Effect of Graphite and/or Silicon Carbide Particles Addition on the Hardness and Surface Roughness of Al-4 wt% Mg Alloy

Abstract

In this study, the fabrication of Al-4 wt% Mg-graphite and/or silicon carbide (SiC) particulate composites is described. Composites of Al-4 wt% Mg alloy with different volume percentage values of graphite and/or SiC particles are prepared using the compocasting technique. In this technique, graphite particles and/or SiC particles are added into a semi-solid slurry during the stirring of the melt. A pitched blade stirrer is used to stir the reinforcement particles in the slurry. The slurry is then poured in a metallic mold to obtain the cast composites. The effect of the addition of graphite and/or SiC particles and porosity content on the Rockwell hardness and machinability is studied in the present work. The results show that the porosities increase with increase in particles content while Rockwell hardness decreases with increase of graphite particles. But SiC particles are found to increase the hardness of composites. Surface roughness improves with graphite content in the cast composite, and poor surface finish is obtained when SiC particles are added.

Keywords

pitched blade stirrer hybrid composites metal matrix composite

Get full access to this article

View all access options for this article.

References

Berghhezan, A. (1978). Basic Design Concepts and Specific Methods for the Fabrication of Metal Matrix Composite Material, Applied Science Publishers Ltd, London, pp. 5-8.

Sehwartez, M. M. (1984). Composite Materials Handbook, McGraw-Hill Book Company, London, pp. 1.3-1.5.

Esra, A. C. (1999). Determination of Properties of SiC Reinforced Aluminum Metal Matrix Composites by Ultrasonic Techniques, Journal of Materials Processing Technology, 92: 184-196.

Sharma, S. C. (2001). The Sliding Wear Behavior of Al 6061-Garnet Particulate Composites, Wear, 249: 1036-1045.

Iwai, Y. , Hidetomo, Y. and Tomomi, H. (1995). Sliding Wear Behavior of SiC Whisker-reinforced Aluminum Composites, Wear, 181: 594-602.

Lin, C. B. , Chang, R. J. and Weng, W. P. (1998). A Study on the Process and Tribological Behavior of Al/Grp Composite, Wear, 217: 167-174.

Riahi, A. R. and Alpas, A. T. (2001). The Role of Tribo-layer on the Sliding Wear Behavior of Graphitic Aluminum Matrix Composites, Wear, 251: 1396-1407.

Miyajima, T. and Iwai, Y. (2003). Effect of Reinforcements on Sliding Wear Behavior of Aluminum Composites, Wear, 255: 606-616.

Ghosh, P. K. and Ray, S. (1984). Effect of Porosities on the Strength and Hardness of Particulate Composites, Metallkunde, 75: 1667-1674.

10.

Sahin, Y. (2003). Preparation and Some Properties of SiC Particle Reinforced Aluminum Alloy Composites, Materials and Design, 24: 671-679.