–130.

7. Schadler, Linda S. , Koczak, Michael J. and Maher, Amer (1995). Environmental Effects on Interface Behavior in Graphite/Epoxy Single Fiber Composites, Materials Research Society Symposium – Proceedings, Polymer/Inorganic Interfaces II, 385: 155–166.

8. Amer, M.S. , Koczak, M.J. and Schadler, L.S. (1996). Relating Hydrothermal Degradation in Single Fiber Composites to Degradation Behaviour in Bulk Composites, Composites Part A, 27A: 861–867.

9. Bao, Li-Rong and Yee, Albert F. (2002). Moisture Diffusion and Hygrothermal Aging in Bismaleimide Matrix Carbon Fiber Composites: Part II – Woven and Hybrid Composites, Composites Science and Technology, 62: 2111–2119.

10.

10. Selzer, R. and Friedrich, K. (1997). Mechanical Properties and Failure Behaviour of Carbon Fiber-reinforced Polymer Composites under the Influence of Moisture, Composites Part A, 28A: 595–604.

11.

11. Zhou, Jiming and Lucas, James P. (1995). The Effects of a Water Environment Onanomalous Absorption Behavior in Graphite/Epoxy Composites, Composites Science and Technology, 53: 57–64.

12.

12. Camino, G. , Luda, M.P. , Polishchuk, A. Ya , Revellino, M. and Blancon, R. et al. (1997). Kinetic Aspects of Water Sorption in Polyester Resin/Glass Fiber Composites, Composites Science and Technology, 57: 1469–1482.

13.

13. Atkins, P.W. (1990). Physics-chemistry, Higher Education Publisher, China.

14.

14. Merdas, I. , Thominette, F. , Tcharkhtich, A. and Verdu, J. (2002). Factors Governing Water Absorption by Composite Matrices, Composites Science and Technology, 62: 487–492.

15.

15. Seferis, James C. and Chung, Kimo et al. (2000). Heat and Water Mass Transfer Modeling in Polyimide Based Advanced Composites, Polymer Degradation and Stability, 68: 43–51.