Utilization of Waste Silk Fabric as Reinforcement in Epoxy Phenol Cashew Nut Shell Liquid Toughened Epoxy Resin: Studies on Mechanical Properties

Abstract

The objective of this study was to investigate the properties of toughened resin composites with silk fabric as the reinforcement, and Epoxy Phenol Cashew Nut Shell Liquid (EPCNSL) toughened epoxy as the matrix system. Different blend matrices were prepared by incorporating varying weight fractions of EPCNSL (5, 10, 15, 20, and 25%) in epoxy, and these matrices were subjected to mechanical strength analysis. Among the combinations of the blend matrices studied, the blend matrix containing 20 wt% of EPCNSL in epoxy showed highest strength, which was chosen to prepare composites. The mechanical properties of the EPCNSL toughened epoxy composites reinforced with silk fabric were studied with respect to varying weight fractions of silk fabric loading. The mechanical properties were found to increase with the increase in weight fraction of the silk fabric. The interfacial bonding between the reinforcement and the matrix was examined using SEM micrographs. Finally, the properties of the toughened resin composites were compared to those of pure epoxy/silk composites.

Keywords

composites epoxy EPCNSL toughened epoxy silk fabric tensile strength flexural strength impact strength

Get full access to this article

View all access options for this article.

References

Oksman, K. , Wallstrom, L. , Lars, Berglund, A. and Filho, R.D.T. (2002). Morphology and Mechanical Properties of Unidirectional Sisal-Epoxy Composites, J . Appl. Poly. Sci., 84: 2358–2365 .

Jayaraman, Krishnan (2003). Manufacturing Sisal Propylene Composites with Minimum Fibre Degradation, Comp . Sci & Tech., 63: 367–374 .

Khondher, O.K. , Fukui, T. , Nakai, A. and Hamada, H. (2004). Initial Fracture of the Welt-weft Knitted Textile Composites , Composites Part A., 35: 1195–1205 .

Chand, N. and Rohatgi, P.K. (1987). Tensile and Impact Behavior of Chopped Sun-hemp – Polyester Composites , Eur. Polym. J., 23: 249–251 .

Pearson, R.A. and Yee, A.F. (1989). Toughening Mechanisms in Elastomer-Modified Epoxies Part 3: The Effect of Cross-Link Density , J. of Mat. Sci., 24: 2571–2579 .

Pearson, R.A. and Yee, A.F. (1991). Influence of Particle Size and Particle Size Distribution on Toughening Mechanisms in Rubber-modified Epoxies , J. of Mat. Sci., 26: 3828–3844 .

Abad, M.J. , Barrel, L. , Cano, J. , Lopez, J. , Nogneeira, P. , Ramirez, C. and Torries, A. (2001). Thermal Decomposition Behaviour and the Mechanical Properties of an Epoxy/Cycloaliphatic Amine Resin with ABS , Eur. Polym. J., 37: 1613–1623 .

Xuezeng Song , Sixun Zheng , Jinyu Huang , Pingping Zhu , and Qipeng Guo (2001). Miscibility and Mechanical Properties of Tetrafunctional Epoxy Resin/Phenolphthalein Poly(Ether Ether Ketone) Blends , J. Appl. Polym. Sci., 79: 598–607 .

Trong Ming Don , Chao Hsein Yeh and Bell, J.P. (1999). Structure and Properties of PC-modified Epoxies from Two different Blending Processes , J. Appl. Polym. Sci., 74: 2510–2521 .

10.

Scherzer, N. (1994). Characterization of Diol Modified Epoxy Resins by Near and Mid Infrared Spectroscopy , J. of App. Poly. Sci., 51: 491–500 .

11.

Urbaczewski, E. , Pascault, J.P. , Sautereau, H. , Riccardi, C.C. , Moschiar, S.S. and Williams, R.J.J. (1990). Utilization of Diglycidyl Ether of 1,4-butanediol for Toughening Epoxy/Amine Networks , Macromol. Chemi., 191: 943–951 .