Antenna Integration with Composite Sandwich Structures using Gain Enhancement Methods

Abstract

In this study, a new design method for antenna-integrated composite sandwich structures is proposed. First, the effects of sandwich geometry on antennas are investigated in the transmission line analogy. Changes in the gain of an antenna due to a sandwich geometry have been determined. For a facesheet layer, the condition that provides the greatest antenna gain is called the open condition and it is exploited to allow the presence of an antenna in the sandwich structure without loss of antenna performance. Two types of structures are designed, one which uses a stacked-patch microstrip antenna, and the other using an aperture-coupled microstrip antenna for wideband performance. The measured electrical performances of these fabricated structures show that the gains are superior to original antennas, and bandwidths are as wide as specified in the requirements of the present study. Structural performances are the same as those of a conventional sandwich structure, according to the three-point bending test, so that perfect integration is confirmed without reducing either of the mechanical and electrical performances.

Keywords

smart structure sandwich structure antenna honeycomb.

Get full access to this article

View all access options for this article.

References

Lockyer, A.J. , Alt, K.H. , Coughlin, D.P. , Durham, M.D. , Kudva, J.N. , Goetz, A.C. and Tuss, J. (1999). Design and Development of a Conformal Load-bearing Smart-Skin Antenna: Overview of the AFRL Smart Skin Structures Technology Demonstration (S3TD), Proceedings of SPIE, Vol. 3674, pp. 410—424.

Lockyer, A.J. , Kudva, J.N. , Kane, D. , Hill, B.P. , Martin, C.A. , Goetz, A.C. and Tuss, J. (1994). Qualitative Assessment of Smart Skins and Avionics/Structures Integration, Proceedings of SPIE, Vol. 2189, pp. 172—183.

Tuss, J. , Lockyer, A. , Alt, K. , Uldirich, F. , Kinslow, R. , Kudva, J. and Goetz, A. (1996). Conformal Loadbearing Antenna Structure, In: 37th AIAA Structural Dynamics and Materials Conference (Salt Lake City, UT), AIAA—96-1415-CP, pp. 836—843.

http://www.delphi.com, Delphi Fuba Multiple Antenna Reception System.

You, C.S. , Lee, R.M. , Hwang, W. , Park, H.C. and Park, W.S. (2003). Microstrip Antenna for SAR Application with Composite Sandwich Construction: Surface Antenna Structure Demonstration, Journal of Composite Materials, 37(4): 351—364.

Jeon, J.H. , You, C.S. , Kim, C.K. , Hwang, W. , Park, H.C. and Park, W.S. (2002). Design of Microstrip Antennas with Composite Laminates Considering their Structural Rigidity, Mechanics of Composite Materials, 38(5): 447—460.

You, C.S. and Hwang, W. (2004). Design and Analysis of Multilayer Surface-antenna-structure , Key Engineering Materials, 270—273: 2152—2157.

Pozar, D.M. (1992). Microstrip Antennas, In: IEEE Proceedings, Vol. 80, No. 1, pp. 79—91.

Carver, K.R. and Mink, J.W. (1981). Microstrip Antenna Technology, IEEE Trans. Antennas Propagat., 29(1): 2—24.

10.

Jackson, D.R. and Alexopoulos, N.G. (1985). Gain Enhancement Methods for Printed Circuit Antennas, IEEE Trans. Antennas Propagat. , 33(9): 976—987.

11.

Alexopoulos, N.G. and Jackson, D.R. (1984). Fundamental Superstrate (cover) Effects on Printed Circuit Antennas, IEEE Trans. Antennas Propagat., 32(8): 807—816.

12.

Shen, X.-H. , Vandenbosch, G.A.E. and de Capelle, A.R.V. (1995). Study of Gain Enhancement Method For Microstrip Antennas using Moment Method, IEEE Trans. Antennas Propagat., 43(3): 227—231.

13.

Shen, X.-H. , Delmotte, P. and Vandenbosh, G.A.E. (2001). Effect of Superstrate on Radiated Field of Probe Fed Microstrip Patch Antenna, IEE proc. —Microw. Antennas Propag., 148(3): 141—146.

14.

You, C.S. , Hwang, W. and Eom, S.Y. (2005). Design and Fabrication of Composite Smart Structures for Communication, using Structural Resonance of Radiated Field, Smart Materials and Structures, 14: 441—448.

15.

Allen, H.G. (1996). Analysis and Design of Structural Sandwich Panels , Pergamon Press, Oxford, pp. 1—10.

16.

Zenkert, D. (1997). An Introduction to Sandwich Construction, EMAS Pub., pp. 1—10.

17.

You, C.S. (2004). Design and Fabrication of Composite Smart Structures for Communication, Chap. 2: Effect of a Dielectric Cover on Microstrip Antennas by T/R Methods, PhD Thesis, Pohang University of Science and Technology, Postech, South Korea.

18.

Lee, R.Q. , Lee, K.F. and Bobinchak, J. (1987). Characteristics of a Two-layer Electromagnetically Coupled Rectangular Patch Antenna, Electronics Letters, 23(20): 1070—1072.

19.

Lee, R.Q. and Lee, K.F. (1989). Effects of Parasitic Patch Sizes on Multi-layer Electromagnetically Coupled Patch Antenna, IEEE/AP-S International Symposium Digest, 2: 624—627.

20.

Pozar, D.M. (1985). Microstrip Antenna Aperture Coupled to a Microstripline, Electronics Letters, 21(2): 49—50.

21.

Zürcher, J.F. (1988). The SSFIP: A Global Concept for High-Performance Broadband Planar Antennas, Electronics Letters, 24(23): 1433—1435.

22.

Kim, D.S. (2004). Design of Multilayer Composite-Antenna-Structures Considering Adhesive Effects, Ms Thesis, Pohang University of Science and Technology, Postech, South Korea.