Energy Release Rate Prediction in Stiffened-skin Structure Using a Three-dimensional Crack Tip Element Analysis

Abstract

Total energy release rates and energy release rate components are predicted for a stiffened-skin structure that is loaded in bending and which contains a delamination between its skin and a hat-shaped stiffener. This is done using threedimensional crack tip element and three-dimensional finite element analyses. An isotropic configuration and a variety of graphite/epoxy layups are considered, for which the two analyses are shown to be in good agreement. The results indicate the practicality of, and considerable computational savings that may be achieved by, employing crack tip element analyses for energy release rate assessments in realistic structural geometries. They are also used to qualitatively examine the effects of layup on energy release rate distributions in this geometry.

Keywords

delamination mode mix skin–stringer finite element crack tip element energy release rate

Get full access to this article

View all access options for this article.

References

Davidson, B.D. , Hu, H. and Schapery, R.A. (1995). An Analytical Crack Tip Element for Layered Elastic Structures , Journal of Applied Mechanics, 62: 294–305 .

Schapery, R.A. and Davidson, B.D. (1990). Prediction of Energy Release Rate for Mixed-Mode Delamination Using Classical Plate Theory , Applied Mechanics Reviews, 43(5): S281–S287 .

Davidson, B.D. , Hu, H. and Yan, H. (1996). An Efficient Procedure for Determining Mixed-Mode Energy Release Rates in Practical Problems of Delamination , Finite Elements in Analysis and Design, 23: 193–210 .

Davidson, B.D. , Yu, L. and Hu, H. (2000). Determination of Energy Release Rate and Mode Mix in Three-Dimensional Layered Structures Using Plate Theory , International Journal of Fracture, 105(1): 81–104 .

Yu, L. and Davidson, B.D. (2001). A Three-Dimensional Crack Tip Element for Energy Release Rate Determination in Layered Elastic Structures , Journal of Composite Materials, 35(6): 457–488 .

Davidson, B.D. (1994). Energy Release Rate Determination for Edge Delamination Under Combined In-Plane, Bending, and Hygrothermal Loading. Part I – Delamination at a Single Interface , Journal of Composite Materials, 28: 1009–1031 .

Davidson, B.D. (1994). Energy Release Rate Determination for Edge Delamination Under Combined In-Plane, Bending, and Hygrothermal Loading. Part II – Two Symmetrically Located Delaminations , Journal of Composite Materials, 28: 1371–1392 .

Davidson, B.D. and Hu, H. (1995). Effect of Interlayer Modulus on Fracture Mode Ratio for Interleaved Composite Laminates , Engineering Fracture Mechanics, 52(2): 243–253 .

Davidson, B.D. and Krafchak, T.M. (1993). Analysis of Instability-Related Delamination Growth Using a Crack Tip Element , AIAA Journal, 31(11): 2130–2136 .

10.

Whitney, J.M. (1987). Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing Company, Inc.

11.

Davidson, B.D. , Gharibian, S.J. and Yu, L. (2000). Evaluation of Energy Release Rate-Based Approaches for Predicting Delamination Growth in Laminated Composites , International Journal of Fracture, 105(4): 343–365 .

12.

Davidson, B.D. , Yu, L. , Lundberg, S.D. and Rao, M.L. (2005). Accuracy Assessment of a Three Dimensional, Crack Tip Element Based Approach for Predicting Delamination Growth in Stiffened-Skin Geometries , International Journal of Fracture, 132(1): 1–32 .

13.

Rybicki, E.F. and Kanninen, M.F. (1977). A Finite Element Calculation of Stress Intensity Factors by a Modified Crack Closure Integral , Engineering Fracture Mechanics, 9: 931–938 .

14.

Vintilescu, I. and Spelt, J. (1998). Mixed Mode I, II, and III Fracture Characterization of Adhesive Joints , Journal of Composites Technology and Research, 20(2): 129–139 .

15.

Konig, M. , Kruger, R. and Rinderknecht, S. (2000). Finite Element Analysis of Delamination Growth in a Multidirectional Composite ENF Specimen, In: Grant, P. and Rousseau, C.Q. (eds), Composite Structures: Theory and Practice, ASTM STP 1383, American Society for Testing and Materials, Philadelphia, PA, USA , pp. 345–365.

16.

Reeder, J.R. (1993). A Bilinear Failure Criterion for Mixed-Mode Delamination, In: Camponeschi, E.T. Jr. (ed.), Composite Materials: Testing and Design, ASTM STP 1206, American Society for Testing and Materials, Philadelphia, PA, USA , pp. 303–322.

17.

Davidson, B.D. , Bialaszewski, R.D. and Sainath, S.S. A Non-Classical, Energy Release Rate-Based Approach for Predicting Delamination Growth in Graphite Reinforced Laminated Polymeric Composites, To Appear in Composites Science and Technology.