Mechanisms and Structural Parameters Affecting the Interlaminar Stress Field in Laminates with Ply Drop-offs

Abstract

The mechanisms and structural parameters affecting the interlaminar stress field in laminates with ply drop-offs have been investigated to help better understand the effects of different parameters in such laminates. Based on equilibrium considerations, two fundamental mechanisms that give rise to interlaminar stresses have been identified: the termination effect, caused by the load transfer from the terminated ply group to the continuous ply groups; and the offset effect, caused by the redistribution of the load in the outer continuous ply groups through an offset in the through-thickness direction from the undropped region to the dropped region. The characteristics of the two mechanisms and the factors that affect the inter-laminar stress field caused by these mechanisms are described by considering two specific laminate configurations in which these mechanisms can be isolated. Factors of particular importance are the magnitudes of the far-field loads in the terminated and outer continuous ply groups, the offset distance, and the taper angle. Parametric studies of five factors are conducted via an analytical method for configurations under in-plane and bending loads to obtain general trends of the interlaminar stress field and a better understanding of the contributions of the two fundamental mechanisms. The structural parameters considered are the taper angle, the location of the terminated plies, the overall stiffness and layup sequence of the terminated ply group, and the number of terminated plies. The overall characteristics and trends of the interlaminar stresses can be explained easily in terms of the two fundamental mechanisms. The current study presents a clear view of the mechanisms giving rise to interlaminar stresses. Such a perception can be used to understand and anticipate interlaminar stress field trends in generic laminates with ply drop-offs in a simple and systematic manner. This can be particularly useful in preliminary design where these trends can be anticipated for the many configurations often under consideration, without performing actual analysis of these many potential configurations.

Keywords

ply drop-off interlaminar stress(es)delamination termination effect offset effect structural parameter

Get full access to this article

View all access options for this article.

References

Kemp, B.L. and Johnson, E.R. (1985). Response and Failure Analysis of a Graphite-Epoxy Laminate Containing Terminating Internal Plies , In: Proceedings of the 26th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Monterey, CA, AIAA Paper No. 85-0608.

Vizzini, A.J. and Lee, S.W. (1995). Damage Analysis of Composite Tapered Beams , Journal of the American Helicopter Society, 40(2): 43-49 .

Lagace, P.A. and Cannon, R.K. (1988). Effects of Ply Dropoffs on the Tensile Behavior of Graphite/Epoxy Laminates , In: Proceedings of the 4th Japan-US Conference on Composite Materials, Washington, DC.

Cui, W. , Wisnom, M.R. and Jones, M.I. (1994). Effect of Through Thickness Tensile and Compressive Stresses on Delamination Propagation Fracture Energy , Journal of Composites Technology & Research, 16(4): 329-335 .

Fish, J.C. and Lee, S.W. (1989). Delamination of Tapered Composite Structures , Engineering Fracture Mechanics, 4(1): 43-54 .

Murri, G.B. , Salpekar, S.A. and O’Brien, T.K. (1991). Fatigue Delamination Onset Prediction in Unidirectional Tapered Laminates, In: O’Brien, T.K. (ed.), Composite Materials: Fatigue and Fracture, Vol. 3, ASTM STP 1110, pp. 312-339, American Society for Testing and Materials, Philadelphia, PA .

Lee, S. and Knauss, W.G. (2000). Failure of Laminated Composites at Thickness Discontinuities Under Complex Loading and Elevated Temperatures , International Journal of Solids and Structures, 37(25): 3479-3501 .

Murri, G.B. , O’Brien, T.K. and Salpekar, S.A. (1993). Tension Fatigue of Glass/Epoxy and Graphite/Epoxy Tapered Laminates , Journal of the American Helicopter Society, 48(Jan.): 29-37 .

Vizzini, A.J. (1995). Influence of Realistic Ply-drop Geometries on Interlaminar Stresses in Tapered Laminates, In: Martin, R.H. (ed.), Composite Materials: Fatigue and Fracture, Vol. 5, ASTM STP 1230, pp. 467-485, American Society for Testing and Materials, Philadelphia, PA .

10.

Wisnom, M.R. (1991). Delamination in Tapered Unidirectional Glass Fibre-Epoxy Under Static Tension Loading , In: Proceedings of the 30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Baltimore, MD, AIAA Paper No. 91-1142-CP.

11.

Shim, D.J. and Lagace, P.A. (2005). An Analytical Method for Interlaminar Stress Analysis Due to Global Effects of Ply Drop-offs , Mechanics of Advanced Materials and Structures, 12(1): 21-32 .

12.

Shim, D.J. (2002). Role of Delamination and Interlaminar Fatigue in the Failure of Laminates with Ply Dropoffs, TELAC Report, PhD Thesis, Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, MA.